基于计算机声卡的虚拟仪器的设计

主要介绍通过计算机的声卡来实现对虚拟仪器的设计，模拟了示波器、信号发生器和频率计等设备的基本功能，详细介绍了系统的硬件设计方法及软件流程。该系统主要适用于音频范围的各种信号的采集与产生。     

Improving forecasting performance by employing the Taguchi method

To satisfy the volatile nature of today’s markets, businesses require a significant reduction in product development lead times. Consequently, the ability to develop precise product sales forecasts is of fundamental importance to decision-makers. Over the years, many forecasting techniques of varying capabilities have been introduced. The precise extent of their influences, and the interactions between them, has never been fully clarified, although various forecasting factors have been explored in previous studies. Accordingly, this study adopts the Taguchi method to calibrate the controllable factors of a forecasting model. An L₉(3⁴) inner orthogonal array is constructed for the controllable factors of data period, horizon length, and number of observations required. An experimental design is then performed to establish the appropriate levels for each factor. At the same time, an L₄(2³) outer orthogonal array is used to consider the inherited parameters of forecasting method as the noise factors of Taguchi method simultaneously. An illustrated example, employing data from a power company, serves to demonstrate the thesis. The results show that the proposed model permits the construction of a highly efficient forecasting model through the suggested data collection method.     

Analysis of Antennas with PBG Substrate

The use of photonic materials has been used in the theory of optical waves. The PBG (Photonic Band Gap) theory and material, was developed recently for optical frequencies and can be easily applied to millimeter waves, microwaves and planar antenna frequencies. The presence of photonic materials as substrate in antennas has some good characteristics such as, supression of light spontaneous emission and suppression of surface waves, allowing the application in planar antenna array. In this work an elaborate analysis using the full wave Transverse Transmission Line - TTL method, that provides efficient and concise results is applied to the planar antennas array with PBG substrate.     

X波段双极化有源相控阵天线的设计

机载或星载X波段有源相控阵雷达系统具有很高的分辨率，由于雷达系统使用了大量双极化子阵组成的有源相控阵天线（俯仰面和方位面均需扫描），频率的升高使得子阵馈线网络的可用面积受到了很大的限制。本文着重论述了有源相控阵天线中的双极化阵设计，提出了一系列解决方法，进而叙述了整个天线阵的设计。     

利用垂直阵列构作Cartesian认证码

利用垂直阵列构作了一类Cartesian认证码,计算了它们的参数,并且在编码规则按等概率分布选取时,成功的模仿攻击和成功的替换攻击概率也被算出。     

高精度CCD尺寸自动检测系统的光学系统设计

介绍测量精度为±０．００３ｍｍ的ＣＣＤ尺寸检测系统的光学系统设计特点及远心物镜设计原理，并给出了测试结果。     

关于超立方体网络的容错路径选择

文章给出ｎ－维超立方体网络的容错路径选择算法，该算法具有自适应性，可以防止死锁和活锁现象的发生，应用该算法，可求出一条基于安全优先策略的可行最短路径。     

行为级DSP算法描述的阵列处理器综合方法研究

本文提出了针对递归DSP算法的高层次系统综合流程,并以脉动(systolic)式处理器阵列结构实现.从DSP算法的FDDL行为级描述开始,经由编译及划分,产生数据相关流图(Data Dependency Graph),然后实现对算法流图的空间映射及时域规划,得到算法的信号流图(Signal Flow Graph),经时序重构,生成脉动阵列,最后实现对处理器单元的数据路径综合及控制器综合,并对处理器单元定位,本文同时提出了各设计阶段的算法策略及优化策略,并给出综合结果。     

用于X光激光实验的反射式线聚焦光学系统的设计和分析

基于三维光线追迹的象差计算,对卢瑟福实验室用离轴球面反射线聚焦系统作了分析。然后,首次提出了用于X光激光实验的两类新的反射式线聚焦构型,即反射式光楔列阵和光锥列阵系统,并作了计算。最后,对所得结果作了比较和讨论。     

串联系统可靠性虚拟系统法置信下限的小样本性质

本文讨论了具有r个成败型元件串联系统可靠性的置信下限问题。研究了虚拟系统法置信下限的小样本性质,证明了,在通常情况下虚拟系统法置信下限要大于常见的L-M法置信下限.更一般地,本文证明了在成败型试验中,当成功数与试验数之比保持不变时,试验次数的增加将直接缩小成功率置信区间的长度。