激光二极管反馈干涉的实验观测

利用LabView软件虚拟示波器和信号源,观测了激光二极管反馈干涉实验现象．实验证明反馈回激光二极管的光的入射方向和入射光强以及信号处理电路的带宽,对反馈干涉信号有很大的影响．     

VLSI Implementation of Forward Error Control Technique for ATM Networks

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very‐large‐scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a 5 ° 5 matrix of data cells in a Virtex‐E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.     

A virtual boundary method with improved computational efficiency using a multi‐grid method

The flow around spherical, solid objects is considered. The boundary conditions on the solid boundaries have been applied by replacing the boundary with a surface force distribution on the surface, such that the required boundary conditions are satisfied. The velocity on the boundary is determined by extrapolation from the flow field. The source terms are determined iteratively, as part of the solution. They are then averaged and are smoothed out to nearby computational grid points. A multi‐grid scheme has been used to enhance the computational efficiency of the solution of the force equations. The method has been evaluated for flow around both moving and stationary spherical objects at very low and intermediate Reynolds numbers. The results shows a second order accuracy of the method both at creeping flow and at Re=100. The multi‐grid scheme is shown to enhance the convergence rate up to a factor 10 as compared to single grid approach. Copyright © 2004 John Wiley & Sons, Ltd.     

Parallel Algorithm for Unconstrained Optimization Based on Decomposition Techniques

We present a numerical implementation of the parallel gradient distribution (PGD) method for the solution of large-scale unconstrained optimization problems. The proposed parallel algorithm is characterized by a parallel phase which exploits the portions of the gradient of the objective function assigned to each processor; then, a coordination phase follows which, by a synchronous interaction scheme, optimizes over the partial results obtained by the parallel phase. The parallel and coordination phases are implemented using a quasi-Newton limited-memory BFGS approach. The computational experiments, carried out on a network of UNIX workstations by using the parallel software tool PVM, show that parallelization efficiency was problem dependent and ranged between 0.15 and 8.75. For the 150 problems solved by PGD on more than one processor, 85 cases had parallelization efficiency below 1, while 65 cases had a parallelization efficiency above 1.     

计算机辅助电子线路实验的思考与探索

本文介绍了EltctronicWorkbench软件和计算机虚拟仪器系统，采用计算机模拟仿真技术对电子线路实验加以辅助设计和探索。     

A virtual instrumentation based protocol for the automated implementation of the inner field compensation method

One influential parameter which mediates interactions between many types of molecules and biological membranes stems from the lumped contributions of the transmembrane potential, dipole potential and the difference in the surface potentials on both sides of a membrane. With relevance to cell physiology, such electrical features of a biomembrane are prone to undergoing changes as a result of interactions with the aqueous surrounding. Among the most useful tools devoted to exploring changes of electrical parameters of a lipid membrane induced by certain extracellular ions, lipid composition, and embedded membrane peptides and proteins, are spectroscopic imaging and the inner field compensation (IFC) method. In this work we layout the principles of a fully computerized version of the IFC method, which makes it more readily available to users. As a direct application, we deployed this improved version of the IFC method to time-resolve changes induced by alamethicin monomers upon membrane dipole potential, following their aggregation within an artificial lipid membrane. Intriguingly, even prior crossing the membrane core, the membrane-bound alamethicin monomers are shown to significantly increase the dipole potential of the monolayer they reside in. Such data further emphasize the yet less-explored interplay between membrane-based protein and peptides, and the membrane dipole potential.     

基于计算机声卡的虚拟仪器的设计

主要介绍通过计算机的声卡来实现对虚拟仪器的设计，模拟了示波器、信号发生器和频率计等设备的基本功能，详细介绍了系统的硬件设计方法及软件流程。该系统主要适用于音频范围的各种信号的采集与产生。     

关于超立方体网络的容错路径选择

文章给出ｎ－维超立方体网络的容错路径选择算法，该算法具有自适应性，可以防止死锁和活锁现象的发生，应用该算法，可求出一条基于安全优先策略的可行最短路径。     

串联系统可靠性虚拟系统法置信下限的小样本性质

本文讨论了具有r个成败型元件串联系统可靠性的置信下限问题。研究了虚拟系统法置信下限的小样本性质,证明了,在通常情况下虚拟系统法置信下限要大于常见的L-M法置信下限.更一般地,本文证明了在成败型试验中,当成功数与试验数之比保持不变时,试验次数的增加将直接缩小成功率置信区间的长度。     

自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。