基于可分组设计的部分重复码研究

针对最小带宽再生情形下的有效修复问题,提出了一种新型部分重复(FR,fractional repetition)码设计。该设计由外部最大距离可分(MDS,maximum distance separable)码和内部重复码组成,称为GDDBFR(group divisible design based FR)码,可以达到随机访问模式下的系统存储容量,并且能够在很大范围内选择构造参数。理论分析指出,尽管GDDBFR码采用基于表格的修复方式,但通常具有大量的节点修复选择方案。此外,实验结果表明,与传统的RS(Reed-Solomon)码和再生码相比,GDDBFR码可以显著地减少失效修复时间。     

基于多因子的机电设备测试性验证样本分配方案

针对目前机电设备测试性验证试验中,因样本分配不合理导致试验结论置信度低的问题,通过分析影响试验结论置信度的4个关键因素即故障模式数、故障率、故障扩散强度总和与危害度,提出了基于多因子的样本分配方案。方案依据多因子综合相对比值,得出各UUT所分配的样本量,达到优化样本结构,提高样本集代表性的目的。对单步故障扩散算法进行了改进,改进后的算法可以更有效地计算故障扩散强度,并以某机电设备稳定跟踪平台为例进行了样本分配,比较分析抽样结果证明,应用该方案得到的样本结构更加合理,可以使试验结论有较好的置信度。     

基于变量节点可靠度的洗牌置信传播算法

提出了一种新的低密度奇偶校验(Low-Density Parity-Check,LDPC)码串行译码策略.该方法基于原有的LDPC码串行译码策略,根据来自信道的初始消息的可靠度对变量节点或校验节点进行均匀分组.对所提方法的误码率与平均迭代次数进行了分析.仿真结果表明:该策略的性能比原来的LDPC码串行译码策略有很大提高.     

Alkane isomers: presence in petroleum ether and complexity

The presence and absence of alkane isomers in petroleum and petroleum derivatives depend on the complexity of these structures. It was assumed that the more complex the structure is the less probable it is that that the molecule can be detected in any petroleum derivative. Complexity is a vague concept, which has not been defined in quantitative terms yet, and therefore there is no experimental method, which could be used to determine ‘complexity’. Mass spectrometry and infrared spectroscopy in combination with gas chromatography were used to identify the various structural isomers of alkanes in petroleum ether. The isomers were categorised in quantitative terms by using topological indices and linear discriminant analysis. It was found that alkanes possessing a more complex, highly branched structure are less probable to be detected in petroleum ether than isomers with a simpler backbone structure. It was proposed that the experimental ‘measure’ of the complexity of isomer_i should be proportional to 1/C_i , where C_i , denotes the concentration of isomer_i in a (primary) petroleum derivative.     

Weight distributions of a class of cyclic codes with arbitrary number of nonzeros in quadratic case

Cyclic codes are an important class of linear codes, whose weight distribution have been extensively studied. So far, most of previous results obtained were for cyclic codes with no more than three nonzeros. Recently, the authors of [37] constructed a class of cyclic codes with arbitrary number of nonzeros, and computed the weight distribution for several cases. In this paper, we determine the weight distribution for a new family of such codes. This is achieved by introducing certain new methods, such as the theory of Jacobi sums over finite fields and subtle treatment of some complicated combinatorial identities.     

基于LabVIEW的砝码自动检定系统设计与实现

针对目前砝码检定工作操作过程复杂、检定效率低等问题,设计了一种基于LabVIEW的砝码自动检定系统。在符合砝码检定规程的情况下,系统实现了检定数据实时采集、数据处理、生成原始记录、管理标准器、查询历史数据和衡器控制等功能。相对现有的砝码检定方法有操作简单、高效、程序移植性好等优点。系统由主控计算机、串口转无线扩展卡、多台衡器设备及相应的标准砝码装置组成。通过使用串口转Wi-Fi模块,系统可实现控制多台衡器设备的需求。实验结果证明,系统运行稳定可靠,采集数据准确,容易扩展,且大幅度减轻了检定人员的劳动强度,在计量检定工作中具有一定的实用和推广价值。     

C语言在密立根实验数据处理中的应用

用密立根油滴仪测油滴的电荷,求基本电量,及验证电荷量子性的实验是大学物理实验的经典实验。实验采用倒过来验证法,数据多,计算量较大,本文探讨使用C语言编程来处理实验数据。