The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

X-ray emission for Ar11+ ions impacting on various targets in the collisions near the Bohr velocity

X-ray emission from the collisions of 3 MeV Ar¹¹⁺ ions with V, Fe, Co, Ni, Cu, and Zn is investigated. Both the x-rays of the target atom and projectile are observed simultaneously. The x-ray yield is extracted from the original count. The inner-shell ionization cross section is estimated by the binary encounter approximation model and compared with the experimental result. The remarkable result is that the Ar K-shell x-ray yield is diminished with the target atomic number increasing, which is completely opposite to the theoretical calculation. That is interpreted by the competitive consumption of the energy loss for the ionization of inner-shell electrons between the projectile and target atom.     

Recent advances of ultrasonic testing of cement based materials at early ages

To summarize some of the most important findings in the field of ultrasonic (US) testing of early age hydration and formation of structure of different cement based materials (CBMs), a review of literature with focus on US P-wave transmission and S-wave reflection methods is presented in this paper. The review shows a great ability of both US techniques to observe setting phenomena and to determine different milestones during the early age formation of CBM’s microstructure. Clear physical basis, high accuracy, and non-destructive nature of the method indicate that US methods could become standardized in the near future.     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.     

Investigation of the equality constraint effect on the reduction of the rotational ambiguity in three-component system using a novel grid search method

The obtained results by soft modeling multivariate curve resolution methods often are not unique and are questionable because of rotational ambiguity. It means a range of feasible solutions equally fit experimental data and fulfill the constraints. Regarding to chemometric literature, a survey of useful constraints for the reduction of the rotational ambiguity is a big challenge for chemometrician. It is worth to study the effects of applying constraints on the reduction of rotational ambiguity, since it can help us to choose the useful constraints in order to impose in multivariate curve resolution methods for analyzing data sets. In this work, we have investigated the effect of equality constraint on decreasing of the rotational ambiguity. For calculation of all feasible solutions corresponding with known spectrum, a novel systematic grid search method based on Species-based Particle Swarm Optimization is proposed in a three-component system.     

Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

Variations of the elastic constants of InSb near the covalent-metallic transition

Abstract

The pulse-echo-overlap method was used to measure the longitudinal and transverse wave velocities in single-crystal (100) and (111) samples of InSb up to 3 GPa at room temperature. The peculiar variations of the elastic constants were observed near the covalent-metallic transition.     

Flocking and asymptotic velocity of the Cucker–Smale model with processing delay

The processing delay is incorporated into the influence function of the well-known Cucker–Smale model for self-organized systems with multiple agents. Both symmetric and non-symmetric pairwise influence functions are considered, and a Lyapunov functional approach is developed to establish the existence of flocking solutions for the proposed delayed Cucker–Smale model. An analytic formula is given to calculate the asymptotic flocking velocity in terms of model parameters and the variation of the position during the initial time interval.     

Método de elementos de borde jerárquico basado en el árbol de Barnes-Hut aplicado a flujo reptante exterior

In this work, a hierarchical variant of a boundary element method and its use in Stokes flow around three-dimensional rigid bodies in steady regime is presented. The proposal is based on the descending hierarchical low-order and self-adaptive algorithm of Barnes-Hut, and it is used in conjunction with an indirect boundary integral formulation of second class, whose source term is a function of the undisturbed velocity. The solution field is the double layer surface density, which is modified in order to complete the eigenvalue spectrum of the integral operator. In this way, the rigid modes are eliminated and both a non-zero force and a non-null torque on the body could be calculated. The elements are low order flat triangles, and an iterative solution by generalized minimal residual (GMRES) is used. Numerical examples include cases with analytical solutions, bodies with edges and vertices, or with intricate shapes. The main advantage of the presented technique is the possibility of considering a greater number of degrees of freedom regarding traditional collocation methods, due to the decreased demand of main memory and the reduction in the computation times.