一种测定反应体系压力变化的无汞反应动力学装置

测量反应体系压力变化的装置已有报道,但本文装置具有操作方便、记数准确等优点。 1 实 验 1.1 实验原理及试剂 详见文献。 1.2 装置及仪器 本文的无汞动力学测量装置用于乙炔氢氯化均相催化反应力学研究,其组装图如图1所示。     

Gas chromatographic conditions for the linearity of the relationship between σT,t and tR in open tubes

The linearity of the relationship between σ_T,t² and (1 + k)² is studied with the view of using it for the evaluation of GC equipment. Based on appropriate analytical expressions it is concluded that in general this relationship is not linear and that practical procedures for column evaluation should be developed that take this non-linearity into account.     

All-glass open-split interface for capillary GC/MS

This paper describes a design for an all-glass GC/MS interface. The design has advantages due to low dead volume, lack of column effluent adsorption and degradation, simple interface production and installation, and ease of column mounting/dismounting.     

Non-destructive in situ determination of pigments in 15th century wall paintings by Raman microscopy

Raman microscopy has been applied to the study of 15th century wall paintings in a chapel of St. Orso Priory palace (Aosta, Italy) in view of their restoration. The use of a transportable instrument has made it possible to work non-destructively in situ without sampling. The main inorganic pigments used by the unknown artist, namely mercury sulphide, azurite, white lead, red and yellow ochre, carbon black and lead tin yellow type I have been identified, and the presence of organic substances and of some decay products (calcium sulphate and oxalate) has been observed.     

Diffusion-averaged molecular weights of «nonboiling» crude oil fractions

Summary The successful application of the formerly presented concept of diffusion-averaged molecular weight, M_d, to vacuum residues of crude oils, or their fractions, is described. The samples for establishing the calibration curve, logDvs. logM, were crude oil fractions with polydispersities smaller than 1.1. In a surprisingly good approximation the calibration curve is independent of the origin of these fractions if 500<M<10000. The validity of our calibration curve was demonstrated with more than 10 crude oil residues and with some of their hydrogenation residues [2].     

电子对抗装备战术指标体系构建方法

考虑电子对抗的作战特点，遵循体系构建原则，依据作战目标特性，以作战规模为依据，把电子对抗装备战术指标划分为战略、战役、战术三个层次，并把作战规模作为一级指标的划分依据，选择作战用途和装备指标性质作为二级指标的划分依据，装备的具体作战能力和环境适应能力作为三级以下指标划分依据。     

激光加工设备的通讯技术分析

通讯技术实际上是设备与设备之间的互通互联.随着信息化的发展,利用高科技产物--以激光为能源的设备已经产生并逐渐成熟.传统的激光设备通讯方式主要采用并行接口,而随着技术的增强,新的通讯技术得到了广泛应用.本文结合激光设备的特点,对几种常见通讯接口技术加以阐述.     

无人机机载测控设备统一帧结构研究

提出了飞控计算机与测控系统之间接口的统一帧结构设计新的方法和思路,初步建立了完备的格式化通信信息集。对帧结构进行动态配置,使帧结构具有通用化功能和可操作性。探讨了帧结构校验方法,使之具有检/纠错功能。理论分析表明,新的统一帧结构设计能够有效提高无人机测控系统机载设备的通用化。     

基于JC-5600ATE的单/双电源运算放大器测试方法

集成运算放大器具有成本低、功能多等优点,可广泛用于自动控制系统、测量仪表等其他电子设备中。近年来集成运放的指标在不断提高,性能也在不断提升,伴随着运算放大器的发展,对用来考核运算放大器指标的测试技术也提出了相应的要求,对测试系统(Automatic Testing Equipment,以下简称ATE)的性能要求也相应变高。阐述了单、双电源集成运算放大器在JC-5600ATE上的测试方法,并分析了两者的测试差异。     

A simple polymer electrolyte membrane system for enrichment of low-level tritium (3H) in environmental water samples

Tritium (³H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of ³H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich ³H in 250–3000?mL environmental water samples to a 10-mL final volume. The IAEA PEM-³H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional ³H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show ³H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ～4.5?%. Further work is needed to quantify inter-sample memory and to establish lower ³H detection limits. The IAEA PEM-³H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.