基于LabVIEW的光纤水听器闭环工作点控制系统

介绍了一种基于LabVIEW的干涉型光纤水听器闭环工作点控制系统.该系统通过调节光源频率,利用非平衡干涉仪两臂的光程差产生补偿相位,实现了工作点的控制,从而避免了在干涉仪中引入压电陶瓷(PZT),提高了系统的稳定性与可靠性.同时,对传统的信号解调算法进行了改进,提高了解调精度和动态范围.利用该系统对某一干涉型光纤水听器的声压相位灵敏度进行了测量.在频带102～2×103 Hz上,平均灵敏度为-162 dB,频响波动＜±1.0 dB,与采用相位载波(PGC)调制解调方法测量的结果基本一致,验证了该系统的可行性.     

基于Massive MIMO及频谱叠加的5G SA网络上行优化方法

大规模多输入多输出(Multiple-Input Multiple-Output, MIMO)可以有效提升5G SA网络的上行链路数据传输速率以及可靠性。针对5G SA网络上行链路速率和覆盖不均衡的情况,提出了基于大规模MIMO的分组算法,将发送信号矢量进行分组,组内采用最大似然检测,组外采用基于正交三角分解(QR分解)的干扰消除检测,并且结合5G频谱的叠加策略,在降低算法复杂度的同时,有效提升网络覆盖和速率。通过5G SA现网实测,通过MIMO降低分组数量能够提升分组检测性能,结合上行低频段频谱叠加策略能够有效提升5G SA网络上行覆盖30%,提升5G SA网络上行平均速率40%～80%,特别是弱覆盖边缘的网络速率,最高可达600%。     

一种基于深度可分离卷积的轻量级人体关键点检测算法

针对网络模型执行过程耗时过长的问题,受到像素切割网络架构中的编解码结构启发,设计了一种高效的轻量级主干网络,使用深度可分离卷积作为基本的卷积模块,利用了多维自学习模块(Multidimensional Self-Learning Module, MSLM)对特征矩阵进行自适应的学习来增强有用信息权重,同时使用编解码结构对其主干结构进行效率上的优化,设计出了深度可分离网络(Codec Depth Separable Network, CSDNet),相比于MobileNet性能提升了72%,精度提升了5.2%。     

GB 18655—2002中车载零部件发射测量骚扰限值的选择方法

通过实际的两个测试案例,分析讨论了在运用GB18655—2002对车载零部件进行发射测试时,选用适当的骚扰限值的方法。认为以标准中的辐射/传导骚扰的符合性判断流程图为主,宽带骚扰举例及窄带骚扰源的定义为辅,综合考虑,才能选择出适当的骚扰限值,得到正确的测试结果。     

二极管阵列检测-流动注射分光光度法同时测定食品中铁铜钴

目的在于建立同时测定食品中铁、铜、钴三种微量元素的新方法。以2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)为显色剂,Triton X-100为增敏剂,采用流动注射-CCD二极管阵列检测-分光光度分析法同时对其进行测定。优化了实验参数,并用偏最小二乘法计算程序解析重叠光谱。结果显示,铁、铜和钴的线性范围分别为0.2～10 μg·mL-1,0.1～5.0 μg·mL-1,0.01～1.0 μg·mL-1,检出限分别为：0.2,0.1,0.01 μg·mL-1,进样频率为45样·h-1。所建方法用于茶叶、芝麻、小米等食品测定时,样品加标回收率分别为铁89.4%～102.3%、铜92.2%～108.0%、钴93.2%～110.8%,相对标准偏差为1.1%～12.1%。对国家一级标准参考物质茶叶和桃叶进行测定(ｎ＝8),结果在其给出的保证值范围之内。     

苯快速反应点火特性的光谱研究

利用由单色谱仪、压力传感器以及示波器组成的测试系统, 测定了高温激波管中苯快速反应的几个重要产物：H,C₂和CH的点火延迟时间和出现的顺序。提出了一种在入射激波条件下确定含能材料冲击点火延迟时间的新方法,并介绍了苯在快速反应中碳生成的微观反应机理。 研究表明: 无论马赫数如何改变,H原子总是最先出现,说明苯在快速反应过程中,首先断裂的C—H键,而不是C—C键。利用较早出现的反应中间产物H原子来测定苯的点火延迟时间更为准确。利用单色谱仪技术能较好地研究苯的快速反应点火特性,新方法与国内外常用的全色光技术相比可明显减少实验量。     

Radiophotolumenescence of Irradiated Polymethylmethacrylate Doped with Some Charge Transfer Complexes

Radiophotolumenescence (RPL) of irradiated and non irradiated thin films of polymethylmethacrylate (PMMA) doped with anthracene (Anth) as a donor, and tetracyanoquinodimethane (TCNQ) as an acceptor, has been investigated. The RPL – glow spectrum was recorded to study the characterizing emission bands from the point of view of glow peak position and intensity and hence the prospective relative sensitivities. RFL – signal fading after one month storage in dark at room temperature post gamma irradiation was also studied. PMMA doped with 6:4 donor to acceptor ratio has been proved to be the most sensitive one with less fading regarding gamma detection. On the other hand 2 Anth: 8 TCNQ was found to be the proper dopant concentration ratio for thermal neutron detection.     

Comparative Liquid Chromatographic Studies for the Determination of Bioactive Peptides

Reliable and sensitive chromatographic methods have been developed and applied to determine derivatized di- and tripeptides: aspartame, carnosine, glutathione, alanyl-glutamine, and γ-glutamyl-cysteine. Photodiode-array detection was used for dansyl-chloride derivatives, while fluorescent detection was carried out for orthophthaldialdehyde derivatized peptides to obtain higher sensitivity. The sensitivity and detection limits were determined and compared in order to select the most efficient analytical method. Transition metal complexes [zinc(II), cadmium(II), silver(I), and copper(II)] with cysteine containing peptides were also determined with ultraviolet-visible detection. The structural identification was carried out by the analysis of the mass-spectra recorded with an atmospheric pressure chemical ionization method in separate chromatographic experiments.     

一种可视化检测肼的苯并噁唑类荧光增强型探针

以苯并噁唑为荧光基团，合成和表征了一种用于可视化检测N₂H₄的荧光增强型探针(HL2)，并研究了其光谱性质。实验结果表明，HL2对N₂H₄具有高的选择性和灵敏度，抗干扰能力强，响应快，它对N₂H₄的检测限为0.072 μmol·L^-1。此外，HL2可应用于实际水体样品中N₂H₄的检测，并且还能实现HeLa细胞中N₂H₄的荧光成像。     

Skin layer detection of optical coherence tomography images

In this paper, we present an image processing algorithm to automatically and more precisely detect the boundary between the main skin layers: stratum corneum, epidermis, and dermis. The aim of the proposed skin layer detection algorithm is to assist the dermatologists to measure the epidermal thickness (ET) for skin diseases diagnosis and also to assist pharmacologists so that they can make a better decision for prescribing according to the advancement of the skin disorders characterized with ET change.