An energy‐efficient asynchronous wake‐up scheme for underwater acoustic sensor networks

In addition to the requirements of the terrestrial sensor network where performance metrics such as throughput and packet delivery delay are often emphasized, energy efficiency becomes an even more significant and challenging issue in underwater acoustic sensor networks, especially when long‐term deployment is required. In this paper, we tackle the problem of energy conservation in underwater acoustic sensor networks for long‐term marine monitoring applications. We propose an asynchronous wake‐up scheme based on combinatorial designs to minimize the working duty cycle of sensor nodes. We prove that network connectivity can be properly maintained using such a design even with a reduced duty cycle. We study the utilization ratio of the sink node and the scalability of the network using multiple sink nodes. Simulation results show that the proposed asynchronous wake‐up scheme can effectively reduce the energy consumption for idle listening and can outperform other cyclic difference set‐based wake‐up schemes. More significantly, high performance is achieved without sacrificing network connectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Coverage‐aware connectivity‐constrained unattended sensor deployment in underwater acoustic sensor networks

Careful deployment of nodes in underwater acoustic sensor networks in a distributed manner with the goal of maximized coverage and guaranteed connectivity is a challenging problem because it is very difficult and costly to access the 3D underwater environment. This paper presents a novel algorithm for self‐deployment of nodes in underwater acoustic sensor networks assuming that the nodes are randomly dropped to the water surface and form a densely populated connected network at the water surface. The idea of the algorithm is based on calculating an optimized depth for each node in the network in such a way that the possible sensing coverage overlaps are minimized and the connectivity of final topology is guaranteed. The algorithm has three main phases. In the first phase, nodes are organized in a tree structure that is rooted at the surface station. In the second phase, the depths for all nodes are computed iteratively at surface station. In the final phase, the calculated depths are distributed to nodes so that the nodes start sinking. The performance of the proposed approach is validated through simulation. We observed that the proposed approach performs at least 10% better in terms of network coverage than contemporary schemes in the literature. Copyright © 2016 John Wiley & Sons, Ltd.     

PCB用高频（毫米波）材料与技术概述

文章概述了商用毫米波PCB材料的选择与技术。目前,商用微波设计走向毫米波体系并强烈要求薄型、高性能的基板材料。     

聚酯及其在FPC中的应用研究进展

本文概述了聚酯的结构,分别介绍了饱和聚酯和不饱和聚酯两大类聚酯,详细阐述了聚酯的各种性能,重点综述聚酯薄膜、聚酯胶粘剂和聚酯纤维在电子中的应用和最新研究进展。     

三层材料微悬臂梁模型及其在红外焦平面像元设计中的应用

双材料梁因其良好的热机械特性作为敏感部件被广泛用于热能传感器中.采用微电子工艺实现的双材料梁通常由金属和非金属作为主要功能材料构成,若两层材料之间粘附性差,则需加入一层粘附材料.根据材料力学热应力和弯拉组合理论,建立了用于分析具有中间粘附层的复合双材料(即三层材料)微悬臂梁的关于材料物理参数、结构尺寸与梁受热弯曲产生转角关系模型;利用此模型和工艺中常用材料,研究了三层材料微悬臂梁的材料选取、各层材料厚度匹配等优化设计问题.通过对像元仿真和对硅工艺制造的红外焦平面阵列(IRFPA)芯片进行测试,验证了模型的正确、合理和适用性.     

Underwater image restoration by means of blind deconvolution approach

Although the use of blind deconvolution of image restoration is a widely known concept, little literatures have discussed in detail its application in the problem of restoration of underwater range-gated laser images. With the knowledge of the point spread function (PSF) and modulation transfer function (MTF) of water,underwater images can be better restored or enhanced. We first review image degradation process and Wells' small angle approximation theory, and then provide an image enhancement method for our underwater laser imaging system by blind deconvolution method based on small angle approximation. We also introduce a modified normalized mean square error (NMSE) method to validate the convergence of the blind deconvolution algorithm which is applied in our approach. The results of different initial guess of blind deconvolution are compared and discussed. Moreover, restoration results are obtained and discussed by intentionally changing the MTF parameters and using non-model-based PSF as the initial guess.     

激光水下距离选通成像门控实验研究

激光水下距离选通成像系统要想获得有效的目标图像,必须精确地给出合适的触发信号和控制接收器ICCD的门控延迟时间和选通门宽等门控参数。针对这一关键问题,设计了不存在成像距离盲区的激光器电源提供源触发信号的外触发方式,并应用二分查找的方法确定成像系统的门控参数,利用实验确定的门控参数,获得了5至23m水下不同深度的有效目标激光图像48张。获取的水下激光目标图像的信噪比可达10dB以上,可满足目标探测的实际应用要求。     

水中空气隔层衰减冲击波性能研究

 根据鱼雷对舰船毁伤的特点,建立了多介质水下爆炸数值模型,提出了交界面处理及广义光滑长度计算方法,编制了多介质水下爆炸计算程序,并对水下爆炸空气隔层衰减冲击波的性能进行了定量分析。结果表明：无论是接触爆炸还是非接触爆炸,空气隔层均可有效衰减冲击波,并且接触爆炸中空气隔层衰减冲击波的效果更好,最大可使冲击压力峰值降低约55%;空气隔层厚度与爆炸厚度之比为1时便可达到较好的衰减冲击波效果,继续增加空气隔层厚度对衰减冲击波效果影响不大。研究结果可为舰船结构防护及防雷舱的结构设计提供参考。     

紫外光固化阳离子复合胶粘剂的制备与表征

 以三芳基六氟磷酸硫鎓盐为引发剂,钛酸四异丙酯(TIP)为无机前驱体,3,4-环氧环己基甲基3,4-环氧环己基甲酸酯为单体,制备了含TiO2纳米结构的紫外光固化阳离子复合胶粘剂。通过原子力显微镜对复合胶粘剂形貌进行表征,研究了TIP含量对胶粘剂折射率和光透过率的影响。结果表明：TiO2无机相均匀地分散在胶粘剂的聚合物基体中,平均粒径约为20 nm;随着体系中TIP质量分数的变化,复合胶粘剂折射率为1.510 3~1.540 9可调;胶粘剂的光透过率随TIP质量分数增加略有减低,但当TIP含量高达40%时,光透过率维持在90%左右。     

缩水甘油胺型聚氨酯胶粘剂的性能研究北大核心CSCD

采用商品化SKE-1型环氧树脂对自制聚氨酯预聚体(NCOPU)进行封端,制备了缩水甘油胺型聚氨酯(GAPU),并用傅里叶-红外光谱(FT-IR)对其结构进行表征,用在线FT-IR监控间苯二甲胺固化GAPU过程,用差示量热扫描(DSC)研究其相分离,用扫描电镜(SEM)观察固化物的表面微观形貌,用热重(TG)分析固化物的热力学稳定性。探讨了聚丙二醇(PPG)分子量的大小、不同质量分数的SKE-1对NCOPU封端及不同种类的固化剂对GAPU固化物力学性能的影响。研究表明:在60℃时用间苯二甲胺固化GAPU,2h即可固化完全,固化物热稳定性能良好,其外推起始分解温度为248.3℃,5%的分解温度为282.6℃。GAPU固化物的力学性能随着GAPU的环氧值减小而减小,在室温以上力学性能下降,在-196℃力学性能增加,其环氧值为0.153,在-196℃的拉伸剪切强度最佳,为16.11MPa。