用红外热象技术研究有凸台热源倾斜板的散热

本文介绍红外热象技术在工程热物理研究中某些应用的探索。作为实例，通过热象技术，实验研究了具有水平凸台离散热源的倾斜板的散热，在研究它的自然对流换热部份结合利用激光全息干涉技术。此间着重于分析倾斜角对散热的影响。     

Chalcogenide based all-solid-state thin electroplated ion-selective membrane for Hg(II) flow-injection determinations

The response to Hg(II) of a thin all-solid-state Te-doped silver chalcogenide membrane, described by the general formula Ag₂ + δSe_{1 − x}Te_x, which has been electrochemically prepared following a previously proposed approach, has been investigated. The kinetics of formation of the membrane's secondary dynamic response to Hg(II) has been successfully combined with the precise timing and transient signal, typical for flow-injection (FI) measurements, in developing a sensitive and reliable mercury FI detector. Under optimized stream conditions it exhibits a linear Nernstian response, with a double slope of the calibration graph of 59 mV dec⁻¹, over the mercury(II) concentration range 10⁻⁶ − 10⁻³ M, the typical sample throughput amounting to about 70 samples per hour. The observed chemical amplification of the signal is due to the specificity of the processes dominating the initial step in formation of the steady-state signal of the membrane to mercury. The analytical performance of the Hg(II) FI detector, as regards sensitivity, reproducibility, selectivity and long-term stability has been thoroughly investigated. The exact procedure for membrane electrodeposition is given and the potential of the proposed approach as a cost-effective way for preparing chalcogenides of unique structure and properties has been outlined in the above context.     

热释电红外摄像机斩波调制电路的设计

本文提出了热释电红外摄像机斩波调制的电路模型，并对此电路模型进行了具体的电路设计和分析。     

激光在材料中感生的瞬态光声波和光热波

研究了锁模激光在材料中产生频率达GHz的光声波和相应探测技术,用回波分析法无损坏测量了薄材料的厚度。研究了激光在材料中感生的光热波,热沉测量可用于解释材料的破坏机理。     

Long-wavelength GaInAsSb/AlGaAsSb DFB lasers emitting near 2.6 μm

We have successfully fabricated and characterized room temperature continuous wave (cw) GaInAsSb/AlGaAsSb distributed feedback lasers emitting in the wavelength region between 2.499 and 2.573 μm. To the best of our knowledge, this is the longest emission wavelength realized with a GaSb-based DFB laser diode. The laser structure used for DFB processing was grown by solid source molecular beam epitaxy. A DFB concept requiring no subsequent overgrowth step was used by defining first-order Cr-Bragg gratings laterally patterned to a ridge waveguide. Threshold currents smaller than 60 mA and room temperature cw output powers up to 6.5 mW were obtained. The laser diodes show single mode emission with side mode suppression ratios (SMSR) of up to 32 dB.     

调幅系数为任意值的调幅波研究

本文讨论了调幅系数为任意值的调幅波，给出了它的表达式，频谱与调幅系数，调制效率和信噪比增益的计算公式。     

Tesla变压器型电子束加速器初步实验

 介绍了一种Tesla变压器型的强流电子束加速器。当变压器初级输入20kV左右的电压时，加速器二极管输出电压500kV，电流9kA，信号脉宽大约50ns，该装置具有结构简单，安装方便，运行可靠等特点。     

二维光电位置敏感器件的非线性修正

根据二维光电位置敏感器件 (PSD)的工作原理 ,分析了影响PSD线性度的主要因素 ,提出了一种用神经网络对PSD进行非线性修正的方法。以PSD的输入输出数据对作为样本训练的神经网络 ,利用神经网络所具有地能够以任意精度逼近非线性函数的能力 ,实现PSD的输出与实际光点位置之间的映射 ,在神经网络的输出端得到线性响应。该方法的优点是不需要很大的数据存储量即可得到很好的修正效果。结果表明 ,修正后的PSD能在较宽的位置范围内输出高线性度的信号     

Establishment of Illuminance Scale at UME with an Accurately Calibrated Radiometer

Traceability in illuminance measurements at the National Metrology Institute of Turkey (TüBITAK-UME) was established in 2003 with a detector-based realization. The new measurement technique was developed for the determination of illuminance responsivity and upgrating of the illuminance scale. The unit of the illuminance responsivity, in A/lx, was measured with an expanded uncertainty of 0.2% (k = 2) by supplying using the developed scanning technique for the calculation of color correction factor. The surface of a radiometer was scanned using a double-monochromator facility upgraded with an x-y scanning system. The illuminance responsivity as a function of bandpass and temperature were also investigated in this study. To use a radiometer in the photometric applications of metrology, a light-sensitive device, a so-called trap detector, was characterized by measuring the absolute responsivity, the non-linearity, and spatial non-uniformity.     

Investigation of chemical decomposition of CCl4 on TiO2 near room temperature

Dissociative adsorption of CCl₄ on TiO₂ at 35 °C has been studied by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electron spin resonance. CCl₄ decompose to form CO, CO₂, and CO₃ on the surface, at such a low temperature, in which CO₂ formation is not from CO oxidation on TiO₂, but CO₃ can be produced by CO and CO₂ adsorption. The Cl generated from CCl₄ decomposition is left on the surface and bonded to titanium ions. Mineralization of CCl₄ on TiO₂ involves the lattice oxygens. Thermodynamical driving force and possible reaction routes for CO and CO₂ formation in the CCl₄ decomposition on TiO₂ are discussed.