基于分段电容阵列的改进型逐次逼近型ADC

为缩短高速模数转换器(ADC)中高位(MSB)电容建立时间以及减小功耗,提出了一种基于分段式电容阵列的改进型逐次逼近型(SAR)ADC结构,通过翻转小电容阵列代替翻转大电容阵列以产生高位数字码,并利用180 nm CMOS工艺实现和验证了此ADC结构。该结构一方面可以缩短产生高位数码字过程中的转换时间,提高量化速度;另一方面其可以延长大电容的稳定时间,减小参考电压的负载。通过缩小比较器输入对管的面积以减小寄生电容带来的误差,提升高位数字码的准确度。同时,利用一次性校准技术减小比较器的失配电压。最终,采用180 nm CMOS工艺实现该10 bit SAR ADC,以验证该改进型结构。结果表明,在1.8 V电源电压、780μW功耗、有电路噪声和电容失配情况下,该改进型SAR ADC得到了58.0 dB的信噪失真比(SNDR)。     

“高电压工程”课程思政教改探索与实践

针对“高电压工程”课程思政教学改革的要求,分别从教学目标、教学内容、教学方法和考核手段四个方面,挖掘课程中蕴含的思政元素,通过教学创新,有机融入思政内容,使学生不仅学到专业知识,更体会到专业内容蕴含的社会主义核心价值观。最后,通过课堂教学对“高电压工程”课程思政的改革效果进行了实践和检验,为其他电气类专业课的课程思政教学改革提供参考。     

透明吸波体综述北大核心CSCD

吸波体是一种带有损耗特性的周期结构,能够吸收电磁波,将电磁能转化为热能,降低反射的电磁波能量。随着应用场景的特殊化,吸波体朝着特殊领域、特定功能、更具针对性的方向发展。由于各类含有光学窗口的应用环境对抗电磁干扰需求的不断提高,吸波体光学透明化成为研究的重点方向。为了对透明吸波体的发展状况有系统的认识,文章以制造材料为脉络梳理了近年来可见光透明吸波体的研究现状,包括氧化铟锡(ITO)、金属网栅、石墨烯等,综述了以它们为材料制备的透明吸波体优缺点以及发展趋势,最后对透明吸波体的未来发展进行了展望。     

Fault detection of energy-aware grid systems in big data environment

Grid technology based on parallel theory is used to study a large amount of data processing. This research mainly discusses the fault detection of grid dynamic system in a big data environment. In order to verify the communication efficiency between different security nodes of the ZSS system under different operating system conditions, this study will use four physical computers and VM Ware software to establish a simulated communication environment, using GlobusToolkit (GT)'s existing deployment mechanism to realize the overall grid dynamic deployment architecture. Using Web service technology remotely calls the monitoring module interface of resource nodes in the domain and uses standard protocols to send monitoring data. At the same time, in order for the management node to save the monitoring data in the local standardized form of XML, the administrator can use the saved historical data to process system failures, analyze, and predict system performance. In order to solve the problem of information explosion, a fault detector is used to precisely control the cost of message detection and the state distribution of the detection result and the time of message delay. Under special circumstances, it takes 60 min to execute a 30-min job, and the fault detection point consumes an average of 54.33 min. The research results show that the fault-tolerant strategy can improve the performance of resource consumption in the fault-tolerant tracking system. Adopting the method of dynamically adjustable detection interval can effectively reduce the overhead of the grid dynamic system. The detection method used in this study can meet the application requirements of the grid.     

Analysis of grid file algorithms

Grid file algorithms were suggested in [12] to provide multi-key access to records in a dynamically growing file. We specify here two algorithms and derive the average sizes of the corresponding directories. We provide an asymptotic analysis. The growth of the indexes appears to be non-linear for uniform distributions:O(v ^c ) orO(v ), wherec=1+b^–1, =1+(s-1)/(sb+1),s is the number of attributes being used,v the file size, andb the page capacity of the system. Finally we give corresponding results for biased distributions and compare transient phases.     

Electrophoresis simulations using Chebyshev pseudo-spectral method on a moving mesh

We present the implementation and demonstration of the Chebyshev pseudo-spectral method coupled with an adaptive mesh method for performing fast and highly accurate electrophoresis simulations. The Chebyshev pseudo-spectral method offers higher numerical accuracy than all other finite difference methods and is applicable for simulating all electrophoresis techniques in channels with open or closed boundaries. To improve the computational efficiency, we use a novel moving mesh scheme that clusters the grid points in the regions with poor numerical resolution. We demonstrate the application of the Chebyshev pseudo-spectral method on a moving mesh for simulating nonlinear electrophoretic processes through examples of isotachophoresis (ITP), isoelectric focusing (IEF), and electromigration-dispersion in capillary zone electrophoresis (CZE) at current densities as high as 1000 A/m. We also show the efficacy of our moving mesh method over existing methods that cluster the grid points in the regions with large concentration gradients. We have integrated the adaptive Chebyshev pseudo-spectral method in the open-source SPYCE simulator and verified its implementation with other electrophoresis simulators.     

Study of reactive ion etching of Si and SiO2 for CFxCl4−x gases

A parametric study of the etching of Si and SiO₂ by reactive ion etching (RIE) was carried out to gain a better understanding of the etching mechanisms. The following fluorocarbons (FCs) were used in order to study the effect of the F-to-Cl atom ratio in the parent molecule to the plasma and the etching properties: CF₄, CF₃Cl, CF₂Cl₂, and CFCl₃ (FC-14, FC-13, FC-12, and FC-11 respectively). The Si etch rate uniformity across the wafer as a function of the temperature of the wafer and the Si load, the optical emission as a function of the temperature of the load, the etch rate of SiO₂ as a function of the sheath voltage, and the mass spectra for each of the FCs were measured. The temperature of the wafer and that of the surrounding Si load strongly influence the etch rate of Si, the uniformity of etching, and the optical emission of F, Cl, and CF₂. The activation energy for the etching reaction of Si during CF₄ RIE was measured. The etch rate of Si depends more strongly on the gas composition than on the sheath voltage; it seems to be dominated by ion-assisted chemical etching. The etching of photoresist shifted from chemical etching to ion-assisted chemical etching as a function of the F-to-Cl ratio and the sheath voltage. The etch rate of SiO₂ depended more strongly on the sheath voltage than on the F-to-Cl ratio.     

基于定向纳米碳管气体放电的气敏传感器研究

介绍了一种基于定向纳米碳管的气敏传感器,以生长定向纳米碳管的氧化铝模板作为阳极,铝板作为阴极,利用纳米碳管的尖端发射效应,在较低的电压下使气体产生放电现象。通过对纳米碳管在气体中击穿电压和放电电流的测量,实现对气体的定性定量检测。同时纳米碳管气敏传感器还具有体积小、灵敏度高、稳定性好、响应速度快、在常温常压下即可进行检测等优点,具有较好的应用前景。     

Surface analysis of plasma‐treated polydimethylsiloxane by x‐ray photoelectron spectroscopy and surface voltage decay

Surface states of polydimethylsiloxane (PDMS) treated by plasma were investigated by x‐ray photoelectron spectroscopy and surface voltage decay. X‐ray photoelectron spectroscopy confirmed the formation of a silica‐like (SiO_x, x = 3–4) oxidative surface layer. This layer increased in thickness with increasing exposure duration of plasma. Plasma exposure lowers the surface resistivity from 1.78 × 10¹⁴ to 1.09 × 10¹³ Ω □^?1 with increasing plasma treatment time. By measuring the decay time constant of surface voltage, the calculated surface resistivity was compared with the value measured directly by a voltage–current method; good agreement between the two methods was obtained. It was observed that plasma treatment led to a decrease in the thermal activation energy of the surface conduction from 31.0 kJ mol^?1 for an untreated specimen to 21.8 kJ mol^?1 for a plasma‐treated specimen for 1 h. Our results allow the examination of effects of plasma on the electrical properties of PDMS. Copyright © 2003 John Wiley & Sons, Ltd.     

Homo- and heterometallic [2x2] grid arrays containing RuII, OsII, and FeII subunits and their mononuclear RuII and OsII precursors: synthesis, absorption spectra, redox behavior, and luminescence properties

The absorption spectra, redox behavior, and luminescence properties (both at 77 K in rigid matrices and at room temperature in fluid solution) of a series of [2x2] molecular grids have been investigated. The latter were prepared either by means of sequential self-assembly, or by a stepwise protection/deprotection procedure, and are based on a ditopic hexadentate ligand 1 in which two terpyridine-like binding sites are fused together in a linear arrangement. The molecular grids studied include the homometallic species [[Fe(1)](4)](8+) (Fe(2)Fe(2)), and the heterometallic species [[Ru(1)](2)[Fe(1)](2)](8+) (Ru(2)Fe(2)) and [[Os(1)](2)[Fe(1)](2)](8+) (Os(2)Fe(2)). For comparison purposes, the properties of the mononuclear complexes [Ru(1)(2)](2+) (1-Ru) and [Os(1)(2)](2+) (1-Os) have been studied. All these compounds exhibit very intense absorption bands in the UV region (epsilon in the 10(5)-10(6) M(-1) cm(-1) range, attributed to spin-allowed ligand-centered (LC) transitions), as well as intense metal-to-ligand charge-transfer (MLCT) transitions (epsilon in the 10(4)-10(5) M(-1) cm(-1) range) that extend to the entire visible region. The mononuclear species 1-Ru and 1-Os exhibit relatively intense luminescence, both in acetonitrile at room temperature (tau=59 and 18 ns, respectively) and in butyronitrile rigid matrices at 77 K. In contrast, the tetranuclear molecular grids do not exhibit any luminescence, either at room temperature or at 77 K. This is attributed to fast intercomponent energy transfer from the Ru- or Os-based subunits to the low-lying metal-centered (MC) levels involving the Fe(II) centers, which leads to fast radiationless decay. The redox behavior of the compounds is characterized by several metal-centered oxidation and ligand-centered reduction processes, most of them reversible in nature (as many as twelve for Fe(2)Fe(2)). Detailed assignment of each redox process has been made, and it is apparent that these systems can be viewed as multilevel molecular electronic species capable of reversibly exchanging a number of electrons at accessible and predetermined potentials. Furthermore, it is shown that the electronic interaction between specific subunits depends on their location in the structure and on the oxidation states of the other components.