热处理及与KOH共炭化对深度脱除煤中无机矿物质的促进作用

研究了煤经热处理（炭化）以及煤与ＫＯＨ共炭化对酸洗脱灰的影响。结果表明，煤经炭化再用盐酸洗涤，可以在缓和的条件下大幅度提高酸洗脱灰率；煤与ＫＯＨ共炭化后再酸洗，不仅对煤中的粘土、黄铁矿等无机矿物质有很好的效果，还特别适于脱除在一般情况下都难以除去的石英矿物。     

Note on the ab initio PUHF treatment of open-shell systems

Ab initio projected-unrestricted Hartree-Fock calculations have been carried out on a number of excited and ionic states of the water molecule. Results have been compared with large-scale CI calculations, with IVO calculations, and with those of Mrozek and Golebiewski obtained by the 2 × 2 rotation method applied to orbitals. It is concluded that the PUHF method may provide the most useful alternative to large-scale CI for calculating properties of open-shell systems. But it will not be generally useful for calculating spectral transition energies.     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

Effect of polarization on the electrode behavior and microstructure of (La,Sr)MnO<Subscript>3</Subscript> electrodes of solid oxide fuel cells

The electrode behavior and microstructure of freshly prepared (La_0.8Sr_0.2)_0.9MnO₃ (LSM) electrodes were investigated under various polarization conditions. The original, large agglomerates in freshly prepared LSM electrodes were broken down into sphere-shaped grains when exposed to cathodic or anodic current passage of 200 mA cm^–2 at 800 °C in air for 3 h. Microstructural changes under cathodic polarization could be related to the pronounced diffusion and migration of oxygen vacancies and Mn ions on the LSM surface and lattice expansion, while lattice shrinkage under oxidation conditions most likely contributes to the structural changes under anodic polarization. Such morphological changes were irreversible and were found to be beneficial to the performance of freshly prepared LSM electrodes. Freshly prepared LSM electrodes behaved very differently with respect to the cathodic and anodic current passage treatment.     

X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.     

REATMENT AND RESOURCE REUSE OF 1,2,4-ACID PRODUCING EFFLUENT WITH MACROPOROUS POLYMERIC ADSORBENT

1. INTRODUCTION 1,2,4-acid (1-Amino-2-naphthol-4-sulfonic acid) is among the most important naphthalene derivatives which are widely used as the intermediates of dyestuffs. In its production process, however, high strength wastewater streams are gene…     

综合治疗脑梗塞68例观察

脑梗塞是常见病，且大部分可引起偏瘫，失语，智能障碍等后遗症，严重影响病人的生存质量，广州市第六人民医院于１９９５年１月～１９９７年６月采用中西药物，传统治疗，功能障碍治疗，心理治疗，氦氖激光血管内照射，血液光量子疗法，高压氧等综合治疗脑梗塞６８例，总疗程３个月，结果，总有效率９４．１％，显效率６４．１％，明显高于单用药物治疗的显效率，说明综合治疗可提高疗效，减少后遗症及致残率，且病程越短，疗效越好     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.     

XPS characterization of wood chemical composition after heat‐treatment

XPS was used to characterize the chemical changes occurring after drying or applying a heat‐treatment to beech wood samples. Our results indicate that the surface of this air‐exposed material could be strongly affected either by the ambient atmosphere during storage or by the complex atmosphere in the oven during drying or heat‐treatment. However, the O/C ratio measured after removal of a thin slice of a few millimetres of an untreated sample is in reasonable agreement with that calculated from the well‐established chemical composition of beech. Through this methodology (equivalent to scraping for hard materials) it is expected to get a realistic characterization of the wood. The reliability and repeatability of the XPS measurements have been checked and the method applied to the study of the chemical changes of the beech samples subjected to heat‐treatment. Heating at 240 °C induces a significant decrease of the O/C ratio from 0.55 before to 0.44 after the treatment. Heat‐treatment induces also a decrease of the C₂ carbon contribution (carbon atom bound to a single non‐carbonyl oxygen) associated with an increase of the C₁ carbon contribution (carbon atoms bound only to carbon or hydrogen atoms), in agreement with chemical modifications reported previously in the literature. Thanks to the small analysed area of the equipment used in this study, different spots were analysed to demonstrate the presence or absence of a gradient of chemical composition due to thermal degradation or migration of extractives from within the wood structure to its surface. At the scale of our observations, the different wood samples investigated (dried or heat treated) appear to be homogeneous. Copyright © 2006 John Wiley & Sons, Ltd.