超声波宽频谱发射技术研究

为了有效地完成超声波局部放电检测装置的性能检测,研究了超声波宽频带发射技术及其装置。采用MATLAB仿真技术分别对单频和复频超声换能器的声场轴向声压分布、声轴截面声场分布、声场指向性特性及复频焦区频谱图等声场特性进行了仿真研究,并据此设计了一款复频超声宽频带发射装置。结果表明,复频超声宽频带发射器产生的两列声波可发生声散射效应,从而达到超声场频谱变宽的目的。     

基于有限元模型的超声切割刀优化设计

超声切割刀在材料加工领域中有广泛的应用前景,可用于切割各种复合材料等硬脆材料。该文利用ANSYS有限元分析软件建立超声切割刀的有限元模型,对其进行模态分析和谐响应分析。仿真结果显示,超声切割刀在40kHz频率附近存在轴向纵振模态,其振动节点位于安装环和压电陶瓷中心线上,符合设计要求。基于有限元模型研制超声波切割刀,通过阻抗分析仪与激光多谱勒测振仪对换能器的固有频率与响应进行测试,获得的超声切割刀阻抗曲线平滑,谐振频率为40.261kHz,设计误差为0.83%,最大振幅达到14.52μm,结果与有限元计算相互吻合。     

基于空间冲激响应的圆形换能器辐射声场研究

基于空间冲激响应的稳态声压场理论,从选取距离函数出发,建立了单阵元圆形平面换能器声场中任一场点处的基于傅里叶变换的冲激响应声场模型,该模型适用于声场中的任意位置。并运用Matlab仿真了换能器的轴向与径向声压分布,且在圆形换能器冲激响应的声压分布实验系统上进行验证,实验结果与仿真得到的声压场具有很好的一致性。实验验证表明,仿真结果可准确反映圆形换能器的空间辐射声场分布。该方法计算快捷,对于优化圆形换能器设计参数及提高超声成像检测分辨率有重要参考意义。     

基于模糊控制的电动汽车再生制动系统的研究

再生制动能够降低能源的消耗量和延长电动汽车的行驶里程。它广泛的受到诸多学者的关注。本文提出了一个新颖的再生制动控制系统。该系统基于无刷直流电机的控制特性和电动汽车刹车时的制动特性,直流无刷电机采用传统的PID控制,刹车力采用模糊逻辑控制,刹车力矩可以由PID控制器实时的控制。通过Matlab/Simulink软件,仿真分析了电池的充电状态、制动力和直流侧线电流。实验和仿真结果均证实了在具有良好的刹车性能的前提下,该方法可以实现良好的再生制动性能和延长电动汽车的行驶里程,在工程上更加易于实现也具有更好的鲁棒性和更高的效率。     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.     

Miscibility Studies of Dextran/Poly(vinyl pyrrolidone) Blend in Solution

The miscibility of dextran (Dex)/poly(vinyl pyrrolidone) (PVP) in solution has been investigated in different percentages of the blend components by employing viscosity, density, refractive index and ultrasonic velocity methods at 30 and 50°C, respectively. Ultrasonic velocity and adiabatic compressibility against blend compositions were plotted and found to be linear. The interaction parameters μ and α have been obtained by using the viscosity data. The results indicated that the Dex/PVP blends are miscible in the entire composition range and it was further confirmed by ultrasonic velocity, density, refractive index studies. In addition, the results revealed that the change in temperature has no significant effect on the miscibility of Dex/PVP polymer blend.     

Synthesis of Novel Organosilicon Compounds Possessing Fully Substituted Imidazole Nucleus Sonocatalyzed by Fe-Cu/ZSM-5 Bimetallic Oxides

An efficient four-component synthesis of 1,2,4,5-tetrasubstituted imidazoles is described by one-step condensation of an aldehyde, benzil, ammonium acetate, and primary aromatic amine with nanostructure Fe-Cu/ZSM-5 bimetallic oxides in water under ultrasonic irradiation. The short reaction time, good yields, environmental friendly procedure, mild reaction conditions, and convenient operation are important advantage of this protocol. The products generated during the study have been utilized as substrates for synthesis of organosilicon-containing imidazoles. Synthesis of tris(triorganosilyl)methylimidazole derivatives were carried out using organolithium reagent (Me₃Si)₃CLi, prepared via metalation of (Me₃Si)₃CH with methyllithium in tetrahydrofuran, in excellent yields.     

Sonochemical Formation of Iodohydrin and Epoxide from Cyclohexene

Ultrasonic irradiation substantially improves the reaction of cyclohexene with I₂ in aqueous dioxane in the presence of Cu(OAc)₂ · H₂O to generate the expected iodohydrin in high yield. The product undergoes cyclization to the epoxide by biphasic treatment with either Na₂CO₃ or KOH in a sonication‐sensitive step.     

最小二乘B样条函数在火箭发动机数据处理中的应用

在固体火箭发动机地面试验数据处理中,通过应用最小二乘三次B样条函数拟合的方法,进行野值辨识和修复。文中阐述了实际应用中的步骤及应注意的几点问题。为避免常规的控制序列中含有野值而影响数据辨识的问题,提出差别选取控制点循环过滤的方法,实现精度更高的野值辨识。进而采用门限判别方法,实现野值的修复。通过实测数据处理的应用表明,该算法对单个和成片野值的辨识度都很高,适用于火箭发动机地面试验数据处理。     

Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan

This study investigates the use of both amplitude and time-of-flight based pulsed ultrasonic polar scan (P-UPS) as a sophisticated non-destructive damage sensor for fiber reinforced composites. Focus is put on stiffness related damage phenomena, which are in general difficult to monitor nondestructively, and their associated signature in the P-UPS image. Various composite samples, with different damage states, have been inspected at multiple material spots with the P-UPS technique. The results demonstrate the capability of the P-UPS method to obtain a unique signature of the local material damage characteristics. Several indicators in the acquired P-UPS images have been identified from which the type and level of material degradation can be obtained. The P-UPS extracted characteristics are fully supported by simulations, conventional tests as well as visual inspection.