准分子激光泵浦的皮秒染料激光器

利用准分子激光泵浦猝灭式染料激光器，获得了３０ｐｓ的可调谐染料激光脉冲输出。     

人造参考星系统设计

简述了人造参考星系统，并用该系统作为大型望远镜主动光学和自适应光学的Ｓｈａｃｋ－Ｈａｒｔｍａｎ波面探测系统的光源。     

注入种子CuBr激光器中的光谱控制

报道了采用注入种子方法．对ＣｕＢｒ激光器进行激光模式控制的实验结果。实现了单纵模ＣｕＢｒ激光脉冲的注入放大，获得了功率为１００ｍＷ水平的窄线宽铜激光辐射．在理论上分析了短脉冲高增益激光器中注入种子过程，讨论了在注入种子ＣｕＢｒ激光器中进行光谱控制的实验结果．     

Analysis of Threshold Current and Wall-Plug Efficiency of Diode Lasers with Asymmetric Facet Reflectivity

Threshold current and differential quantum efficiency of broad contact lasers with asymmetric facet reflectivity are discussed with the purpose to reveal factors essential for optimisation of the wall-plug efficiency of such lasers. Lasers with low front facet reflectivity and short cavity often exhibit behaviour difficult to explain with a classical theory. More rigorous calculation performed in this work show that differential quantum efficiency is indeed less affected by a change of the front facet reflectivity or cavity length than predicted by such theory. These findings greatly simplify criteria for optimisation of the wall-plug efficiency of broad contact lasers with coated facets.     

Temperature Dependence of the Threshold Current and the Lasing Wavelength in 1.3-μm GalnNAs/GaAs Single Quantum Well Laser Diode

Temperature stability of the threshold current and the lasing wavelength is investigated in a 1.3-μm GaInNAs/ GaAs single quantum-well laser. The measured characteristic-temperature was 88 K. The small wavelength shift per change in temperature of 0.35 nm/°C was obtained, indicating the superior lasing-wavelength stability. Therefore, it is shown experimentally that GaInNAs is very promising material for the fabrication of light source with excellent high-temperature performance for optical fiber communications.     

氦－镉激光器的失效机制

本文报道国产氦－镉激光器常出现的导致失效的一些现象，并阐明其机制。同时给出一些改进意见及修理方法。     

自由电子激光光导效应数值研究

本文对喇曼型自由电子激光光导效应进行了理论研究和数值模拟。我们编写了轴对称的二维计算机程序(FELOG),用来研究无波导和有波导情况下的光导效应。对光场分布、光场半径、填充因子及等效折射率等进行了模拟。根据实验参数进行的模拟结果与实验结果进行比较,它们符合很好。并对影响光导效应的因素进行了分析。     

The role of OH ions in the stabilization of F colour centres in LiF

Thermally Stimulated Depolarisation Current (TSDC) and optical methods are applied to a range of alkali-fluoride crystals in order to establish a model for the stable F ₂ ⁺ - like colour centres in LiF:OH^-. The experimental results for LiF:OH^- suggest that the OH^- defects are partially destroyed under ionising irradiation or during crystal growth. The low-temperature dielectric relaxation signals in LiF:OH^- and LiF:Mg²⁺,OH^- are attributed to highly interacting hydroxide ions and products of their destruction located in extended lattice defects. In LiF:OH^-, in contrast to other alkali halides, the results advocate for a defect-structure model, which considers a neutral defect (ND, probably O₂ or H₂) sited at the anion vacancy of the O^2--V _a ⁺ dipole and which possibly is the “nucleus” for the F ₂ ⁺ centre. The proposed F ₂ ⁺ (ND, O^-) model seems to better explain the dielectric results, compared to the older F ₂ ⁺ (O^2-) and F ₂ ⁺ (O^-) models. The estimate for the electric dipole moment derived from the experimental TSDC bands, gives a value for the F ₂ ⁺ - like centre in LiF:OH^- between those of the F ₂ ⁺ (O^-) and F ₂ ⁺ (O^2-) defects, in good agreement with the proposed F ₂ ⁺ (ND,O^-) model. The reduction of the activation energy barrier of the (re)orientation process of the Mg²⁺V _c ^- (OH^-) complexes in LiF:Mg²⁺,OH^-, and the low-temperature shift of their TSDC band, compared to the single Mg ₂ ⁺ V _c ^- peak in LiF:Mg²⁺, are tentatively ascribed to an increase in the crystal-lattice parameters owing to the presence of OH^- and/or products of its destruction. Received 31 August 2001 / Received in final form 30 March 2002 Published online 9 July 2002     

The energy exchange and the optimum length of the sample tube of opfirl

The energy exchange between the pumping laser and FIR signal in the optically pumped FIR laser (OPFIRL) system was studied. The iteration method has been used to calculate the power density of the pumping and FIR signals at any point along the optical axis of the sample tube. It was found that the power density of the FIR signal did not always increase along the length of the laser tube. There was a maximum FIR power density at the appropriate point in the sample tube. If the distance of maximum power point from the entrance of the OPFIRL tube was taken as the length of sample tube Z_opt, the maximum FIR laser output should be obtained. This was the optimum length of OPFIRL tube. The value of Z_opt was closely related to the parameter of OPFIRL such as the pumping power density, the pumping detuning and the frequency of the FIR laser. The energy-exchange and the maximum output of the fir laser were calculated under the ideal condition.     

超快光电测量技术

本文综述了近年来趔快光电测量技术的新进展，其中包括扭快光电材料的特性、高速光电器件的基本原理，着重介绍了若干主要的用快光电测量技术．