冲击作用下凝聚态含能材料热点形成热－机械分析

应用动力有限元方法分析含能材料中热点形成机理。在假定凝聚态含能材料为可压缩的情况下，研究圆形和椭圆形微孔洞附近介质在冲击作用下热－机械响应过程，结果显示冲击波强度、空隙率、微孔洞尺寸和形状、熔点对热点温升有强烈影响，并讨论粘塑性功和固相压缩成为主要机制的条件。     

多循环脉冲爆震发动机流场数值研究

针对二维带有收敛扩张喷管的脉冲爆震发动机模型，采用带基元化学反应的Euler方程组和H2、空气的9组分20基元反应，对发动机在前六个工作循环的流场进行了数值模拟。通过对前几个循环流场进行比较，发现脉冲爆震发动机在第五个循环后流场就基本稳定，单循环得到的流场和多循环稳定后的流场有很大的差别，同时喷管对发动机内流场影响特别大。     

含能材料三轴动态压缩实验的一个计算机模拟方法

在含能材料单轴、受限三轴动态压缩实验的基础上，提出一种将计算机数值模拟和实验数据相结合，估算实验系统中钢筒与试件间的库伦摩擦力，从而正确确定含能材料的动态三轴力学性能（弹性模量Ｅ，泊桑比ν，屈服限Ｙ等）的方法。本方法用于ＴＮＴ炸药受限三轴动态压缩实验，通过建立钢筒－试件的库伦摩擦有限元模型，采用ＡＤＩＮＡ通用程序进行动力分析，估算了摩擦力对实验数据的影响，获得了考虑摩擦力修正后的ＴＮＴ三轴动态压缩响应，为含能材料三轴动态力学性能的确定提供了一种有效的方法。     

RESEARCH ON ELECTROMAGNETIC RADIATION DURING THE EXPLOSION PROGRESS OF COMPOSITION B EXPLOSIVES$^{\bf 1)}$

炸药爆炸过程中产生明显的电磁辐射干扰在很多领域引起了重视, 爆炸产生电磁辐射的机理和理论模型都不成熟, 实验仍然是研究这一现象的重要手段. 本文设计了不同质量的B炸药爆炸电磁辐射实验, 测量了爆炸整个过程中不同时刻的电磁辐射信号. 通过小波分析方法对实测信号进行处理, 得到真实信号和信号的时频特点, 小波分析得到真实信号的频谱主要分布在0$\sim$50 kHz. 利用自主开发的EXPLOSION-3D软件对实验工况进行数值模拟, 得到爆炸过程不同时刻流场的特点. 对比实验结果和数值模拟结果得出: 第一个脉冲信号是由B炸药爆轰产生的高温高压等离子体直接产生的电磁脉冲; 第二个脉冲信号是由地面反射的冲击波追上前沿冲击波, 空气冲击波阵面处形成的等离子体产生的电磁脉冲; 第三个脉冲信号是冲击波撞击测量线圈引起的无效信号. 其中, 第一个电磁脉冲幅值与当量的1/3次方基本呈线性关系, 其到达时间对炸药药量不敏感; 第二个电磁脉冲出现的时间与炸药的当量成指数关系, 药量越大, 出现时间越晚. 通过对第二个脉冲信号的分析, 得出了冲击波反射形成电磁脉冲信号时的爆炸波流场特征, 为后续相关理论机理研究提供了验证数据.     

Mechanism of Fatigue-Crack Growth under Compressive External Stresses

A specimen with a crack shaped like a thin long defect with parallel edges and a rounded tip of finite radius is considered. When the specimen is subjected to compressive cyclic loads, the stresses in zones adjacent to the crack tip vary according to a sign-variable cycle because of plastic strains occurring at the crack tip. This can cause fatigue-crack growth. Results of numerical simulations and experimental data support the possibility of fatigue-crack growth in the field of compressive external stresses. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 6, pp. 108–115, November–December, 2005.     

Thermoconductivity and thermoelasticity of thin isotropic shells heated by a moving heat pulse

The paper presents a solution to the problem of thermal conduction and thermoelasticity for a thin shallow spherical shell heated by a concentrated or local impulsive heat source moving over the shell surface. It is assumed that temperature is linearly distributed across the shell thickness and that the shell, on its sides, exchanges heat with the environment in accordance with Newton’s law of cooling. The Fourier and Laplace transforms are used to find an analytic solution. The dependence of the temperature field and stress/strain components on the type of heating and the form of heat source is studied __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 11, pp. 85–92, November 2006.     

拉压性能不同材料全量型本构关系及厚壁筒的应力分析

将经典全量理论作了推广，考虑了应力状态及塑性体积变形对拉压性能不同材料的塑性行为的影响。应用该本构模型分别计算了厚壁筒在内压和外压作用下的应力分布。给出了径向应力、环向应力和轴向应力沿壁厚的分布图。将本文的计算解与拉压性能相同(不考虑体积变形、强化曲线唯一)的幂函数强化材料的厚壁筒的理论解进行了比较。结果表明，材料的拉压性能不同对厚壁筒的环向应力和轴向应力影响较大。因此，对于拉压性能不同材料，考虑到其对应力状态及塑性体积变形敏感时，是不能将其简化成拉压性能相同、体积不可压缩、强化曲线唯一的理想材料。     

Numerical modeling of the disturbances of the separated flow in a rounded compression corner

Numerical modeling of the time-dependent supersonic flow over a compression corner with different roundness radii is performed on the basis of the solution of the two-dimensional Navier-Stokes equations in the regimes corresponding to local boundary layer separation. The development of unstable disturbances generated by local periodic injection/suction in the preseparated boundary layer is calculated. The results are compared with those of similar calculations for a flat plate. It is shown that the natural oscillations of the boundary-layer second mode stabilize in the separation zone and grow intensely downstream of the reattachment point. The acoustic modes excited within a separation bubble are studied using numerical calculations and an asymptotic analysis.     

颗粒型砂介质的受压力学特征及屈服滑动

提出颗粒型砂介质在压实过程中的两种特征：孔隙填充状态和颗粒滑动状态；针对孔隙填充状态的力学行为特征，提出相对体积改变量(压实量)作为表征此状态的特征参量，研究了瞬时压缩模量与压实量的函数关系；针对型砂的颗粒滑动状态，提出具有强化效应的Mohr-Coulomb屈服条件，推导描述颗粒屈服滑动状态的增量本构方程、以及三轴压实过程条件下的状态本构方程，最后，就不同侧向压力下的三轴压缩试验、带模样的型砂压实试验的大量试验数据进行处理和验证。     

Simultaneous measurement of transient stress and flow birefringence in one-sided compression (biaxial extension) of a polymer melt

Summary Investigation of time dependent behaviour of a polystyrene melt is carried out with the aid of a new apparatus for biaxial extension. Use is made of the method of two impinging fluid streams guided by lubricated trumpet shaped metal walls. The flow birefringence is measured in the plane of symmetry and, at the same time, the force is measured which tends to separate the trumpets. The linear stress-optical relation turns out to be valid in this new flow geometry. An accurate value for the stress-optical coefficient can be determined from the relaxation experiments. The stress build-up as calculated from the optical measurements, is compared with the pertinent result of the theory of linear viscoelasticity. For the desired interconversion of dynamic moduli use is made of the approximation by Schwarzl and Struik. The steady state measurements are checked by the results of the non-linear model of Acierno et al.With 16 figures and 2 tables