Decomposition of vegetables for determination of Zn,Cd, Pb and Cu by stripping voltammetry

A simple and accurate digestion method using nitric acid, perchloric acid and hydrogen peroxide has been developed for use in trace analysis for heavy metals in vegetables by differential pulse anodic stripping voltammetry. The recovery of the metals from the samples is lower if the hydrogen peroxide is omitted from the digestion mixture. Standard reference materials have been analysed satisfactorily by this method.     

纳秒电光调Q Nd:YVO4激光器

介绍了一种新颖的短腔电光调Q窄脉宽激光器,通过分析影响脉宽的主要因素,确定了激光器的结构及参数。在准连续端面泵浦条件下,采用掺杂原子分数为1.0%、沿a轴切成布儒斯特角的Nd:YVO4晶体作为增益介质,直接获得偏振光振荡,有效缩短了腔长。在物理腔长20 mm时,采用退压式电光主动调Q结构,减小了插入损耗,获得了脉冲宽度为1.049 ns、单脉冲能量为0.32 mJ、光束质量平方因子为1.9的稳定激光输出。     

变压器寄生参数和负载特性对高压脉冲波形的影响

构建了输出电压幅值为0～20 kV、脉冲重复频率为0.25～20 kHz的双极性高压脉冲电源实验平台,研究了变压器寄生参数与负载特性对输出脉冲波形的影响。采用等效电路复频域解析方法,分析了变压器寄生参数对输出脉冲波形的上升沿、平顶及下降沿的影响规律,并通过改变变压器绕线方案间接验证。发现变压器分布电容和漏感越大,输出脉冲波形上升沿与下降沿越平缓,过冲电压幅值越大,并采用脉冲变压器二次侧均匀密绕、一次侧均匀疏绕、高匝数的方案进行优化。进一步分析了纯阻性、阻容性或阻感性负载特性对输出高压脉冲波形的影响规律,发现电阻值增大（5～50 kΩ）,过冲电压幅值增大,脉冲上升沿和下降沿变陡;当负载电阻回路串联小电容时,过冲电压幅值显著增大,而电容值高于一定值时输出脉冲波形恢复至与纯电阻波形一样;当负载电阻回路串联电感时,输出脉冲波形下降沿变平缓。     

叠加态下3色场波形优化增大谐波辐射截止能量及强度

在He~+离子1s态和2s态的叠加态作为初始态时,提出一种优化3束激光场来增大谐波截止能量和强度的方法.结果表明:在叠加初始态下,谐波强度要比基态初始态下增强3个数量级以上.随后,在3色场波形优化下,谐波截止能量又得到增大,进而获得一个高强度、高光子能量的谐波光谱连续区.通过叠加光谱连续区上最后100次的谐波可以获得一个27 as的孤立阿秒脉冲.     

飞秒激光脉冲在正色散固体材料中的自压缩

实验研究了正色散固体介质中的激光脉冲自压缩现象,证明了无需任何外加色散补偿情况下，固体透明介质中的自聚焦传输过程可使高功率飞秒激光脉冲实现时域脉冲压缩，并详细研究了输出脉冲的时域和频域特性随入射脉冲强度的演化规律.实验结果表明脉冲自压缩量随入射脉冲强度的增加呈递增趋势，然而当入射光强增大到足以引起超连续谱及锥形辐射产生时，脉冲时域形状会发生分裂.此外还发现发散光束入射情况下同样可以观察到脉冲自压缩现象. 关键词： 超短激光脉冲 脉冲压缩 非线性传输     

Intrinsic Flexibility of the Zeolitic Imidazolate Framework ZIF‐7 Unveiled by CO2 Adsorption and Hg Intrusion

ZIF‐7, built as an assembly of Zn^II centers and benzimidazolate ligands, shows prominent S‐shaped isotherms upon CO₂ adsorption that can be attributed to sorbate‐induced gate‐opening phenomena involving a narrow‐to‐large pore phase transition. This peculiar sorption pattern can be captured via the formulation of thermodynamic isotherms, providing a direct enthalpic and entropic view of the gate‐opening process. Relying on such an approach, an energy barrier with preferential enthalpic nature for CO₂ adsorption/desorption in the gate‐opening region could be unveiled. Moreover, the elastic energy involved during the gate‐opening process was revisited to 1.4–2.8 kJ mol^?1 of solid in the temperature range 273–323 K, matching the value measured by isostatic compression of a ZIF‐7_lp sample filled with DMF and showing a dominant entropic contribution.     

直流固态继电器电磁脉冲失效模式实验研究

采用电流注入法对某型直流固态继电器输入端与输出端的电磁脉冲损伤机制及失效模式进行了实验研究,结果表明：输入端注入电磁脉冲信号时,输出端会产生误动作,并可造成输入电路中三极管BE节产生短路损伤,导致输入端施加控制信号时输出端无法导通;输出端注入电磁脉冲信号时,可造成输出电路中MOSFET管的栅极和漏极产生短路损伤,导致输出端短路。     

不同鉴别阈值条件下SiPM光子计数激光雷达探测模型及性能分析

硅光电倍增管（Silicon Photomultiplier, SiPM）具有极高的探测灵敏度和响应速度,且在多光子条件下具有较高的动态范围以及线性响应的特性,在光子计数激光雷达应用中有独特的优势。然而,由于SiPM多像元、单时间通道的工作模式,其输出电压信号相较于其他单光子探测器更大概率出现脉冲堆叠现象,不同鉴别阈值条件下的SiPM探测过程更为复杂。针对该问题,本文建立了SiPM光子事件响应模型,以此为基础分析了由脉冲堆叠引发的屏蔽效应和触发效应两种特殊情况的时域分布,最终建立了SiPM半解析的探测概率与虚警概率模型。同时,搭建了基于SiPM探测器的光子计数雷达系统,通过观察实测输出电压波形以及光子点云分布与理论模型相符（R²>0.95）。通过查全率与查准率对不同鉴别阈值的SiPM光子点云分布进行定量评价,并给出最优鉴别阈值区间,这对基于SiPM的光子计数激光雷达系统硬件参数的优化设计以及探测性能的定量分析具有重要的指导意义。     

Pulsed ytterbium-doped large mode area double-clad fiber amplifier in MOFPA configuration

A pulsed master oscillator fiber power amplifier working in nanosecond range has been developed. An ytterbium-doped double-clad (large mode area) optical fiber was used as an amplifying medium. Actively Q-switched Nd:YVO laser was used as a seed of light pulses. The system worked at the repetition rate from 10 kHz to 40 kHz. At the amplifier output, pulses of 10.9 kW peak-power were achieved. The laser system worked at the slope efficiency of 30%.     

利用半导体光放大器进行光脉冲消基座的理论研究

提出了一种利用半导体光放大器(SOA)联合可调谐光滤波器进行高阶孤子压缩消基座的新方法.进行了详尽的理论分析和优化.数值计算表明,在一定条件下,这种方法能够在不展宽脉冲的前提下,对基座进行有效地抑制.