基于嵌入式系统的触摸屏驱动设计与实现

为了满足触摸屏性能良好、运行稳定精度高的要求,本文提出了一种基于嵌入式系统的触摸屏驱动设计与实现方法。本方案以S3C2410微处理器为核心,采用嵌入式操作系统,设计与实现触摸屏驱动程序,测试证明本驱动工作高效、稳定。     

积层(Build-up)封装工艺的发展及其设计挑战(1)

回顾了自1988年以来的逐次积层(SBU)层压基板的发展过程。文中报告了IBM自2000年采用的这种工艺的开发过程。这些层压基板是一种非均匀性结构,有3部分组成:芯板,积层和表面层,每一部分都是为满足封装应用的需求而开发。薄膜工艺极大提高了SBU层压基板的绕线能力,同时也使得这种工艺非常适合高性能设计。本文着重阐述了IBM在将该工艺用于ASIC和微处理器封装时,在设计、制造和可靠性测试等各个阶段所遇到的挑战。     

Analog Circuit Design Methodology in a Low Power RISC Microprocessor

There are various kinds of analog CMOS circuits in microprocessors. IOs, clock distribution circuits including PLL, memories are the main analog circuits. The circuit techniques to achieve low power dissipation combined with high performance in newest prototype chip in the Super H RISC engines are described. A TLB delay can be decreased by using a CAM with a differential amplifier to generate the match signal. The accelerator circuit also helps to speed up the TLB circuit, enabling single-cycle operation. A fabricated 96-mm² test chip with the super H architecture using 0.35-m four metal CMOS technology is capable of 167-MHz operation at 300 Dhrystone MIPS with 2.0-W power dissipation.     

A rapid turnaround design of a high speed VLSI search processor

Performance of relational database systems is a major impediment to their use in many applications. We have designed and implemented a customized RISC processor to accelerate associative search and aggregation operations for relational database systems. Since the processor is programmable and supports many queries concurrently, a system utilizing tens of such processors is capable of handling thousands of complex search requests simultaneously.

While the design of a VLSI programmable processor is a complex process, research prototyping requires a fast turnaround design process. We took advantage of the logic programming paradigm and the silicon compiler technology to explore and simulate architecture alternatives prior to the actual implementation. The prototyping process allowed us to complete the chip design in nine months. The resulting processor, fabricated in 2 Itm CMOS technology, consists of 91,000 transistors, executes over 18 million predicate evaluations per second, and searches database contents at 74 megabytes per second.     

Image reconstruction from acoustical holograms using microprocessors

An acoustic imaging system using holographic techniques is described. Insonification of the object is achieved using a phased array scanner. Image reconstruction uses Fourier Transformations to produce a 128 × 128 pixel TV display. The system has the ability to focus in the ‘near field’ of its transducer arrays and has a frame rate of approximately 0.3 Hz.     

PT泵的微机测试系统的设计

为实现PT泵的自动化测量,以单片机为核心设计一种多功能PT泵检测系统。该系统具有燃油流量检测、油泵压力检测、油温检测、转速检测等功能,可实现PT泵各种参数的数字化测量,并且具有功能齐全、结构简单等特点．适用于多种PT泵的性能检测。     

阵列式无线压力传感器系统设计与迟滞补偿研究

为提高传统硅压阻式压力传感器的测量精度,针对性地设计与实现了一种带有迟滞误差校正功能的阵列式无线压力传感器系统。该系统采用了硅压阻式传感器阵列和高精度模数转换器AD7794,以STM32微处理器作为数据采集和信号处理的核心部件,并通过无线蓝牙传输模块将测量数据发送至手机接收端,以手机APP显示测量结果有利于用户对压力实现无线监测。针对硅压阻压力传感器的迟滞非线性,基于最小二乘法与函数校正法对压力传感器阵列的输出信号进行了非线性和迟滞误差补偿,结果表明：迟滞误差从原来的±0.152%降为±0.077%,,有效地提高了系统的测量精度。     

基于微处理器的遥控水热毯控制系统设计

介绍了一种水热毯的新型控制系统,以AT89C52单片机为核心,配合ADC0809芯片,用双向可控硅控制加热片的工作.系统软件用C语言编制,实现了温度在一定范围内连续可调、定时启/闭、被窝预热等功能.实现了温度智能控制,其温度和定时时间均可在液晶屏上显示.红外遥控电路主芯片采用PT262/PT2272遥控编解码芯片.遥控器的引入实现了系统的远距离控制.     

基于单片机的超声波测距系统的设计

介绍了利用单片机控制的超声波测距系统的原理，由单片机控制时间计数、控制超声波的发射和接收。给出了系统构成，并在数据处理中采用了温度补偿修正。此系统具有易控制、工作可靠、测量精度高的优点。     

基于微处理器核的媒体系统芯片结构设计

围绕基于微处理器核的AAC解码器结构设计展开讨论，对IP定制、数据通路及存储设计进行了研究，并成功开发了一个基于微处理器核的MPEG-4AAC解码系统芯片。