T型微混合器混合特性的浓度分布评价法

提出一种微混合器混合性能的评价方法.在样品盒中注入不同浓度罗丹明B溶液并用体视显微镜观察捕获图像,通过Image J软件读取图像灰度值,建立不同深度下溶液的浓度-灰度值函数关系,运用此关系式将T型微混合器3种不同深度(0.1、 0.2和0.4 mm,质量浓度0.05 %的罗丹明B溶液和去离子水作为配对流体)混合实验中捕获的图像中各像素点上的灰度值转换为浓度值,绘制浓度等高线图及浓度频数分布图,分析各自混合情况,最后引入浓度混合指数概念及计算公式,分析3种深度混合器内不同截面上的混合程度.此方法从定性和定量两方面分析了微尺度下混合腔深度对微混合的影响程度,具有一定的应用价值.     

Supernovae and the Arrow of Time

Supernovae are explosions of stars and are a central problem in astrophysics. Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities develop during the star’s explosion and lead to intense interfacial RT/RM mixing of the star materials. We handle the mathematical challenges of the RT/RM problem based on the group theory approach. We directly link the conservation laws governing RT/RM dynamics to the symmetry-based momentum model, derive the model parameters, and find the analytical solutions and characteristics of RT/RM dynamics with variable accelerations in the linear, nonlinear and mixing regimes. The theory outcomes explain the astrophysical observations and yield the design of laboratory experiments. They suggest that supernova evolution is a non-equilibrium process directed by the arrow of time.     

基于非线性材料二次谐波与混频特性非逻辑门运算的全光实现

Optics has already been proved as a successful candidate for conducting parallel logic, arithmetic and algebraic operations. Several all-optical data processors were proposed since last few decades. To implement these systems, different data encoding decoding techniques such as polarization encoding, tristate, quartenary state, multivalued state, symbolic substitution technique etc. have already been proposed. All these are done to use optics in a suitable platform. We propose here a new concept of encoding data by adopting frequencies variation technique for conducting a inversion operation successfully.     

高填充量碳纳米管/丁苯粉末橡胶机械混炼的物理化学机制

将用喷雾干燥法制备的碳纳米管(CNTs)/丁苯粉末橡胶复合材料在开炼机上机械混炼, 考察机械混炼对复合材料常规力学性能的影响, 并对机械混炼对CNTs增强丁苯橡胶复合材料力学性能的影响进行相应的理论研究和机理分析. 结果表明, 与混炼前的复合材料相比, 机械混炼有效地提高了CNTs/丁苯橡胶复合材料的力学性能, 特别是当CNTs加入量较大时, 提高幅度更为显著, 与填充传统补强剂CB复合材料相比, 具有较大的优势. 这是因为机械混炼一方面使CNTs在橡胶基体中获得了更为充分均匀的分散; 另一方面, 混炼过程中产生的自由基以及巨大的剪切力, 使得CNTs与橡胶基体间界面结合如物理吸附、氢键作用、化学结合等得到了进一步增强, 提高了CNTs/丁苯橡胶复合材料的结合橡胶含量, 更好地发挥了CNTs对丁苯橡胶的补强效应, 从而提高了复合材料的拉伸强度和撕裂强度等力学性能. CNTs补强丁苯橡胶复合材料力学性能的机理符合“强键和弱键学说”.     

简并四波混频实现全光信号幅度整形的系统设计

对光纤中简并四波混频(DFWM)耦合波方程进行数值求解,通过分析发现:泵浦光功率的增大会导致泵浦光与反斯托克斯光之间能量交换周期减小。阐述了优化光纤中DFWM实现全光信号幅度整形的机理。在此基础上设计了一个优化的全光信号幅度整形系统,并进行了系统仿真,结果表明:通过再生系统后,信号的消光比从9.46 dB提升到30.40 dB,品质因子从15.95提升到了180.40。     

光纤四波混频多波长时钟信号整形

将两路时钟信号作为泵浦光,与连续探测光一同耦合进高非线性光纤中,四波混频产生的两路闲频光作为整形后的时钟信号,并通过控制两路时钟信号之间的相对时间延迟来减小光纤四波混频干扰。研究了整形前时钟信号占空比的变化与整形后时钟质量的关系以及最佳占空比下输入时钟信号和输出时钟信号的相对幅度抖动的关系,发现在占空比由小到大变化的过程中,整形后时钟信号的质量总体上先变好后变坏;在最佳占空比0.14下,两路时钟信号的相对幅度抖动由原来的13.934 9%和13.958 6%下降到2.03%和2.12%,表明了该方案的可行性。     

Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu–Se film

This paper describes the structural and optical properties of Cu–Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu–Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu–Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe₂. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu–Se films. Red shift and asymmetry of Raman mode characteristic for CuSe₂ enable us to estimate nanocrystal dimension. In the analysis of the far-infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell-Garnett approximation) and substrate, has been applied.     

Optical switching and alignment of antiferroelectric liquid crystals containing an azo group

The optical properties of two kinds of photochromic antiferroelectric liquid crystal (AFLC) containing an azo group have been examined. Depending on the substituting group at the chiral centre, these AFLCs showed different photoinduced phase transitions by Ar⁺ laser light irradiation. This phase transition has led to a new form of optical switching controlled by a bias voltage. In addition, it was found that these AFLCs caused an azimuthal photoalignment effect regulated by linearly polarized Ar⁺ laser light irradiation. These phenomena were applied to image storage.     

Nuclear Structure and Electromagnetic Transitions Investigation in Er Isotopes within Framework of Interacting Boson Model

Interacting Boson Model-2(IBM-2)is used to determine the Hamiltonian for Er nuclei.Fit values of parameters are used to construct the Hamiltonian,energy levels and electromagnetic transitions(B(E2),B(M1))multipole mixing ratios(δ(E2/M1))for some even-even Er nuclei and monopole transition probability are estimated.New ideas are used for counting bosons number at N=64 and results are compared with previous works.     

Numerical analysis of enhanced mixing in a Gallay tote blender

The mixing performance of a multi-bladed baffle inserted into a traditional Gallay tote blender is explored by graphic processing unit-based discrete element method software. The mixing patterns and rates are investigated for a binary mixture, represented by two different colors, under several loading profiles. The baffle effectively enhances the convective mixing both in the axial and radial directions, because of the disturbance it causes to the initial flowing layer and solid-body zone, compared with a blender without a baffle. The axial mixing rate is affected by the gap between the baffle and the wall on the left and right sides, and an optimal blade length corresponds to the maximum mixing rate. However, the radial mixing rate increases with the blade length almost monotonically.