2,3-二羟基萘钼多酸有机衍生物的合成及1H NMR和IR谱学研究

本文对二种新合成的2，3－二羟基萘二钼和四钼多酸有机衍生物[n-Bu)4N]2[Mo2O5(OC10H6O)2](Ⅰ）和[n-Bu)4N]2[Mo4O10(OC10H6O)2(OCH3)2](Ⅱ)进行了红外光谱与核磁共振波谱研究，发现[Mo2O5]^2 中钼氧多桥键的红外振动频率较[Mo4O10(OCH3)2]^2 中钼氧多桥键的红外振动频率红移，而在配合物Ⅱ中2，3－二羟基中芳环的^1H化学位移较配合物Ⅰ中向低场移动。同时还发现含二钼配位中心[Mo2O5]^2 的[Mo2O5(OC10H6O)2]^2-与含四钼配位中心[Mo4O10(OCH3)2]^2 的[Mo4O10(OC10H6O)2(OCH3)2]^2-生成条件的差异仅仅只在反应体系的pH值的微小变化，说明钼多酸有机衍生物阴离子是对体系酸碱度极为敏感的物质。     

混杂配体金属簇合物的分子振动光谱与结构

由于原子簇化合物在催化，生物活性，功能材料等方面所呈现的重要性，使其成为无机和物理化学最重要的研究领域之一。文章中和谱学方法对一些具有混配体的过渡金属簇合物的结构及其两者之间的关系进行.     

Vibrational spectra of (NH4)3ZnCl5

IR and Raman spectra of (NH₄)₃ZnCl₅ have been recorded. The observed spectra have been analysed on the basis of the vibrations of ZnCl ₄ ²⁻ and NH ₄ ⁺ ions. The appearance of multiple Raman bands indicates the presence of two different types of ammonium ions. The effect of anisotropic crystalline field over the ZnCl₄ and NH₄ tetrahedra is also discussed. The assignment of internal modes has been verified by the potential energy distribution calculations.     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

红外目标模拟器校准系统的研制与应用

采用标准辐射和红外目标模拟器的辐射交替折转进入红外光谱辐射计的方法，研制的红外目标模拟器校准系统可以对红外目标模拟器进行直接校准．该系统由标准准直辐射源，光束偏转装置和红外光谱辐射计组成．标准准直辐射源由工作温度为50℃～1050℃的标准黑体和口径300mm的离轴抛物面作主镜的准直光管组成．光束偏转装置由口径465mm的反射镜和定位精度5″的转台组成．红外光谱辐射计采用圆形渐变滤光片CVF对入射的辐射分光，3个光谱工作区间为1μm～3μm，3μm～5μm和8μm～14μm。3个区间的测试数据显示了最小可校准的光谱辐照度低于10^-11／cm^2，系统的相对标准不确定度为2％．     

Manganese(II) complexes with diethylamine in aqueous solutions

Interaction between MnCl₂ and diethylamine (DEA) in aqueous solutions has been studied by UV, IR, and EPR spectroscopy as part of the design and research program on models of natural photosystems. The composition of the precipitate for comparable concentrations of reagents and solute oxygen has been investigated. Mn(II) was found to be oxidized with oxygen to give MnO₂·H₂O as a precipitate. In the solution over the precipitate, Mn(III) complexes with DEA are formed; the complex molecule has four and six amine molecules in the coordination sphere.     

Influence of the network chain orientation on the fracture toughness of a mesogenic epoxy resin modified with CTBN

A biphenol‐type epoxy resin, which had a mesogenic group in the backbone moiety, was modified with carboxy‐terminated butadiene acrylonitrile copolymer (CTBN) as a reactive elastomer, and its fracture toughness was measured. With the addition of CTBN, the fracture toughness of the biphenol‐type epoxy resin significantly increased and became significantly higher than that of a bisphenol A‐type epoxy resin modified with CTBN. The network chain orientation in the cured biphenol‐type epoxy resin system was clearly observed during the fracture process with polarized microscopy Fourier transform infrared measurements, although such a phenomenon was not observed in the bisphenol A‐type epoxy resin system. The high toughness of the cured biphenol‐type system was clearly due to the consumption of the mechanical energy by a large deformation of the matrix resin due to the orientation of the network chains during the fracture process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1198–1209, 2003     

Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

流延热释电厚膜陶瓷制备单元红外探测器

本文报道采用流延法制备的热释电厚膜陶瓷材料直接装配的单元红外探测器，该方法大大简化了目前探测器的制备工艺，极大地提高了材料的利用率，器件的性能也达到了目前探测器的水平。