QuantBasic软件用于红外光谱定量分析

化学计量学原理引入到红外光谱学后 ,使得红外光谱定量分析有了突破性进展。利用 MB15 4S型FTIR光谱仪专配的 Quant Basic定量软件 ,对红外光谱定量分析中基线取法进行了研究 ,并得出最优方法。通过对己二酸进行定量分析 ,验证了此软件对混合物中单组分定量不仅操作简便 ,快速可行 ,而且简化了训练集的建立和样品前处理     

磺化壳聚糖的制备及IR光谱

将片状壳聚糖溶解制成凝胶 ,冷冻分离 ,洗涤 ,DMF-苯蒸馏除水后 ,以氯磺酸 - DMF为磺化试剂 ,在适当条件磺化 ,获得水溶性良好的磺化壳聚糖 ,用红外光谱进行了结构表征。     

傅里叶变换红外光谱仪探测器仪器响应函数研究

由于傅里叶变换红外光谱仪探测器在各个波段的仪器响应不相同,在应用过程中无论是利用光谱的绝对强度还是相对强度,都需要应用标准黑体对仪器进行定标,找出仪器响应函数。该文对加拿大BOMAN公司MR154型傅里叶变换红外光谱议配带的两个红外探测器(锑化铟InSb、碲镉汞MCT)的仪器响应函数进行了研究,并找出了它们随黑体温度(辐射亮度)的变化规律。该规律对傅里叶变换红外光谱仪的定标和保证所测辐射谱的正确性有重要意义。     

红外视景仿真技术及其研究进展

从红外视景仿真技术意义出发，介绍了其所包含的几个基本部分；从目标辐射建模、背景辐射建模和大气建模三方面，总结了国内外红外视景仿真技术发展历程和状况。其中列举了国外多个典型红外视景仿真软件和几个较完善红外辐射模型，并统计了2000年以来国内高校在红外视景仿真方面的研究情况。统计数据表明，多个发达国家的红外视景仿真技术已逐步趋于成熟和产品化，而国内尚未开发出功能较完善的红外视景仿真系统，只能仿真较简单场景。     

光谱法研究MC尼龙6/芳纶复合材料的结构

将经甲苯二异氰酸酯(TDI)和己内酰胺改性的Kevlar纤维作为MC尼龙6的增强体,X射线光电子能谱观察到改性后纤维表面C,N和O元素的含量发生了改变,谱峰也相应发生变化。从红外光谱分析发现,Kevlar纤维和MC尼龙6相混所得谱图只是二者红外谱图的简单叠加,而改性Kevlar纤维可作为己内酰胺阴离子开环聚合的活性中心,且接枝链上的酰胺基可以与基体尼龙形成较强的氢键,有利于提高界面结合。XRD测试表明Kevlar纤维的引入并没有明显改变MC尼龙6的晶型,但其晶粒将具有更严格的三维周期性结构。在相同纤维用量时,改性Kevlar纤维增强的MC尼龙6的晶粒较未改性纤维的完善。当纤维含量小于2%时,纤维的加入有利于生成完善的α球晶,纤维含量大于2%时,α球晶结构含量随着纤维用量的增多反而下降。     

Influence of radiation damage on lattice vibration parameters in crystalline and vitreous SiO2

The influence of radiation damage on a number of lattice vibration parameters in two SiO₂ modifications was investigated using IR reflectance spectroscopy. The radiation kinetics of changes in spectral characteristics of SiO₂ fundamental vibrations in crystalline and glassy states were determined. The reflectivity coefficient and the frequency of degenerate vibrations as functions of dose showed minima, the locations of which were governed by the type of sample. At high neutron irradiation doses (10²¹ cm⁻²), certain characteristics of the bands had the same values for both modified materials. Features of the radiation kinetics of sample dynamic parameters were determined. It was deduced that the specific character of the observed radiation-induced changes in spectral and dynamic parameters of vibrations near degenerate modes was due to both the accumulation of radiation damage and a change in the force field surrounding bridging bonds, which is related to a change in the SiO₂ structure. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 3, pp. 354–358, May–June, 2008.     

Modeling and Simulation of Saturation Gain of IR Integrated Photonic Amplifiers

IR integrated photonic amplifiers at 1.55m operation will have good foreground in optical phasedarray radars for splitters and signal processing. The saturation gain characteristics of IR integrated photonic waveguide amplifiers (taken Er³⁺Yb³⁺ co-doped phosphate glass waveguide amplifiers as an example) are studied theoretically. For the homemade laser glass materials the calculated saturation intensities are 2.22kw /cm² for signal and 10.15kw/cm² for pump. The effects of absorption saturation of signal and pump lights on the gain of amplifiers are discussed.     

等离子体辅助甲烷聚合物制备及分析

在氢气和甲烷环境下,利用辉光等离子体放电制备了聚合物。该聚合物的外观特征为白色、略发黄、柔软、丝状,易碎为粉末状。聚合物中含有–CH3,–CH2,C–O,–C=C–,–OH等官能团且不存在单质形态的碳。有机溶剂溶解分析发现,常温下该聚合物在各种有机溶剂中的溶解性极小、小于0.1mg.ml^-1,几乎不溶于甲苯中,在不同有机溶剂中的溶解度大小依次为,S丙酮>S三氯甲烷>S乙醇>S环己醇>S甲苯。低温等离子体的离化率越高、中性气体被极化时的极化半径越大、环境温度越低以及介电常数越小,聚合物的生成能力越强。     

Heat treatment effects on dielectric and physico-chemical properties of an epoxy polymer

Infrared (IR) spectroscopy, dielectric spectroscopy (DS), and thermally stimulated depolarization current (TSDC) have been used to study heat treatment effects on an epoxy-based polymer. Variations in physico-chemical and dielectric properties were examined for annealing temperatures between 55 and 170 °C. IR results have shown that heating causes both chain scission and thermal oxidation of the polymer, increasing thus the amount of trapped charges. The complex dielectric permittivity and the dielectric modulus have been analyzed, by means of DS, to highlight and separate charge relaxation phenomena from conduction contributions. Results indicate structural rearrangements, leading to a decrease of dipolar relaxation frequency (from 16 to 13.5 kHz) and an increase of the relaxation strength (around 20%). TSDC measurements have shown a current peak shift towards higher temperatures, and a significant intensity decrease, which is proportional to the quantity of released charges.     

Review of recent UV–Vis and infrared spectroscopy researches on wine detection and discrimination

Wine has become a commodity of significant commercial value, and the demand for high quality wine by consumers has been increasing. Suitable analytical techniques are needed for its quality control. Ultraviolet, Visible, Near-infrared and infrared spectroscopy is by far one of the most important techniques for determining the wine quality, including its components and characterization. This review will overview the available most recent applications of spectroscopic techniques in the past decade for wine quality prediction and discrimination both quantitatively and qualitatively. The fundamental principles of these techniques will be introduced briefly, and some innovative setups/instrumentations will also be illustrated. At last the limitations and prospects of spectroscopic techniques for wine industry will be discussed.