Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

Inviscid,laminar and turbulent opposed flows

This paper attempts to reproduce numerically previous experimental findings with opposed flows and extends their range to quantify the effects of upstream pipes and nozzles with inviscid, laminar and turbulent flows. The choice of conservation equations, boundary conditions, algorithms for their solution, the degree of grid dependence, numerical diffusion and the validity of numerical approximations are justified with supporting calculations where necessary. The results of all calculations on the stagnation plane show maximum strain rates close to the annular exit from the nozzles and pipes for lower separations and it can be expected that corresponding reacting flows will tend to extinguish in this region with the extinction moving towards the axis. With laminar flows, the maximum strain rate increased with Reynolds number and the maximum values were generally greater than with inviscid flows and smaller than with turbulent flows. With large separations, the strain rates varied less and this explains some results with reacting flows where the extinction appeared to begin on the axis. The turbulent‐flow calculations allowed comparison of three common variants of a two‐equation first‐moment closure. They provided reasonable and useful indications of strain rates but none correctly represented the rms of velocity fluctuations on the axis and close to the stagnation plane. As expected, those designed to deal with this problem produced results in better agreement with experiment but were still imperfect. Copyright © 2004 John Wiley & Sons, Ltd.     

狄拉克方程的单旋量解法以及由此引起的认识上的差异

把狄拉克方程分解成了两个单旋量的联立方程组．指出现行的自旋理论仅考虑了其中的一个方程，是以一个单旋量代替双旋量来描述状态而建立起来的．笔者在认同现行自旋理论可以作为狄拉克方程的一种求解方法，因而同意其中的某些提法外，对于其主要的物理观念：微观粒子存在着独立于现实的位形空间之外的一个自旋空间，在这个自旋空间内禀着角动量S和磁矩μ；这个自旋理论是相对论性量子力学导出的必然结论等等看法予以否定．笔者认为，只有同时考虑两个单旋量的方程，同时计及两个单旋量，才能准确地描述状态，从而正确地描述客观规律．     

Railway wheel fault diagnosis using a fuzzy-logic method

A simple method for diagnosis of railway wheel defects using fuzzy-logic is proposed. The method is based on vibration measurements at different train speeds on healthy wheels and wheels with defects known a priori. The measured vibrations are statistically analyzed and confidence intervals for healthy and defective wheels depending on train speed and frequency of analysis are established. To facilitate the implementation of the method a fuzzy-logic is adopted. The fuzzy-logic model stores the obtained experience in a database and performs the decision making on damage extent and consequently the need of preventive maintenance. In view of the obtained results, the advantages and the limitations of the proposed approach as well as suggestions for further improvements are presented and discussed.     

Lattice path combinatorics and asymptotics of multiplicities of weights in tensor powers

We give asymptotic formulas for the multiplicities of weights and irreducible summands in high-tensor powers V_λ^⊗N of an irreducible representation V_λ of a compact connected Lie group G. The weights are allowed to depend on N, and we obtain several regimes of pointwise asymptotics, ranging from a central limit region to a large deviations region. We use a complex steepest descent method that applies to general asymptotic counting problems for lattice paths with steps in a convex polytope.     

The modified characteristic finite difference fractional steps method for the coupled system of fluid dynamics in porous media and its analysis

For the coupled system of multilayer fluid dynamics in porous media, the modified characteristic finite difference fractional steps method applicable to parallel arithmetic is put forward and two‐dimensional and three‐dimensional schemes are used to form a complete set. Some techniques, such as calculus of variations, energy method, piecewise biquadratic interpolation, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L² norm are derived to determine the error in the approximate solution. This method has already been applied to the numerical simulation of multilayer fluid dynamics in porous media. © 2003 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 19: 665–681, 2003.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

部分子相互作用与(S_(NN))~(1/2)=130GeV Au-Au碰撞中两粒子的横向动量关联(英文)

采用蒙特卡罗模型AMPT 究了(S_(NN))~(1/2)=130GeV Au Au碰撞中部分子相互作用对两粒子横向动量关联的影响,结果表明部分子相互作用对两粒子的横向动量关联有重要的贡献．还计算了AMPT模型中(S_(NN))~(1/2)=130GeV Au Au碰撞的两粒子横向动量关联与碰撞对心性的依赖关系并与来自STAR的实验数据进行了比较,发现AMPT的理论预言很好地符合实验数据．     

热效应对光折变晶体两波耦合的特性影响的理论分析

用一种模型对两波耦合进行了分析，导出了强度相位的解析式，对影响两波耦合的参数进行了理论分析。分析了对ＢａＴｉＯ３光折变晶体的两波耦合的测量结果。     

Critical behavior of the two-dimensional first passage time

We study the two-dimensional first passage problem in which bonds have zero and unit passage times with probabilityp and 1–p, respectively. We prove that as the zero-time bonds approach the percolation thresholdp _c, the first passage time exhibits the same critical behavior as the correlation function of the underlying percolation problem. In particular, if the correlation length obeys(p) ¦p–p _c¦^–v, then the first passage time constant satisfies(p)¦p–p _c¦^v. At p_c, where it has been asserted that the first passage time from 0 tox scales as ¦x¦ to a power with 0<<1, we show that the passage times grow like log ¦x¦, i.e., the fluid spreads exponentially rapidly.