A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

A New Family of Binary Layered Compounds of Platinum with Alkali Metals (A = K,Rb, Cs)

By reacting platinum with alkali metals (A = K, Rb, Cs) a new family of binary alkali metal platinides has been synthesized and characterized by chemical analysis, X‐ray powder diffraction, thermal analysis (DTA and DSC), and magnetic measurements. All three compounds exhibit similar XRD‐patterns with strong reflections that can be indexed on the basis of a rhombohedral crystal system (K_xPt: a = 2.6462(1), c = 17.123(1); Rb_xPt: a = 2.6415(1) Å, c = 17.871(1) Å; Cs_xPt: a = 2.6505(1) Å, c = 18.536(1) Å; x < ½. The a lattice constant is independent on the alkali metal used and of value close to the Pt–Pt distance in NaPt₂ (2.645Å). The c parameter increases monotonically with the growing atomic radius of the alkali metal. The average structure of the alloys consists of cubic close packed layers of platinum atoms with layers of disordered alkali metals in between. For all compounds besides the strong reflections small satellites are observed which cannot be indexed together with the rhombohedral peaks in any rational 3‐dimensional lattice. However, these satellites can be indexed as incommensurate modulations within the ab plane (found propagation vectors k = (0.1011, 0.2506, 0) for Cs_xPt, and k = (0.0168, 0.2785, 0) for Rb_xPt).     

块状LaNi5基纳米合金的正电子湮灭研究

利用高温高压技术，在不同的压力和温度(-4．5GPa，-800℃)下将LaNi5基快淬合金粉直接压制成了块状纳米晶合金。X射线衍射分析表明，高压使其晶粒内部发生了明显的压致晶粒碎化，其平均晶粒尺寸在4．5GPa下从75．5nm降至24．6nm。利用正电子湮灭技术研究了这种晶粒碎化效应对纳米合金内部缺陷结构的影响。测试结果表明，在高温高压的作用下，由于界面上原子的迁移和弛豫加剧，导致晶界上尺寸较大的微孔隙缺陷逐渐转化为尺寸较小的自由体积缺陷，使得纳米合金的致密度逐渐增强，显微硬度逐渐升高，从而在高温高压下得到致密的块状纳米合金材料。     

La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。     

催化动力学法测定痕量钼的研究—盐酸联氨—Mo（Ⅵ）—邻菲罗啉—甲苯胺蓝体系

基于盐酸介质中和邻菲罗啉的存在下，钼催化盐酸联氨还原甲苯妥蓝褪色反应，建立了一种高灵敏，高选择性测定痕量钼的新方法。方法的检出限为７．６９×１０＾－７ｇ／Ｌ，线性范围０－０．１μｇ／２５ｍＬ，成功用于水和豆类中钼的测定。     

Energetic and topological analysis of the reaction of Mo and Mo2 with NH3, C2H2, and C2H4 molecules

The Density functional theory has been applied to characterize the structural features of Mo(1,2)-NH(3),-C(2)H(4), and -C(2)H(2) compounds. Coordination modes, geometrical structures, and binding energies have been calculated for several spin multiplets. It has been shown that in contrast to the conserved spin cases (Mo(1,2)-NH(3)), the interaction between Mo (or Mo(2)) and C(2)H(4) (or C(2)H(2)) are the low-spin (Mo-C(2)H(4) and -C(2)H(2)) and high-spin (Mo(2)-C(2)H(4) and -C(2)H(2)) complexes. In the ground state of Mo(1,2)-C(2)H(4) and -C(2)H(2), the metal-center always reacts with the C-C center. The spontaneous formation of the global minima is found to be possible due to the crossing between the potential energy surfaces (ground and excited states with respect to the metallic center). The bonding characterization has been performed using the topological analysis of the Electron Localization Function. It has been shown that the most stable electronic structure for a pi-acceptor ligand correlates with a maximum charge transfer from the metal center to the C-C bond of the unsaturated hydrocarbons, resulting in the formation of two new basins located on the carbon atoms (away from hydrogen atoms) and the reduction of the number of attractors of the C-C basin. The interaction between Mo(1,2) and C(2)H(4) (or C(2)H(2)) should be considered as a chemical reaction, which causes the multiplicity change. Contrarily, there is no charge transfer between Mo(1,2) and NH(3), and the partners are bound by an electrostatic interaction.     

新型的含硫族元素碳硼烷配体的三(3，5-二甲基-1-吡唑)硼氢钼配合物的合成和分子结构(英)

三齿单核三(3，5-二甲基-1-吡唑)硼氢钼配合物Tp^*Mo(O)Cl₂ (1)(Tp^*=三(3，5-二甲基-1-吡唑)硼氢HB(C₃H(Me₂)N₂)₃)与含硫族元素碳硼烷的锂盐[(THF)₂LiE₂C₂B₁₀H₁₀(THF)]<     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

不同环大小分子筛对钼基分子筛催化剂上甲烷无氧芳构化反应的影响

 钼基分子筛催化剂，由于不同分子筛的孔道大小及孔道形状不同\r\n，对甲烷芳构化反应表现出不同的催化性能．具有8元环孔道结构的小\r\n孔ERS－7分子筛没有催化活性，说明甲烷的芳构化反应离不开分子筛孔\r\n道的择形作用，较小的孔道中不能生成苯等芳烃．具有10元环孔道结构\r\n的ZSM－5，ZSM－11和ZRP－1三种分子筛具有较好的催化性能，但由于\r\n其孔道大小及孔道形状的差别在催化行为上表现出一定的差异．具有1\r\n0元环和12元环孔道结构的MCM－22分子筛，尤其对苯等轻芳烃而言，催\r\n化性能最佳．具有12元环孔道结构的JQX－1以及中孔分子筛SBA－15，\r\n虽然具有一定的催化性能，但活性较低．研究结果表明，孔道大小与苯\r\n分子动态直径相近或孔道稍大的分子筛是催化甲烷芳构化反应的良好载\r\n体，孔道过大或过小都不利于苯和萘等芳烃的生成．     

Study of non-isothermal crystallization of amorphous Cu<Subscript>50</Subscript>Ti<Subscript>50</Subscript> alloy

The crystallization kinetics of amorphous Cu₅₀Ti₅₀ has been studied using differential scanning calorimetry (DSC) under non-isothermal conditions. The curves at different linear heating rates (2, 4, 8 and 16 K min^–1) show sharp crystallization peaks. The crystallization peak shifts to higher temperatures with increasing heating rate. The Kissingers method of analysis of the shift in the transformation peak is applied to evaluate the activation energy (E _c). The KJMA formalism, which is basically developed for isothermal experiments, is also used to obtain E _c and the Avrami parameter (n).The DSC data have been analysed in terms of kinetic parameters, viz. activation energy (E _c), Avrami exponent (n) and frequency factor K ₀ using three different theoretical models. It is observed that the activation energy values derived from KJMA approach and modified Kissinger equation agree fairly well with each other. The activation energy values obtained from normal Kissinger method, and Gao and Wang expression underestimate the activation energy.The financial support provided by All India Council for Technical Education (AICTE), New Delhi (Govt. of India) is gratefully acknowledged.