Effect of selected dopants on conductivity and moisture stability of Li3PS4 sulfide solid electrolyte: a first-principles study

The first principle computational screening was performed to investigate the effect of selected dopants for Li₃PS₄ sulfide solid electrolyte on its ionic conductivity and stability toward moisture. The results suggest that substitution P⁵⁺ using isovalent cations whose electronegativity (EN) value is closer to the value of S has more significant effects on the ionic conductivity, whereby W⁵⁺ and Sb⁵⁺ can improve most. Similarly, aliovalent cation substitutions with compensating changes in the lithium-ion concentration, particularly those with a lower oxidation state and higher EN, such as Cu²⁺, effectively enhance the lithium-ion conductivity in this structure. For cation dopants, it is found that ionic conductivity improvement of Li₃PS₄ is the synergetic effect of EN and oxidation number of the dopant as well as the material's lattice parameter change. Oxides of the considered cation dopants can also improve the ionic conductivity of the material but have much lower lithium-ion conductivity than the cases of cation dopants. However, the metal oxide dopants, particularly those derived from soft Lewis' acid cations, show a marginal improvement in moisture stability of the Li₃PS₄ electrolyte. The effect of halides and metal halide dopants on the lithium-ion conductivity and moisture stability of Li₃PS₄ electrolyte are also studied. It is found that metal halides are more effective than any other dopants in improving the ionic conductivity of Li₃PS₄.     

Approaches to achieve surface sensitivity in the in situ XAS of electrocatalysts

In situ and operando techniques providing information regarding adsorbate bonding and atomic arrangements on the electrode surface along with pure electrochemical measurements are needed to more fully understand the detailed mechanism of electrocatalytic reactions on high surface areas/nanoparticle electrocatalysts. X-ray adsorption spectroscopy (XAS) is a powerful tool to interrogate the electronic structure and local coordination environment of such electrocatalysts under working conditions, but it should be acknowledged that standard XAS methods are not intrinsically surface sensitive. This review will present recent in situ XAS studies on single-atom, metal, and metal oxide electrocatalysts, highlighting the approaches taken to achieve surface sensitivity by careful designing of the sample under investigation.     

Synthesis,Characterization of Cr Doped TeO2 Nanostructures and its Application as EGFET pH Sensor

In the present work, Cr doped tellurium dioxide nanostructures (CTO NS)(1 wt %, 6 wt %, 8 wt % and 12 wt %) synthesized by co precipitation method and characterized by CV, UV-Visible, SEM, XRD, XPS spectroscopic analysis. Electron beam deposited thin film of CTO NS having 12 wt % of Cr exhibited EGFET-pH sensitivity of 62.03 mV/pH at 250 °C in buffer solutions of pH 6–12, linearity 0.9345, drift rate of 1.12 mV/h and deviation of 0.01145 as compared with 1 wt %, 6 wt % and 8 wt % of CTO NS.     

Comparative analysis of CR-39 sensitivity for different sets of measurable track parameters

In the present paper the sensitivity V of plastic nuclear track detectors CR-39 to the space radiation, accelerated heavy ions in wide LET range and α-particles is studied. Different approaches for V evaluation are considered and compared. Main attention is given to the method that is appropriate for the measurement of short range heavy secondaries of space radiation. Finally, the experimental verification of the designed V function is carried out via simulation of the secondaries with low energy α-particles in the vicinity of the Bragg peak.     

Electrospray ionization stability and concentration sensitivity in capillary electrophoresis-mass spectrometry using a flow-through microvial interface

Concentration sensitivity is a key performance indicator for analytical techniques including for capillary electrophoresis-mass spectrometry (CE–MS) with electrospray ionization (ESI). In this study, a flow-through microvial interface was used to couple CE with MS and improve the ESI stability and detection sensitivity. By infusing a peptide mixture through the interface into an MS detector at a typical flow rate for CE-MS analysis, the spatial region near the interface was mapped for MS signal intensity. When the sprayer tip was within a 6 × 6.5 × 5 mm region in front of the MS inlet, the ESI was stable with no significant loss of signal intensity for ions with m/z 239. Finite element simulations showed that the average electric field strength at the emitter tip did not change significantly with minor changes in emitter tip location. Experiments were conducted with four different mass spectrometer platforms coupled to CE via the flow-through microvial interface. Key performance indicators, that is, limit of detection (LOD) and linearity of calibration curves were measured for nine amino acids and five peptides. Inter- and intraday reproducibility were also tested. The results were shown to be suitable for quantification when internal standards were used.     

Instrumental requirements for the detection of electron beam-induced object excitations at the single atom level in high-resolution transmission electron microscopy

This contribution touches on essential requirements for instrument stability and resolution that allows operating advanced electron microscopes at the edge to technological capabilities. They enable the detection of single atoms and their dynamic behavior on a length scale of picometers in real time. It is understood that the observed atom dynamic is intimately linked to the relaxation and thermalization of electron beam-induced sample excitation. Resulting contrast fluctuations are beam current dependent and largely contribute to a contrast mismatch between experiments and theory if not considered. If explored, they open the possibility to study functional behavior of nanocrystals and single molecules at the atomic level in real time.     

鲁棒PDF控制策略在永磁同步电机系统中的设计及仿真

对电机控制系统的经典反馈设计方案是建立在简化的受控对象模型基础之上,而实际模型参数的变化会引起控制系统性能的改变。本文针对实际应用的永磁同步电机,为了保证电机控制系统的强鲁棒性,通过对其系统灵敏度的理论推导,给出了一种新的控制器参数设计方法。该设计方法以系统灵敏度为评价指标来度量系统的鲁棒性,结合应用于二阶控制对象的伪微分反馈控制器结构,来削弱控制对象参数值的改变对控制系统性能的影响。并建立了精确的永磁同步电机仿真模型,将该方法应用于其速度控制。仿真结果表明在该控制方案下,在永磁同步电机的转动惯量和定子电阻值变化时具有较小超调量变化(小于4%)的响应特性。同时与普通PID控制对比分析,验证了用该方案设计的PMSM调速系统具有较高的抗参数变化的鲁棒性。     

基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

Application of sol–gel TiO2 film for an extended-gate H+ ion-sensitive field-effect transistor

In this study, a sol–gel TiO₂ thin film has been spin-coated on a commercial ITO glass substrate as the extended-gate field effect transistor (EGFET) for hydrogen ion sensing. The as-deposited films are further annealed at various temperatures (T_a) under ambient atmosphere. It is found that the bi-layer structure of TiO₂/ITO EGFET exhibits good linear sensitivity from pH 1 to 11. Anatase TiO₂ appeared as early as T_a = 200 °C and a brookite (121) diffraction evolved at T_a = 500 °C. No prominent influence on the surface fine structures could be found at higher T_a. Due to the reduction or disappearance of the surface hydroxyl groups on TiO₂, the sensitivities of the TiO₂/ITO pH-EGFET device are rapidly reduced. However, the influence of the conductivity decay for ITO substrates annealed at high T_a could not be excluded. A maximum sensitivity 61.44 mV/pH is achieved as T_a = 300 °C.The bi-layer structure of TiO₂/ITO exhibits better long-term stability than the traditional ITO sensing membranes. In addition, the asymmetric hysteresis is more significant in alkaline buffer solutions, which could be explained by a site-binding model because the diffusion of H⁺ ions into the buried sites of the sensing film is more rapid than that of OH⁻ ions.     

Strain rate sensitivity of polyurea coatings: Viscous and elastic contributions

Polyurea, a reaction product of isocyanates and an amine blend has been reported to be highly strain rate sensitive, which responds in its own unique way when subjected to increasing strain rates. The amine blend comprise of a long chain amine, forming the soft segments, chain extender, which brings the urea linkages closer and a crosslinker, which serves as a chemical bond between the chains. In this work, we attempt to tune the viscous contribution in polyurea, by increasing crosslinking density, while keeping the amount of chain extender more or less constant. The viscoelastic behavior and its effect on the time dependant behavior was established by extensive dynamic studies. Quasi-static tests and Split Hopkinson testing was performed over large deformation rates (10⁻⁴ to 10³ s⁻¹). It was observed that polyureas with larger viscous contribution (tan δ), were capable of exhibiting larger strain rate sensitivity.