MW级风力发电机故障诊断系统

研究了风力发电机组的故障诊断技术,以西门子安全系统解决方案作为硬件基础构建故障诊断系统,利用故障树分析法和专家系统对风力发电机组进行故障诊断,运用ST语言,开发了基于SCOUT软件的风力发电机组状态监测故障诊断系统。文章还介绍了风力发电机安全链系统的总体结构、特点和主要实现方法,对以西门子分布式安全系统为基础的安全链进行了分析。     

醇对非离子型表面活性剂浊点的影响

研究了醇对非离子型表面活性剂浊点的影响，发现直链醇的碳原子数小于４时随着其在表面活性剂中含量的增加浊点上升；当碳原子数大于４时，则随着醇含量的增加浊点下降。醇的构型对浊点起着重要作用。     

Synthesis of a new tricyclic 3-(tetrazol-5-yl)pyridine system from 2-(azidomethyl)nicotinonitriles

2-Methyl-3-cyanopyridines were converted into the corresponding 2-azidomethyl derivatives, which then underwent an intramolecular cycloaddition reaction. A novel heterocyclic system containing a 3-(tetrazol-5-yl)pyridine unit was obtained in this way.     

Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

双轴压缩下颗粒物质剪切带的形成与发展

本文采用离散元方法,研究了双轴压缩的颗粒体系在刚性边界约束下,局部剪切带的形成和发展过程,注重分析了细观的体积分数、配位数、颗粒旋转角度等参数以及力链结构形态的演变.并从颗粒体系jamming 相图中J点附近的边壁压强和配位数随体积分数的标度规律出发,分析了剪切带内外的体积分数和配位数的变化.结果表明:剪切带形成于颗粒体系的塑性变形开始阶段,此时体系发生剪胀,颗粒体积分数减小,颗粒体系抵抗旋转的能力降低,开始出现细小剪切带,随着轴向应变的继续,细小剪切带发生连接,最终导致贯穿性优势剪切带形成 关键词： 颗粒物质 力链 双轴压缩 剪切带     

1D infinite helical water chain encapsulated in a supramolecular complex based on amino acid derivate

An oligonuclear complex based on amino acid derivate had been synthesized and structurally characterized, which exhibits a three-dimensional (3D) supramolecular framework constructed from the mono-cobalt units and helical water chains stabilized in this complex. Additionally, the compound was characterized by thermogravimetric analysis (TGA), IR spectroscopy, and elemental analysis.     

轮询多址通信系统门限服务策略研究

从两方面对离散时间情况下轮询多址通信门限排队服务系统进行了研究。改进了系统服务策略，运用嵌入式马尔可夫链理论和多维概率母函数的方法，得到了改进后系统查询时间点处的平均排队队长和信息分组平均时延理论解析式，仿真结果表明分析方法有效且系统性能较之原系统得到提高；采用一种简化的近似算法，得到了轮询周期内平均队长的理论解析式，理论计算与仿真结果有较好的一致性。     

考虑溯源系统应用的优质农产品双渠道供应链决策研究

优质农产品溯源系统的引入,既能提升有效供给、缩短流通时间,又能降低流通中的数量损耗和价值损失,由此带来了双渠道供应链系统在投资、销售、定价等方面的系列决策问题。考虑制造商开辟电子渠道、从溯源系统降低流通损耗和提高质量出发,分别构建制造商主导型的双渠道供应链决策模型。通过对比分析应用前后各成员在投资、定价及销售方面的最优策略,得到相关的核心边界值。数值仿真结果表明:核心边界值主要与双重损耗的改善程度及其他参数相关,各成员及系统接受溯源系统的应用成本不同,应用成本对各渠道销量的影响程度亦不相同,但各成员调整定价的应用成本边界值是一致的。     

螺旋结构与旋光性——2.脂族链状化合物的螺旋结构和旋光性

利用弯曲键理论,详细讨论了旋光性的脂肪族链状化合物分子内存在的螺旋结构,同样是右螺是右旋的,左螺旋是左旋的。从螺旋方向可以推断旋光方向,知道旋光方向也可以推断构型。