An NMR study of the species produced by the reactions of dialkyl magnesium and HCl with calcined silica and the polymerisation performance of Ziegler-Natta catalysts produced from this support material

The effect of calcinations on the silica surface groups and thereby on the activity of Ziegler-Natta catalysts in ethylene homopolymerisation has been studied. Silica was calcined at different temperatures and treated with MgR₂ and HCl. Silica surface groups were identified by using ¹H MAS NMR and ¹³C and ²⁹Si CP MAS NMR techniques. Magnesium, titanium and chlorine were measured by elemental analysis. Ziegler-Natta catalysts were prepared from these supports and subsequently used in ethylene homopolymerisation. Maximum activity was obtained with the catalyst based on 590 °C calcined silica. The results indicate that MgR₂ reacts with siloxane-groups (Si-O-Si) in the 300 °C calcined silica, leaving the hydrogen-bonded hydroxyl-groups unreacted. Low activity Si-O-Ti(Cl)₂-O-Si species are formed after reacting with TiCl₄. The higher activity in the catalyst based on 590 °C calcined silica can be explained by the formation of -Si(R)-O-Si-O-TiCl₃ groups, originating from the siloxane bridges which cannot form in 300 °C calcined silica. Other explanations for the higher activity are a higher Mg/Ti ratio or small amounts of crystal water formed in the 590 °C calcined silica.     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

Solid-state synthesis, structural variants and transformation of three-dimensional sulfides, AGaSnS4 (A=Na, K, Rb, Cs, Tl) and Na1.263Ga1.263Sn0.737S4

New cubic-AGaSnS₄ (A=Na, K, Rb, Cs, Tl) and orthorhombic-NaGaSnS₄ compounds were synthesized by solid-state reactions and characterized by X-ray diffraction and diffuse reflectance spectroscopy. Single crystals of orthorhombic-Na_1.263Ga_1.263Sn_0.737S₄ were obtained in the crystal growth attempts of sodium compound. All six new compounds have orthorhombic AgGaGeS₄ and cubic BaGa₂S₄ structures, as determined from single crystal X-ray structures of Na_1.263Ga_1.263Sn_0.737S₄ and cubic-AGaSnS₄ (A=Na, K, Rb). Orthorhombic-NaGaSnS₄ and known layered-KGaSnS₄ undergo structural transformation to thermodynamically stable cubic form.     

3-氨基环己基甲酸和cis-3-氨基环己烯基-5-甲酸立体异构体的合成

通过手性胺拆分方法，从3-环己烯基甲酸出发分别合成得到了3-氨基环己基甲酸（ACHC）的四个立体异构体，以及cis-5-氨基-3-环己烯基甲酸（ACHEC）的二个立体异构体。     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.     

Selective Electroanalytical Assay for Cysteine at a Boron Doped Diamond Electrode

The electrochemical oxidation of the cysteine‐quinone adduct has been examined as a means of providing an electroanalytical cysteine specific detection protocol. The appliance of square‐wave voltammetry allowed 0.5 μM as a limit of detection. The effects of various biologically relevant interferences including other thiols were studied and found to present no change in the voltammetric profile. The practical applicability and efficiency of the methodology was probed through the determination of cysteine concentration in growth tissue medium.     

Rapid quantification of HIV protease inhibitors in human plasma by high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry

HIV protease inhibitors are important antiretroviral drugs which have substantially reduced the morbidity and mortality associated with HIV-1 infection. Recent data have shown relationships between plasma concentrations of the protease inhibitors and clinical response, which makes therapeutic drug monitoring valuable. We have developed and validated an assay, using liquid chromatography coupled with electrospray tandem mass spectrometry (LC/MS/MS), for the routine quantification of the six licensed protease inhibitors (amprenavir, indinavir, lopinavir, nelfinavir, ritonavir and saquinavir) and the pharmacologically active nelfinavir metabolite M8 in plasma. The sample pretreatment consisted of protein precipitation with a mixture of methanol and acetronitrile using only 100 microl of plasma. Chromatographic separation was performed on an Inertsil ODS3 column (50 x 2.0 mm i.d., particle size 5 microm), with a quick stepwise gradient using an acetate buffer (pH 5) and methanol, at a flow rate of 0.5 ml min(-1). The analytical run time was 5.5 min. The use of a 96-well plate autosampler allowed batch sizes up to 150 patient samples. The triple-quadrupole mass spectrometer was operated in the positive ion mode and multiple reaction monitoring was used for drug quantification. The method was validated over the concentration ranges 0.01-10 microg ml(-1) for indinavir and saquinavir, 0.1-10 microg ml(-1) for amprenavir, 0.05-10 microg ml(-1) for nelfinavir and ritonavir, 0.1-20 microg ml(-1) for lopinavir and 0.01-5 microg ml(-1) for M8. Saquinavir-d(5) and indinavir-d(6) were used as internal standards. The coefficients of variation were always <10% for both intra-day and inter-day precisions for each compound. Mean accuracies were also between the designated limits (+/-15%). The validated concentration ranges proved to be adequate in daily practice. This robust and fast LC/MS/MS assay is now successfully applied for routine therapeutic drug monitoring and pharmacokinetic studies in our hospital.     

Physicochemical and structural properties of bacteriostatic sulfonamides: Theoretical study

A theoretical study at the Hartree–Fock and density functional theory levels is performed on sulfonamide‐type bacteriostatic compounds with the aim to provide an insight into their structure–activity relationship. The basicity of the p‐amino group is analyzed by means of the proton affinities and the protonation energies, showing that molecules presenting bacteriostatic activity are less basic, i.e., they are characterized by larger protonation energies and smaller proton affinities. The acidity of the amide group is analyzed through the deprotonation energy. The results reveal that the more acidic molecules present a larger bacteriostatic activity. This result is also confirmed from a study of bond orders. A bond order analysis of the amide group suggests that the electron attracting group in these molecules is responsible for the increase in acidity. The charge of the SO₂ group is also shown to be affected by the presence of the electron attracting group and consequently related to the acidity of the molecules. A geometric analysis shows that structures in which the amino group is more coplanar with respect to the benzenic ring possess larger bacteriostatic activity. A conformational analysis of these molecules illustrates that active molecules have relatively larger torsion energy barriers. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 165–172, 2003     

Eu1—xTbxBa2Cu3O7—δ中Tb离子价态的研究

研究了BaTbO_3、Tb_4O_7、TbFeO_3的Tb_(4d)XPS谱,找到了表征Tb~(3+)、Tb~(4+)的特征峰,得出的高、低结合能峰强之比与Tb~(4+)/Tb含量间的依赖关系,可用于确定Eu_(1-x)Tb_xBa_2Cu_3O_(7-δ)中“123”相的Tb离子混合价态,用常压高温烧结法,未能获得纯“123”单相,也不易获得纯利Tb~(3+)价态样品.在Eu_(1-x)Tb_xBa_2Cu_3O_(7-δ)中的Tb以Tb~(3+)、Tb~(4+)混合价态存在;当x=0.3时,Tb~(4+)/Tb=0.61.引入Tb~(4+)后“123”主相Cu(2)-O(2)平面上的O_(2p)空穴数降低,这是Tb~(4+)破坏超导电性的一种可能原因。     

偏钛酸型锂离子交换剂固相合成反应动力学

偏钛酸型锂离子交换剂固相合成反应动力学钟辉＊郭灵虹（成都理工学院应用化学系成都６１００５９）（四川联合大学分析测试中心成都）关键词偏钛酸锂，离子交换剂，合成，固相反应动力学１９９７－０８－２５收稿，１９９７－１２－１０修回四川省应用基础研究基金资助项...