Effect of hydrogen introduced by channelling implantation on the microstructures in silicon wafers

High-resolution transmission electron microscopy has been employed to study the platelet defects before annealing and the extended defects generated by annealing in the channelling-implanted silicon wafers. It has been found that there apparently appear platelet defects of quite great size and spacing at the maximum projected range of ions (R _max). Additionally, the cracks induced by annealing at 550 °C are generated around R _max instead of the average projected range of ions (R _p) as it is in the non-channelling-implanted samples. Moreover, after annealing at 1000 °C, cracks without branches and cavities arranging in a single array, different from the forked cracks and cavities arranged in several arrays in the non-channelling-implanted samples, are observed in the channelling-implanted silicon wafers. It is suggested that those special microstructure characteristics are ascribed to the channelling effect of implanted hydrogen ions.     

TEM study of ion implanted GaAs after pulsed electron beam annealing

Abstract

(001) GaAs single crystals were implanted with 150 keV Cr⁺ ions using a dose of 5 × 10¹⁵ ions cm^?2. The amorphized surface layers were subjected to pulsed electron beam annealing at energy densities in the range 0–1.3 J cm^?2. A detailed TEM investigation of the damaged and annealed surface layer was conducted. These observations were correlated with backscattering results.     

The (F*F) 1/4-method for the transmission problem in two-dimensional linear elasticity

In this article we present an inversion algorithm for the determination of the shape of a two-dimensional penetrable obstacle from knowledge of the elastic field generated by an incident plane compressional and shear wave. In particular, Kirsch's improved variant of the linear sampling method, the so called (F ^* F?)^1/4-method is extended to the elastic case. A mathematical analysis that reveals the compactness and normality of the far-field operator is presented. Finally, numerical results are presented showing the robustness of the (F ^* F?)^1/4-method with respect to noise.     

Optimal transmission of “television type” gaussian signals through a noiseless feedback channel

Using the methods and results of the theory of conditionally Gaussian filtering of stochastic processes and fields, an optimal scheme of “television type” signal transmission through a noiseless feedback channel is constructed under the usual power conditions, the signals being evolutionary Gaussian fields θ={θ_t(x)),tε[0,T),xεDεRⁿ . Explicit representations for optimal coding and decoding functionals, which are optimal in the sense of a special square criterion, and the expression for the error of signal reproduction are given.     

Primal mixed formulations for the coupling of FEM and BEM. Part I: linear problems

We apply the boundary integral equation method and a primal mixed finite element approach to study the weak solvability and Galerkin approximations of linear interior transmission problems arising in potential theory and elastostatics. The existence and uniqueness of solution of the resulting weak formulations and of the associated discrete schemes are derived by using the classical theory for variational problems with constraints. Suitable finite element subspaces of Lagrange type satisfying the compatibility conditions are utilized for defining the Galerkin scheme. The error analysis and corresponding rates of convergence are also provided.     

Secure message transmission in mobile ad hoc networks

The vision of nomadic computing with its ubiquitous access has stimulated much interest in the mobile ad hoc networking (MANET) technology. However, its proliferation strongly depends on the availability of security provisions, among other factors. In the open, collaborative MANET environment, practically any node can maliciously or selfishly disrupt and deny communication of other nodes. In this paper, we propose the secure message transmission (SMT) protocol to safeguard the data transmission against arbitrary malicious behavior of network nodes. SMT is a lightweight, yet very effective, protocol that can operate solely in an end-to-end manner. It exploits the redundancy of multi-path routing and adapts its operation to remain efficient and effective even in highly adverse environments. SMT is capable of delivering up to 83% more data messages than a protocol that does not secure the data transmission. Moreover, SMT achieves up to 65% lower end-to-end delays and up to 80% lower delay variability, compared with an alternative single-path protocol––a secure data forwarding protocol, which we term secure single path (SSP) protocol. Thus, SMT is better suited to support quality of service for real-time communications in the ad hoc networking environment. The security of data transmission is achieved without restrictive assumptions on the network nodes’ trust and network membership, without the use of intrusion detection schemes, and at the expense of moderate multi-path transmission overhead only.     

Revisiting the defect structure of MAX phases: the case of Ti4AlN3

Microstructural study of as-grown Ti₄AlN₃ MAX phase has been performed by transmission electron microscopy. Dislocation walls, dislocation nucleation sites and stacking faults are described. In particular, diffraction contrast analysis combined with high-resolution images give a new insight into the nature of the stacking faults: contrarily to what is usually postulated, it is shown that the stacking faults possess a shear component in the basal plane. The stacking faults are created by the insertion of MX layers in the lattice via diffusion mechanisms. Their possible role on the deformation mechanism of MAX phases is discussed.     

Effect of Fe on the glass-forming ability,structure and devitrification behavior of Zr–Cu–Al bulk glass-forming alloys

We report on the glass-forming ability and devitrification behavior of Zr₆₀Cu₃₀Al₁₀, Zr₆₀Cu₂₅Al₁₀Fe₅ and Zr_62.5Cu_22.5Al₁₀Fe₅ bulk glass-forming alloys on heating. The effect of Fe addition on the structure of Zr–Al–Cu alloys is also discussed. Crystallization kinetics and structural changes in the glassy alloys were studied using X-ray diffraction, transmission electron microscopy, differential scanning and isothermal calorimetry methods. The results indicate that good glass-formers, such as Zr_62.5Cu_22.5Al₁₀Fe₅, are located somewhat beyond the equilibrium eutectic point. Possible phase separation in the supercooled liquid on heating and electron beam-induced in situ crystallization are observed and discussed.     

Disordered bcc γ-phase to δ-phase transformation in Zr-rich U-Zr alloy

The transformation mechanism of hexagonal delta phase from the disordered bcc gamma phase has not been reported before in the Zr-rich U–Zr alloy system. With the help of X-ray diffraction, transmission electron microscopy (TEM) and high-resolution TEM analyses it was shown that the gamma to delta conversion takes place by the lattice collapse mechanism of omega transformation. It was also ascertained that a higher aging temperature or time promotes the growth of all four variants of the delta phase within a parent gamma grain. In addition, ab initio electronic structure calculations showed that the bcc to hexagonal transformation, involving partial ordering of the parent bcc phase followed by (111) plane collapse, is energetically favorable.