Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

Modeling of serine protease prototype reactions with the flexible effective fragment potential quantum mechanical/molecular mechanical method

A complete cycle of chemical transformations for the serine protease prototype reaction is modeled following calculations with the flexible effective fragment quantum mechanical/molecular mechanical (QM/MM) method. The initial molecular model is based on the crystal structure of the trypsin–bovine pancreatic trypsin inhibitor complex including all atoms of the enzyme within approximately 15–18 Å of the oxygen center O of the catalytic serine residue. Several selections of the QM/MM partitioning are considered. Fractions of the side chains of the residues from the catalytic triad (serine, histidine and aspartic acid) and a central part of a model substrate around the C–N bond to be cleaved are included into the QM subsystem. The remaining part, or the MM subsystem, is represented by flexible chains of small effective fragments, whose potentials explicitly contribute to the Hamiltonian of the QM part, but the corresponding fragment–fragment interactions are described by the MM force fields. The QM/MM boundaries are extended over the C–C bonds of the peptides assigned to the QM subsystem in the enzyme, C–C and C–N bonds in model substrates. Multiple geometry optimizations have been performed by using the RHF/6-31G method in the QM part and OPLSAA or AMBER sets of MM parameters, resulting in a series of stationary points on the complex potential-energy surfaces. All structures generally accepted for the serine protease catalytic cycle have been located. Energies at the stationary points found have been recomputed at the MP2/6-31+G^* level for the QM part in the protein environment. Structural changes along the reaction path are analyzed with special attention to hydrogen-bonding networks. In the case of a model substrate selected as a short peptide CH₃(NHCO-CH₂)₂ – HN–CO–(CH₂–NHCO)CH₃ the computed energy profile for the acylation step shows too high activation energy barriers. The energetics of this rate-limiting step is considerably improved, if more realistic model for the substrate is considered, following the motifs of the ThrI11–GlyI12–ProI13-–CysI14–LysI15–AlaI16–ArgI17–IleI18–IleI19 sequence of the bovine pancreatic trypsin inhibitor.     

具可调光学性质的富勒烯聚合物

聚（Ｃ６０ 甲基丙烯酸甲酯）与聚（Ｃ６０ 苯乙烯）的ＴＨＦ溶液的透射光谱随浓度的增大而不断红移．这种异常的光谱位移可能与富勒烯的纳级（１０－９）簇的形成有关．用简单的办法来“调改”一物质的性质是科学家们长期梦寐以求的，而含Ｃ６０的聚合物正代表了这一群新奇的物质，它们的光学性质可以预期地和可逆地调变，只要简单改变一下浓度．     

Aspects of thermal conductivity relative to heat flow

Summary The various techniques and methodologies of thermal conductivity measurement have been conventionally based on the determination of the rate of directional heat flow through a material having a unit temperature differential between its opposing faces. The constancy of this rate depends on the material density, its thermal resistance and the heat flow path itself. The last of these variables contributes most significantly to the true value of steady-state axial and radial heat dissipation depending on the magnitude of transient thermal diffusivity along these directions. The purpose of this paper is to exemplify the above features by defined parameters of heat flow measurement by existing methodologies. No new method is proposed here. Importantly, the relationship between the rate of heat transfer, total heat transferred and thermal conductivity at a given temperature under steady-state conditions for a fixed heat flow path will be illustrated.     

无脂链磺化酞菁铜多层膜体系：电子非弹性平均自由程的研究

磺化酞菁铜多层膜体系是利用Langmuir-Blodgett技术制备的有序有机分子膜,它对于XPS测试有很好的稳定性,本文在固定电子出射角的条件下利用XPS方法研究了不同厚度的膜样品中Cu_((2(?))_(3/2))、Ni_(1(?))、S_(2p)峰强度的变化规律,讨论了膜内分子有序排列引起的散射效应对电子平均自由程的影响。     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

电子显微技术应用于生物纳米材料表征与测试的研究进展

该文简述了电子显微技术的发展历程,并介绍了现代电子显微镜的新功能。针对生物纳米材料理化性能与功能应用的特殊性,结合研究实例,重点阐述运用电子显微结构表征与原位分析测试技术指导构建新颖纳米结构、揭示材料与细胞/组织相互作用并发挥功能的机制。并在此基础上,展望了电子显微技术在生物纳米材料研究领域的发展方向(大尺寸图像拼接、三维重构、动态原位实时成像)。     

加氢脱氮催化剂中硫化钼结构的表征

众所周知,重油加氢脱氮(HDN)所用Mo-Ni/Al2O3催化剂需经预硫化后始有显著的活性,关于硫化的条件工业上已较成熟,但在持续反应过程中硫化催化剂的结构与活性间的关系则很复杂,如硫化钼的价态和结构、金属组分和担体间的相互作用、反应条件及原料对催化剂组分的影响,以及硫化态催化剂中MoS2结晶的形貌等都可以引起催化剂活性本质的变化.     

Molecular vibrations in a gradient extremal path

Summary The calculation of vibrational states using a gradient extremal path is discussed. Gradient extremal paths are defined by local criteria, which lead to stable solutions. This has certain advantages in comparison with a steepest-descent path, which is often difficult to determine accurately. For cases where a reaction path formalism is applicable, a path based on the gradient extremal concept gives results in close agreement with those obtained using traditional steepest-descent methods. We present algorithms for carrying out such calculations and also give some numerical results.     

Variational transition state theory without the minimum-energy path

In this paper we propose a method for carrying out variational transition state theory calculations without first obtaining a converged minimum-energy path (MEP). We illustrate the method in two ways, first of all by employing an unconverged MEP and secondly by using a dynamically optimized distinguished reaction path. Preliminary tests of the algorithm for the reactions OH+H₂→H₂O+H and C₂H₅→C₂H₄+H are very encouraging. Received: 22 January 1997 / Accepted: 11 March 1997