一种电阻率测量方法

介绍了一种无接触测电阻率的实验原理．方法以及对六种硅试样的测量结果．     

国外大屏幕和平板显示的一些发展

电视技术的发展和人们视觉特性的要求,尤其是HDTV的出现,使图象显示正在向高清晰度、高亮度、大屏幕、平板化方向发展。各种各样的新型显示技术和产品正在加紧研制开发和推出,图象世界正在进入百花争妍的时代。本文拟就大屏幕和平板显示的一些国外发展情况作一介绍。     

回转体局部空泡绕流的非线性分析

基于面元法, 通过在回转体和空泡壁面放置源汇,对回转体定长局部空泡的绕流问题进行了分析和讨论,并提出了求解回转体局部空泡绕流“正问题”的方法。计算结果表明：所给出的方法具有快速收敛的特征,第1次迭代和最终收敛时空泡壁面切向速度的误差不超过5％;随着回转体面元总数N的增加,局部空泡的空泡数σ趋于稳定;通过比较可知,该方法得到的理论估算值与实测值的一致性较好。     

叠层靶板弹击实验及弹道侵彻机理的数值模拟研究

为了提高军盔等防护装备的防弹性能,采用非线性动态显式有限元分析软件ANSYS/LS DYNA5.6.1模拟了几种复合材料防弹靶板的抗弹道侵彻过程,弹头采用标准1.1g模拟弹片。结合v50弹击实验分析了靶板在此类弹击下的破坏机理和吸能方式,对靶板的选材、铺层顺序、层数和制造工艺等提出合理化建议,主要是沿靶板厚向应采用非均匀的三段式结构和工艺。     

弱粘结的斜交铺设层合圆柱壳的柱形弯曲

导出了两端简文的具有弱粘结界面的任意斜交铺设层合圆柱壳柱形弯曲问题的一个精确弹性理论解。分析中采用线性弹簧模型来表征界面的弱粘结特性。引进新的物理量改写了基本方程,导出了对应的状态空间列式,并利用变量替换技术将该状态方程转换成常系数状态方程,从而方便求解。最后给出了数值算例,并讨论了弱界面的影响。     

Chaotic Analysis of Nonlinear Viscoelastic Panel Flutter in Supersonic Flow

In this paper chaotic behavior of nonlinear viscoelastic panels in asupersonic flow is investigated. The governing equations, based on vonKàarmàn's large deflection theory of isotropic flat plates, areconsidered with viscoelastic structural damping of Kelvin's modelincluded. Quasi-steady aerodynamic panel loadings are determined usingpiston theory. The effect of constant axial loading in the panel middlesurface and static pressure differential have also been included in thegoverning equation. The panel nonlinear partial differential equation istransformed into a set of nonlinear ordinary differential equationsthrough a Galerkin approach. The resulting system of equations is solvedthrough the fourth and fifth-order Runge–Kutta–Fehlberg (RKF-45)integration method. Static (divergence) and Hopf (flutter) bifurcationboundaries are presented for various levels of viscoelastic structuraldamping. Despite the deterministic nature of the system of equations,the dynamic panel response can become random-like. Chaotic analysis isperformed using several conventional criteria. Results are indicative ofthe important influence of structural damping on the domain of chaoticregion.     

一种面板数据分位数回归模型的工具变量方法

本文将工具变量分位数回归模型(IVQR)应用到面板数据中,结合Canay对面板分位数回归的两步估计法以及Chernozhukov对IVQR模型的估计方法,提出了两步面板分位数工具变量估计法(2S-IVFEQR),并给出相应的参数估计。本文提出的方法较已有的方法计算复杂度低,蒙特卡洛模拟结果显示在数据量不大或者处理长面板数据时,2S-IVFEQR方法要优于传统的IVFEQR方法,且运算时间短。     

基于面板模型的商品房价格影响因素的实证研究

选取了我国30个省市2006~2015年的面板数据,应用面板数据计量模型回归的方法,基于R语言对影响商品房价格的因素进行实证研究.首先,经过Hausman检验与F检验确定面板数据的模型为混合估计模型;模型可以通过十折交叉验证法、残差正太性的检验、Q-Q图检验、变量间共线性的检验;最后经过逐步回归分析,结果表明土地价格、商品房销售面积、居民可支配收入、人均国内总产值财政收入占地区生产总值比重、汇率这6个指标对商品房价格都有显著性的影响.其中,土地价格和居民可支配收入对商品房价格的影响最为突出.     

Stress state of a cylindrical composite panel weakened by a circular hole

The paper studies the stress-strain state of a deep cylindrical panel weakened by a hole and subjected to a tensile load at the outer boundary. A variational difference method is used. A numerical analysis is carried out for an orthotropic panel with low shear stiffness __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 5, pp. 73–78, May 2006.     

Deteriorated Geometrical Stiffness for Higher Order Finite Elements with Application to Panel Flutter

Higher order elements were first design for linear problems where, in certain situations, they present advantages over the lower order elements. A method to efficiently extend their use to geometrical nonlinear problems as panel flutter and postbuckling behavior is presented. The chaotic and limit-cycle oscillations of an isotropic plate are obtained based on direct integration of the discretized equation of motion. The plate is modeled using the von Karman theory and the geometrical nonlinearities are separated in a nonlinear term of the first kind which manifests especially in the prebuckling and buckling regimes, and a nonlinear term of the second kind which is responsible for the postbuckling behavior. A fifth order, fully compatible element has been used to model thin plates while the inplane loads where introduced through a membrane element. The aerodynamics was modeled using the first order 'piston theory. The method introduces the concept of a deteriorated form of the second geometric matrix which is equivalent to neglecting higher order terms in the strain energy of the plate. This allows for a drastic reduction in the computational effort with no observable loss of accuracy. Well established results in the literature are used to validate the method.