Further application of the diazotizationcoupling spectrophotometric technique to the determination of aromatic amines with 8-amino-1 -hydroxynaphthalene-3,6-disulphonic acid and N-(1-naphthyl)-ethylenediamine as coupling agents

Twenty-two aromatic amines are determined by the diazotization-coupling spectrophotometric technique, using 8-amino-1-hydroxynaphthalene-3,6-disulphonic acid (H-acid) and N-(1-naphthyl) ethylenediamine (N-na) as coupling agents. The following are determined by both methods: 2-and 4-ethylaniline, 4-aminobenzonitrile, 3- and 4-aminoacetophenone, 4-aminobenzophenone, 4-iodoaniline, 2,5-dichloroaniline, 4-aminohippuric acid, 2-aminobenzyl alcohol, 3-aminobenzamide, sulphathiazole, 2-, 3- and 4-methoxyaniline and 2,4-, 3,4- and 3,5-dimethylaniline. It is possible to determine 2,3- and 2,5-dimethylaniline only by the H-acid method, but 2,6-dimethylaniline cannot be determined by either method. 2-Aminobenzamide can only be determined by the N-na method. In the application of the H-acid method to the methoxyanilines and dimethylanilines, the colour is developed by adding a large excess of sodium bicarbonate and H-acid. In the application of the N-na method to the ethylanilines, methoxyanilines and 2,4-, 3,4- and 3,5-dimethylanilines, the colour is developed by addition of a large excess of N-na reagent and allowing the solution to stand overnight.     

Synthesis of cyclic hydrocarbons via intramolecular coupling of bis-pentadienyl iron tricarbonyl cations

A general synthesis for the preparation of medium sized cycloalkanes having 1,2-butadienyl substituents is described. The reaction sequence involved acylation of butadiene-iron tricarbonyl with a diacid chloride, reduction of the resultant diketone to a diol derivative and conversion with HBF₄ to an acyclic bis-pentadienyl Fe(C0)₃ dicationic complex. Upon treatment with zinc the dication undergoes intramolecular ring closure to afford the bis-Fe(C0)₃ complex of the 1,2-dibutadienyl cycloalkane. Five-, six- and ten-membered cyclolalkene derivatives have been prepared in this manner.     

Primary methods of measurement in chemical analysis

 Primary methods of measurement have a central function in metrology. They are an essential component in the realisation of the SI units and therefore are indispensable for establishing traceability of measurements of all kinds of physical quantities to the corresponding SI units. This is also true for chemical analysis. Gravimetry, titrimetry, coulometry, and isotope dilution mass spectrometry (IDMS) are evaluated with regard to their potential to be primary methods according to a general definition of primary methods recently given by the Comité Consultatif pour la Quantité de Matière (CCQM). Optical absorption spectrometry and methods based on colligative properties are also considered. A general scheme for establishing traceability of chemical measurements to the SI units using primary methods is discussed. Received: 17 April 1997 · Accepted: 9 August 1997     

Iron-57 Mössbauer effect study of the distribution of divalent and trivalent ions in potassium transition metal fluorides having the tetragonal bronze structure

Mössbauer studies are reported for compounds of the type KM^IIM^IIIF₆ (M = first-row transition metal ion, Zn, or Mg) which have the tetragonal bronze structure. The results of this investigation provide evidence that the trivalent ions are located on the 8(j) sites of the bronze structure and that the divalent ions are distributed over both the 8(j) and 2(c) sites.     

Easy α- to β-migration of an enol moiety on a pyrrole ring

Functionalized pyrrolic enols, 2-(2,2-dicyano-1-hydroxyethenyl)-1-methylpyrroles, synthesized from 2-ethenylpyrroles by a nucleophilic SEt-OH exchange, upon heating (75-142 °C) are readily rearranged to their 3-isomers in near to quantitative yield. The inter or intramolecular auto-protonation of a pyrrole ring by the acidic enol hydroxyl to form a mesomeric pyrrolium cation or zwitterion is suggested to be a key step in the rearrangement.     

Reaction of η5-cyclopentadienylbis(triphenylphosphine)cobalt(I) with alkadiynes. Preparation and reactions of bicyclic cobalt metallocycles and a stable trimethylsilyl-substituted mono-complexed alkadiyne. Comments on the mechanism of cobalt-catalyzed alkyne cooligomerization

Reactions of η⁵-cyclopentadienylbis(triphenylphosphine)cobalt(I) (5) with several 2,n-alkadiynes (2) were investigated. Each of these reactions leads initially to a material in which one of the acetylene functional groups is π-coordinated to cobalt; this complex then undergoes conversion to a metallocycle. In cases where the two acetylene functions are connected by three- and four-carbon bridges (2b, 2c), metallocycles formed by intramolecular reaction of two acetylene functions in the same molecule may be isolated. In cases where the acetylene functions are joined by larger or smaller bridges, the reactions are more complex, and both inter- and intramolecular metallocycles are formed. Reactions of 5 with 1,8-bis(trimethylsilyl)-1,7-octadiyne (16) gives an isolable crystalline mono-acetylene complex (17), this material is stable in the solid state but undergoes conversion to metallocycle (18) in benzene solution. The relationship of these results to the mechanism of the CpCo(CO)₂-catalyzed benzocycloalkene synthesis is discussed; it is suggested that intramolecular metallocycles are intermediates in reactions leading to benzocyclopentanes and -cyclohexenes, but intermolecular metallocycles are probably involved in reactions leading to benzocyclobutenes.     

Spectrophotometric determination of phosphate by extraction of reduced molybdoantimonylphosphoric acid with acetophenone-chloroform

A 90% ($\text{v}\text{v}$) mixture of acetophenone-chloroform is an effective extractant for reduced molybdoantimonylphosphoric acid. The extraction is quantitative over the acidity range of 0.04 to 4.8 N sulfuric acid. The mixed solvent extractant is virtually immiscible with water and can be used at aqueous/organic volume ratios from 1:1 to 40:1 with no loss of solvent or decrease in % extraction. Phosphate is easily determined from 5 to 1000 ppb. No interference from silicate was experienced.     

Selectivities in 1,2,3-triazolide displacements of halides and additions to alkynes

4,5-Dicarbomethoxy-1,2,3-triazolide or 4-phenyl-1,2,3-triazolide displace chloride from ethyl chloroacetate or β-chloropropionate to give both 1-N and 2-N alkylated products. Our highest 2-N to 1-N selectivity was ca 5/1 and was found with the base triethylamine in DMF. The same triazolides and others add to alkynes, e.g. ethyl propiolate, methyl acetylenedicarboxylate, phenylpropiolaldehyde, ethyl phenylpropiolate, etc, to give Michael adducts at the 2-N position exclusively. Here the usual preference holds, i.e., the anti adduct is favored, but anti to syn isomerization usually sets in. On the basis of the available data for nucleophilic substitutions and additions, a limited directioselectivity pattern emerges for H-1,2,3-triazoles (T) and their anions (T^?): neutral T almost invariably leads with 1-N; T^t-- usually adds to unsaturates at 2-N; unsubstituted, 4-substituted and 4,5-disubstituted T^? attack organic halides at both 1-N and 2-N. Compared to phenyl, 2-triazolyl exerts a greater deshielding effect on proton chemical shifts; these and other patterns in the PMR spectra of the Michael adducts are discussed. CNDO calculations indicate that the 1-H is more stable than the 2-H-1,2,3-triazole and that in both neutral triazole and in triazolide, the 1-nitrogen position should lead nucleophilic attacks-this directioselectivity prediction is only partly (and probably fortuitously) correct.     

Preparative uv-laser photochemistry of the azoalkane spiro(2,3-diazabicyclo [2.2.1]hept-2-ene-7′,1-cyclopropane): Trapping of the 1,4-Diradical 2-(3-Cyclopentenyl) ethyl by Molecular Oxygen

Photo-extrusion of nitrogen from the azoalkane 1 in the presence of molecular oxygen gave besides the hydrocarbons 3 and 5, the endoperoxide 10 and hydroperoxide 11, the former via trapping of the 1,4-diradical 4 by triplet oxygen, the latter by ene-reaction-6f hydrocarbon 5 with singlet oxygen.     

A 19F NMR study of the transmission of electronic effects in triarylantimony and triarylbismuth compounds. A comparison with the nitrogen- and carbon-containing analogues

A ¹⁹F NMR study of the transmission of electronic effects has been made for the systems Ar₂EC₆H₄F-4 (E = Sb, Bi, CH, N). The fluorine chemical shifts obtained are correlated with the polar constants (Σσ^o and Σσ) of the substituents, suggesting that electronic effects are transmitted through the SbC_ar, BiC_ar and CC_ar bonds predominantly by an inductive mechanism, whereas the transmission through the NC_ar bonds is contributed to significantly by classical resonance effects due to competitive conjugation of the lone pair with the aromatic rings, and the substituents therein. A dual parameter correlation of the fluorine chemical shifts with the inductive (σ_I) and resonance (σ^o_R and σ_R) parameters of the substituents in the aromatic rings has led to similar conclusions. The inductive transmission through the bridging Sb and Bi atoms has been assigned to the absence of conjugation of lone pair and vacant d-orbitals of the metals with π-electron systems of the aromatic rings. On the basis of the values of the ? coefficients for the correlation equations obtained it has been established that the transmitting ability of the BiC_ar bonds is close to that of the C_alC_ar bonds and considerably lower than the transmitting ability of the NC_ar bonds.