重复控制技术在三相电压型PWM变流器中的应用

矢量控制用于三相电压型PWM变流器时,能够使系统得到较好的动静态特性,但当直流侧接入非阻性负载时,直流侧电压会出现较大纹波,造成输入电流THD值增大。利用重复控制的特点,提出了一种基于矢量控制和重复控制结合的控制方法,实验结果表明,该方法有效的降低了三相电压型PWM变流器输入电流的THD值,使系统达到了更好的性能。     

油-气-水三相流超声传感器持气率测量

为探索油-气-水三相流持气率测量难题,该文开展了脉冲透射式超声传感器持气率测量动态实验研究。首先,利用超声传感器与光纤传感器组合,测取了油-气-水三相流中段塞流、混状流、泡状流的响应信号;其次,提取了超声脉冲信号的最大值序列来反映不同流型时超声传感器响应特性,同时,借助双头光纤传感器与相关测速法,计算得到了流体中气泡弦长序列;最后,结合流型与泡径信息,利用超声传感器测量了不同流型下持气率,并分析了不同流型持气率预测的误差来源,为其他油-气-水三相流持气率测量传感器设计提供了借鉴。     

三相中空纤维液相微萃取在羟基苯甲酸类化合物分析中的应用

在优化的三相中空纤维液相微萃取(3p-HFLPME)条件下,研究了6种羟基苯甲酸类化合物(HBAs)的3p-HFLPME行为;揭示了HBAs的富集因子(EF)与其正庚醇/水条件分配系数(log Pn-heptanol/5 mmol/L HCl)、pKa和羟基数目(N)的相关性,初步阐明了聚偏氟乙烯中空纤维对HBAs的电荷转移传递机理以及有机溶剂对HBAs的选择性萃取机理。优化的3p-HFLPME条件: 以MOF 503聚偏氟乙烯中空纤维为有机溶剂支持体,正庚醇为有机相,5 mmol/L HCl体系为给体,80 mmol/L NH3·H2O为接受相,搅拌速度为1200 r/min,萃取35 min。该方法的精密度（以相对标准偏差计）小于3%,检出限为0.09~30.00 μg/L,加标回收率为93.3%~107.1%,HBAs质量浓度为5 mg/L时的富集因子最高达107.6倍。     

On the effects of a spacecraft subcarrier unbalanced modulator

This paper presents mathematical models with associated analysis of the deleterious effects which a spacecraft's subcarrier unbalanced modulator has on the performance of a phase-modulated residual carrier communications link. The undesired spectral components produced by the phase and amplitude imbalances in the subcarrier modulator can cause (1) potential interference to the carrier tracking and (2) degradation in the telemetry bit signal-to-noise ratio (SNR). A suitable model for the unbalanced modulator is developed and the threshold levels of undesired components that fall into the carrier tracking loop are determined. The distribution of the carrier phase error caused by the additive White Gaussian noise (AWGN) and undesired component at the residual RF carrier is derived for the limiting cases. Further, this paper analyses the telemetry bit signal-to-noise ratio degradations due to undesirable spectral components as well as the carrier tracking phase error induced by phase and amplitude imbalances. Numerical results which indicate the sensitivity of the carrier tracking loop and the telemetry symbol-error rate (SER) to various parameters of the models are also provided as a tool in the design of the subcarrier balanced modulator.     

Sonochemically synthesized core-shell structured Au–Pd nanoparticles supported on γ-Fe2O3 particles

A sample of Au–Pd bimetallic nanoparticles supported on γ-Fe₂O₃ was synthesized in a sonochemically one-pot process. The structural analyses of the synthesized sample were performed by the techniques of X-ray Absorption Fine Structure (XAFS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and UV–vis spectrometry. Results indicated that the synthesized sample formed a core-shell structure in which a gold core was surrounded by a thin palladium shell. The reaction rate constant for the hydrogenation of cyclohexene of the present sample showed higher value than that of Pd nanoparticles supported on γ-Fe₂O₃ and core-shell structured Au–Pd nanoparticles supported on SiO₂. The present sample is a promising catalyst material which has a high catalytic activity.     

三相恒压恒频逆变电源的输出波形重复控制技术

对瞬时控制和重复控制的内模原理进行了分析，提出了基波扰动瞬时反馈控制内模与谐波重复控制内模相结合的控制器。仿真和实验验证了该方案可以保证系统有较快的动态响应，稳压精度高，输出电压谐波畸变率小。     

三相系统部分结晶聚合物结构参数小角X射线散射分析

使用小角X射线散射技术分析了部分结晶聚合物结构参数,结晶度和片层厚度与两相系统中的结果不一致,对一些部分结晶聚合物样品的分析表明它们的Bragg长周期接近相关函数长周期与过渡层厚度的和,这个结论也与部分结晶聚合物存在中间过渡层一致.     

Selective hydrogenation of styrene/1-octene mixtures over a monolithic Pd catalyst

Mixtures of styrene and 1-octene in toluene were hydrogenated over a monolithic Pd catalyst in the three-phase regime. Styrene was preferably hydrogenated to ethylbenzene, while a major part of the initial quantity of 1-octene was isomerized to internal olefins. Formation of alkylcyclohexanes was negligible. Observed rates of styrene hydrogenation were high compared to the values listed in literature.     

A 100-kW three-phase AC plasma furnace for spheroidization of aluminum silicate particles

A 100-kW three-phase ac plasma furnace with sheathed copper electrodes (sheathing gas: air) is presented. It is used for spheroidizing chamotte (refractory-fired clay) particles having a smooth, pore-free surface. A simple, one-dimensional numerical model for the heat transfer to the particles explains the maximum processing rate and the detrimental influence of an inhomogeneous particle size distribution.