非对称量子阱中非线性光学吸收系数的计算

非对称量子阱中的非线性光学效应因其潜在的实用价值而引起人们的广泛关注,而量子阱内带间的光学吸收问题对研究远红外光学探测器件具有重要的理论指导意义.以Pschl-Teller势阱为例研究了影响非对称量子阱中的非线性光学吸收系数的因素.考虑到带间的电子弛豫,用量子力学中的密度矩阵算符理论导出了Pschl-Teller势阱中的线性与三阶非线性光学吸收系数的表达式.因该势阱中有两个可调参数,通过调节系统的参数,发现该系统的非线性光学吸收系数呈规律性的变化.以典型的GaAs/AlGaAs非对称量子阱为例作了数值计算,通过调节系统的参数,数值计算结果表明,入射光强以及系统的非对称性对量子阱的非线性光学吸收系数有较大的影响,从而为实验上研究非对称量子阱的非线性光学效应提供了必要的理论依据.     

Mo/MCM-22分子筛碳化钼活性中心结构及甲烷活化机理的密度泛函理论研究

 应用密度泛函理论研究了Mo/MCM-22分子筛上碳化钼活性中心的几何结构和电子结构,以及甲烷在该活性中心上的活化机理. 设计了两种结构的活性中心模型: Mo(CH2)2(模型A)和Mo(CH)CH2(模型B); 它们都嫁接在MCM-22分子筛超笼边缘的T4位的Brnsted-酸性位上,用3T簇模型代替分子筛的骨架,对所设计的模型进行了几何结构优化和电子结构分析. 结构优化结果显示, Mo与CH2端基以双键结合,键长为0.18～0.19 nm, 而Mo与CH端基以叁键结合,键长为0.17 nm. 通过自然键轨道分析,证明中心钼原子以配位键与骨架氧原子结合. 根据前线分子轨道的分析,预测了甲烷活化反应将发生在甲烷分子的HOMO和钼活性中心的LUMO之间,即 C-H 键的电子流向 Mo-C 键的π*轨道. 甲烷 C-H 键发生异裂, H+和H3C-基团分别与 Mo-C 键上的Mo和C成键. 在模型A上,甲烷活化反应的活化能为119.97 kJ/mol; 在模型B上,甲烷的H原子可以分别结合到CH2端基和CH端基上,对应的活化能分别为91.37和79.07 kJ/mol.     

TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

On the influence of structural features of DNA on the possibility of metabolic transfer of electrons

Abstract

A fragment of a DNA molecule is considered as one of the channels of metabolic electron transfer. The heterogeneity of the complementary chains is effectively taken into account. This made it possible to find the speed of the electron injected into the DNA conduction band and the current density that it creates. Estimates of electron mobility in nucleic acid chains are made. They were an order of magnitude smaller than that of typical semiconductors. For the specific conductivity of nucleic acid chains, estimates provide a conductivity of one to two orders of magnitude lower than in graphite.     

Statistical structure of the velocity field in cavitating flow around a 2D hydrofoil

Transformation of flow turbulence structure with cavitation occurrence, determination of the flow conditions favorable for nucleation of cavitation bubbles, influence of the statistical structure of turbulence on this process and the inverse effect of cavitation on the flow dynamics are challenging problems in modern fluid mechanics. The paper reports on the results of statistical processing of the velocity fields measured by a PIV technique in cavitating flow over a 2D symmetric hydrofoil for four flow conditions, starting from a cavitation-free regime and finishing by unsteady cloud cavitation. We analyze basic information on the statistical structure of velocity fluctuations in the form of histograms and Q-Q diagrams along with profiles of the mean velocity and turbulent kinetic energy. The research reveals that the flow turbulence pattern and distributions of turbulent fluctuations change significantly with the cavitation development. Under unsteady cloud cavitation conditions, the probability density function of the fluctuating velocity has a two-mode distribution, which indicates switching of two alternating flow conditions in a region above the hydrofoil aft part due to periodic passing of cavitation clouds. Behaviors of the mean and most probable velocities unexpectedly appear to be different with a monotonous increase of the incoming flow velocity. This finding must be caused by modification of the skewness coefficient of the fluctuating velocity.     

基于三维接触有限元分析的管片等效抗弯刚度和错台研究

针对盾构隧道管片接头等效抗弯刚度预测研究中,对梁-弹簧与三维模型整体等效性考虑的不充分,以三维接触有限元计算结果作为测量信息,借助基于挠度等效的反问题求解,提出了一种确定管片接头等效抗弯刚度的新方法;并利用不同轴力-偏心距组合下的反演结果,建立了基于Kriging代理模型的轴力-弯矩-等效抗弯刚度的非线性关系,提出了由此关联的管片结构非线性问题的数值求解方法。与三维有限元结果相比,所提方法可较为准确地预测管片结构的内力和变形,表现出良好的整体等效性。此外,借助三维接触有限元分析,进一步深入探讨了螺栓孔间隙与衬垫本构关系对管片纵向错台量的影响。     

Highly efficient perovskite solar cells by tuning electronic structures of thienothiophene-based as hole transport materials

The atomic substitutions were used to study the hole transport materials (HTM) properties of six thiophenothiophene molecules (HTM1-HTM6) to reveal the relationship between their core structures and photoelectric properties. To better investigate the difference between experimentally original and designed molecules, we calculated the hole mobility and some parameters (such as energy levels, stability, and optical properties, etc). The results showed that the molecular orbital levels of the original and designed molecules have well matched with perovskite and Ag electrode to ensure hole transport and inhibit the electron reflux. Among the designed HTMs, HTM5 has the smallest energy gap that results in the red-shifted absorption spectra. Furthermore, there is an obviously increased charge transfer integral V due to the introduction of the Si atom, which greatly improved the hole mobility. Therefore, atom substitution by introducing Si atoms (HTM5) will improve the energy levels and charge transport ability, and molecular design by means of atom substitution can be a potential way to tunable HTM performance in solar cells.     

A giant enhancement of magnetic moment in a ternary three-shell icosahedral cluster: Fe@Mn12@Au20

ABSTRACT

The average magnetic moment per atom of Mn₁₃ cluster is expected to be enhanced by doping or coating with a shell. Several ternary core–shell icosahedral clusters TM@Mn₁₂@Au₂₀ were constructed by combining substituting the central Mn with VIII elements (Fe, Co, Ni, Ru, Rh, Pd and Pt) and coating with a icosahedral Au₂₀ shell, and systematically studied by using the first-principles density functional method. Compared to Mn₁₃, Fe@Mn₁₂@Au₂₀ cluster shows a giant enhancement on total magnetic moment (52?µ_B) which can be greatly attributed to the ferromagnetic coupling between spin moments of atoms. Coating with Au₂₀ shell enlarged the average distances of TM-Mn and Mn-Mn and is a useful way to change the magnetic coupling style. By analysis of density of states and electron localisation functional, we can conclude that the weak hybridisation between Fe and Mn in Fe@Mn₁₂@Au₂₀ is propitious to maintain their original direction of spin moments of atoms and then form ferromagnetic coupling.