Tunable optomechanically induced transparency and fast–slow light in a loop-coupled optomechanical system

We theoretically explore the tunability of optomechanically induced transparency(OMIT) phenomenon and fast–slow light effect in a loop-coupled hybrid optomechanical system in which two optical modes are coupled to a common mechanical mode. In the probe output spectrum, we find that the interference phenomena OMIT caused by the optomechanical interactions and the normal mode splitting(NMS) induced by the strong tunnel coupling between the cavities can be observed. We further observe that the tunnel interaction will affect the distance and the heights of the sideband absorption peaks. The results also show that the switch from absorption to amplification can be realized by tuning the driving strength because of the existence of stability condition. Except from modulating the tunnel interaction, the conversion between slow light and fast light also can be achieved by adjusting the optomechanical interaction in the output field. This study may provide a potential application in the fields of high precision measurement and quantum information processing.     

Mechanical Behavior of Bulk Poly(Ethylene Terephthalate) Subjected to Simple Shear

Abstract

Mechanical behavior of bulk semicrystalline poly(ethylene terephthalate) (PET) processed through simple shear is investigated. The equal channel angular extrusion (ECAE) process was used to achieve the simple shear condition. The PET samples were processed in one and two ECAE passes in the same direction, with the sample rotated 180° about the extrusion axis for the second pass. Microstructural features at the nanometer and micrometer scales were studied by small‐angle x‐ray scattering (SAXS) and scanning electron microscopy (SEM). SAXS results showed that at the nanometer scale, two types of lamellar orientations are induced in both samples, but with different extents of orientation. In the ECAE‐oriented PET structures on the micrometer scale, as revealed by SEM, are well‐defined macrofibrils. However, the fibrillar structures in the sample extruded once are more oriented than those in the sample extruded twice. Fractography investigations suggest that the ECAE‐induced fibrillar structure and stretched amorphous chains are responsible for the change in mechanical properties.     

流场环境下复杂囊泡的动力学行为

采用非平衡态分子动力学方法研究了二维复杂囊泡在剪切流中的动力学行为. 模拟发现了复杂囊泡经典的翻滚(tumbling)、摇摆(trembling)和坦克履(tank-treading)行为, 还观察到由坦克履行为向平动行为(translating)的转变. 囊泡的平动行为与剪切率大小、复杂囊泡的形状密切相关. 当大囊泡均匀嫁接较多数目的小囊泡后, 其平动方式消失. 该研究有益于加深对囊泡在剪切流场中复杂性行为的理解.     

夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

惯性约束聚变频率转换系统中,大口径薄型KDP晶体的面形质量是影响频率转换效率能否达到设计要求的关键因素之一。针对45放置状态下口径为400 mm400 mm的三倍频KDP晶体,采用ANSYS有限元分析软件,建立了不同夹持方式和具有不同加工误差的KDP晶体模型和夹具模型,分析了加工误差对不同夹持方式下KDP晶体附加面形的影响,给出了不同加工误差和不同夹持情况下,KDP晶体附加面形的P-V值和RMS值。研究结果表明,夹持方式和加工误差是引起KDP晶体附加面形变化的重要因素,正面压条夹持方式即使在晶体和夹具存在加工误差时也可以较好地控制晶体的附加面形。     

利用GM(1,1)模型预测曲线波形

针对给出的函数y=f(x),x∈[a,b],将其值域进行n等分,设yi为其中任一分点,对应x=xi(i=1,2,…,m),用GM(1,1)模型对序列{x1,x2,…,xm}进行预测,得到曲线y=f(x)在下一段时间与直线y=yi的交点位置.当GM(1,1)模型的误差较大时,可利用带有残差修正的GM(1,1)模型进行残差修正,以提高GM(1,1)模型预测值的精确度.     

Optical Fiber Excitation of Fano Resonances in a Silicon Microsphere

In this article, Fano lineshape whispering gallery modes were observed in the light scattering spectrum of a silicon microsphere in near-infrared telecommunication wavelengths. A simple model is presented to explain the transition from Lorentzian lineshape to the Fano lineshape resonances with the coupled-mode theory of multiple whispering gallery modes. Polar mode spacing of 0.23 nm is observed in the spectra, which correlates well with the calculated value. The quality factor of the Lorentzian and Fano resonances are on the order of 10⁵. By using an appropriate interface design for the microsphere coupling geometries, Fano lineshape optical resonances herald novel device applications for silicon volumetric lightwave circuits.     

金属纳米结构对光谱响应及折射率灵敏度的影响

推导了任意形状金属纳米结构对复杂环境折射率的局域表面等离子体共振(LSPR)光谱响应的解析解,给出了体折射率和局部折射率灵敏度公式,并进行了详细的理论分析和数值验证。结果表明,金属纳米结构的光谱响应与被分析物厚度呈指数增长关系,并与被分析物的折射率、敏感层厚度、金属纳米结构的材料和形状等因素有关。被分析物折射率越高,光谱响应越大。敏感层越厚,局部折射率灵敏度越差。同时,尖锐的金属纳米结构形状可以获得更大的体折射率灵敏度。对金属纳米结构光谱响应及折射率灵敏度的研究对制作高灵敏度LSPR传感器具有重要的指导意义。     

制备软X光多层膜的转速控厚法

本文提出了一种新的监控软X光多层膜膜厚的方法——转速控厚法,利用这种方法镀制的设计周期厚度分别为8.4和10nm,周期数达50对和30对的W/C多层膜,经小角X光衍射测试,结果表明周期厚度随机误差在0.1nm左右。     

Fast response in TN liquid-crystal cells: effect of functionalised carbon nanotubes

The optical response time of a nematic liquid crystal (NLC) decreases due to incorporation of carbon nanotubes (CNTs) in the liquid-crystal host. Such reduction is believed to be due to an increase in the elastic constant of the nanotube-doped LC system. In this paper, we present the effect on optical response due to doping an NLC with octadecylamine functionalised single-walled carbon nanotubes (ODA-SWCNT) in a twisted alignment mode. The electro-optic switching amplitude of ODA-SWCNT nanocomposites of NLC decreases compared to pure NLC. A fast response time is observed with an increase in the concentration of ODA-SWCNT in NLC host. Additionally, optical response of pure NLC in a twisted nematic (TN) cell fabricated using mixtures of polyimide (PI) and ODA-SWCNT as an alignment layer is investigated. The optical response time decreased by ~75% in a TN cell fabricated with a mixture of PI and ODA-SWCNT compared to that of a TN cell prepared using a pure PI alignment layer. The presence of ODA-SWCNT in the alignment layer enhances the surface anchoring of the NLC molecules leading to an increase in the elastic constant and a decrease in the optical response time of NLC.