聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.     

电感耦合等离子体原子发射光谱法测定镍基单晶高温合金中Mo、W、Ta、Re、Ru时元素之间相互干扰的消除与校正的研究

称取镍基单晶高温合金0.100 0g于聚四氟乙烯烧杯中,先令其与盐酸9mL和硝酸1mL加热反应,待反应缓慢时滴加氢氟酸2mL并继续加热使样品完全溶解。加入500g·L^-1酒石酸溶液2mL,冷却至室温,在塑料容量瓶中加水定容至100.0mL。按仪器工作条件采用电感耦合等离子体原子发射光谱法测定其中5种合金元素(Mo、W、Ta、Re、Ru)的含量,选择分析谱线依次为204.598,207.911,240.063,197.312,240.272nm。结果发现:除了Re外,其余4种元素的测定中均受共存元素的光谱干扰,严重影响了测定结果的准确性。为克服其干扰,除了采用基体匹配法消除镍的基体干扰外,试验采用混合校正系数矩阵法对测定结果进行校准。通过一系列试验计算得到混合校准系数矩阵K,并应用于模拟样品的分析。结果表明:经过矩阵K的校准,所测定的5种元素的准确度显著提高,达到了消除共存元素之间光谱干扰的目的。通过精密度试验,测得上述5种元素测定值的相对标准偏差(n=11)均在1.5%以下,并通过标准加入法进行回收试验,测得5种元素的回收率为97.0%~105%。     

Antistatic applications of conducting polyaniline

A method is described to impart flexibility and mechanical strength to conducting polyaniline by polymerizing aniline on fabrics and on cellulose papers. The study indicates that these conducting fabrics offer 16–18 dB of shielding effectiveness for the control of electromagnetic interference (EMI) up to a frequency of 10³ MHz.     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.     

显微共焦拉曼光谱研究电化学合成聚苯胺膜

显微共焦拉曼技术被用来研究电化学合成的聚苯胺（PANI）膜. 研究结果表明：在不同的激发光聚焦深度，聚苯胺膜的拉曼光谱有明显变化.从而反映出聚苯胺膜的掺杂程度在膜生长过程中随膜厚度的增长而增加. 并由X射线电子能谱（XPS）和紫外吸收光谱（UV）分析证实.     

Hydrodynamic thickness and deformational properties of adsorption layers of poly(ethyleneoxides)

From the measurements of surface potentials of quartz capillaries before and after adsorption of poly(ethylene oxides) (PEO) of various molecular mass, an assessment of the equilibrium hydrodynamic thickness of the adsorption layers has been obtained. The results have been compared with those of independent measurements of . The flow of the polymer solution under increasing pressure drops at the ends of a capillary, which causes the corresponding shear stress () on the surface of adsorbed PEO layers, results in the deformation of the latter, which manifests itself in decreasing 5. The values decrease by several times when the shear stress rises to 2×10₂ N m^–2. Such values of have been obtained using thin capillaries (r = 5÷6 mm) and by application of the capillary electrokinetic method with pressure drops up to 5÷6 MPa.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 31–37, January, 1994.     

一种基于SPWVD-WVD的高质量时频分析方法及ISAR成像应用

交叉项干扰抑制与高时频聚集度是准确反应信号的时频分布特征的重要因素。传统的魏格纳-维尔分布(Wigner-Ville Distribution,WVD)算法虽能获得较高的时频分辨特征,但分析多成分信号时存在严重的交叉项干扰问题,限制了其实用性;而平滑伪魏格纳-维尔分布(Smoothed Pseudo Wigner-Ville Distribution,SPWVD)算法虽在一定程度上抑制交叉项干扰,但降低了时频聚集度。为了解决上述问题,提出了基于SPWVD-WVD的时频分析方法。该方法利用SPWVD与WVD之间的滤波互消效应,将SPWVD二值化结果与WVD结果进行矩阵运算,最终得到高质量的时频分析结果。实验结果表明,所提出的算法能够有效去除多分量信号的交叉项干扰,提高信号分析结果的时频聚集度,还原多分量信号的真实时频分布。最后将该算法成功应用于逆合成孔径雷达成像中。     

基于误码率的软件无线电射频干扰效应分析

针对通信系统工作过程中受到外界电磁干扰而无法通信的问题,研究了基于软件无线电的电磁干扰效应及误码特征。通过分析典型软件无线电电磁信号传输特性及其信息链路电磁干扰耦合路径,设计了软件无线电通信干扰实验系统。该系统利用Simulink软件观测、记录通信信号眼图、星座图信息等受扰特征,并通过分析接收信号的误码率,给出了不同干扰信号对通信系统的影响规律：当同频干扰功率达到-40 dBm时通信开始出现误码,干扰功率每增加5 dB,误码率增加一个量级,干扰功率增加到-18 dBm时,误码率达到阈值0.25;邻频干扰误码率随干扰功率变化趋势与同频干扰一致,但出现误码的最小干扰功率更大;带外强干扰信号也会影响通信系统可靠性,在相同误码率情况下,需要更大的干扰信号功率且大小与信号频偏成正比。     

Hyperelastic,Robust, Fire-Safe Multifunctional MXene Aerogels with Unprecedented Electromagnetic Interference Shielding Efficiency

MXene aerogels have shown great potential for many important functional applications, in particular electromagnetic interference (EMI) shielding. However, it has been a grand challenge to create mechanically hyperelastic, air-stable, and durable MXene aerogels for enabling effective EMI protection at low concentrations due to the difficulties in achieving tailorable porous structures, excellent mechanical elasticity, and desired antioxidation capabilities of MXene in air. Here, a facile strategy for fabricating MXene composite aerogels by co-assembling MXene and cellulose nanofibers during freeze-drying followed by surface encapsulation with fire-retardant thermoplastic polyurethane (TPU) is reported. Because of the maximum utilization of pore structures of MXene, and conductive loss enhanced by multiple internal reflections, as-prepared aerogel with 3.14 wt% of MXene exhibits an exceptionally high EMI shielding effectiveness of 93.5 dB, and an ultra-high MXene utilization efficiency of 2977.71 dB g g⁻¹, tripling the values in previous works. Owing to the presence of multiple hydrogen bonding and the TPU elastomer, the aerogel exhibits a hyperelastic feature with additional strength, excellent stability, superior durability, and high fire safety. This study provides a facile strategy for creating multifunctional aerogels with great potential for applications in EMI protection, wearable devices, thermal management, pressure sensing, and intelligent fire monitoring.