Lanthanum nitrate decomposition by both temperature programmed heating and citrate gel combustion

Thermal decomposition of lanthanum nitrate to lanthanum oxide was carried out by both temperature programmed heating (TPH) and citrate-gel combustion. The temperature programmed heating was carried out under flow of oxidizing (air), neutral (nitrogen) and reducing (25 vol.% hydrogen+argone mixture) gases, and the processes were controlled by simultaneous thermogravimetry and differential thermal analysis. It was shown that hydrogen atmosphere helps to reduce temperatures of all decomposition steps. The results of TPH were utilized to check the nature of residues in the products of lanthanum nitrate-to-oxide conversion performed via citrate-gel combustion technique.     

Photoemission study of the modification of the electronic structure of transition-metal overlayers on TiO2 surfaces II. Cr on TiO2(0 0 1)

The electronic states of the Cr overlayers on TiO₂(0 0 1) surfaces have been investigated using angle-resolved and resonant photoemission spectroscopy with synchrotron radiation. At lower coverages, Cr deposition on TiO₂(0 0 1) creates two well separated in-gap emissions due to the formation of surface Ti³⁺ (3d¹) ions and Cr³⁺ (3d³) ions. At higher coverages, the in-gap emission is developed into the 2-peak-structure emission of Cr 3d character. The corresponding state is considered to be of metallic nature from the viewpoint of the high ability of oxygen adsorption, but has no Fermi edge, indicating a possibility of forming small Cr clusters on TiO₂(0 0 1) at this stage.     

BEPCⅡ束流相关本底的蒙特卡罗模拟研究(Ⅱ)—束流-气体相互作用

介绍了用蒙特卡罗方法研究正常对撞模式下束流本底中的束流-气体相互作用的原理与效果.使用通用的模拟工具,研究了BEPCⅡ的束流-气体本底对设计中的BESⅢ的影响.结果显示,在储存环上设置挡板后,探测器的本底在允许的范围之内.模拟结果对BEPCⅡ-BESⅢ的设计建造具有指导意义.     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

Molecular flow and wall collision age distributions

The use of storage cells has become a standard technique for internal gas targets in conjunction with high energy storage rings. In case of spin-polarized hydrogen and deuterium gas targets the interaction of the injected atoms with the walls of the storage cell can lead to depolarization and recombination. Thus the number of wall collisions of the atoms in the target gas is important for modeling the processes of spin relaxation and recombination. It is shown in this article that the diffusion process of rarefied gases in long tubes or storage cells can be described with the help of the one-dimensional diffusion equation. Mathematical methods are presented that allow one to calculate collision age distributions (CAD) and their moments analytically. These methods provide a better understanding of the different aspects of diffusion than Monte Carlo calculations. Additionally it is shown that measurements of the atomic density or polarization of a gas sample taken from the center of the tube allow one to determine the possible range of the corresponding density weighted average values along the tube. The calculations are applied to the storage cell geometry of the HERMES internal polarized hydrogen and deuterium gas target. Received 9 July 2001 and Received in final form 18 September 2001     

复合多层介质在可变温度和集中荷载作用下的位移和应力

研究了多层介质中的热弹性位移和应力.多层介质具有不同厚度,各层又具有不同的弹性性质,最上层表面上作用热荷载和集中荷载.假设各层分别是均匀、各向同性弹性材料,各层相关的位移分量是轴对称的,对称轴为各层表面的垂线.因此,各层应力函数满足无体力的单一方程.利用积分变换法求解了该方程,对由任意多个层数构造的多层介质,给出了其相应层数基础热弹性位移和应力的解析表达式.并对3层介质和4层介质时的数值结果进行了比较.     

热动力学问题的数值计算

 对含热传导的流体动力学方程组，用有限元方法进行数值求解。采用傅里叶热传导计算热流、用热流连续条件计算单元间接触面的温度、用三角形传热法计算体单元表面的热流，考虑各向同性弹塑性流体材料模型、三项式物态方程和导热系数与状态的相关性，给出了傅里叶热传导、接触传热、热应力应变效应、以及混合物冲击压缩特性等算例。对混合物冲击温度的数值模拟表明，小颗粒混合物在冲击压缩过程中，颗粒间的温度有差别、稍有波动，并随时间趋向于一致，以至热平衡。     

Tunneling radiation of a Gibbons-Maeda dilaton black hole

We use the Parikh-Wilczek method to treat Hawking radiation as a tunneling process across the event horizon and calculate the emission rate of a Gibbons-Maeda dilaton black hole. We show that if self-gravitation is taken into account, then the radiation deviates from the purely thermal spectrum, and the corrected spectrum is consistent with an underlying unitary theory. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 151, No. 1, pp. 172–175, April, 2007.     

服装主观热感觉的统计分析

本文用多因子方差分析模型和多重比较分析了服装穿着时的主观热感觉与服装品种、环境条件、穿着者的活动状态与籍贯之间的关系。通过主成分回归建立了用生理指标预测主观热感觉的模型，从而得出一种定量地评价服装属性的方法。