A multifunctional blue phase liquid crystal lens based on multi-electrode structure

A blue phase liquid crystal (BPLC) lens with multifunction using multi-electrode structure and a dielectric layer with high dielectric constant is proposed. The refractive index of the BPLC can be changed flexibly in different regions. Some functional or technical requirements such as switch between positive and negative lenses can be achieved. The lens reveals a good parabolic refractive index distribution and focus adjustment capacity simultaneously. The applied voltage on the electrodes is regular and computable. To decrease the applied voltage of the proposed lens with a large diameter, a drive-type adopted Fresnel lens is introduced.     

生物油蒸馏残渣理化性质及热失重研究

利用傅里叶变换红外光谱仪、激光共焦显微拉曼光谱仪和TGA Q500热分析仪对生物油蒸馏残渣及其在不同温度处理后的热解焦炭理化性质进行表征,并对其热失重特性进行分析。结果表明,生物油蒸馏残渣主要是由脂肪族、芳香族和低聚糖类等有机化合物组成;在氮气氛围下热解主要分为三个阶段:30-145℃为小分子物质挥发析出阶段145-550℃为大分子物质裂解和氧化阶段,550-750℃为焦炭产生阶段;热处理过程中各类物质逐步有序热解析出,同时固体产物石墨化程度随着热处理终止温度的升高而升高。     

基于3-羧基-5-氨基-1，2，4-三唑的Cd（Ⅱ）配合物的合成、晶体结构及催化性能

三唑类含能配合物在含能材料领域受到广泛关注。利用溶液法合成了一例含能配合物[Cd （Hatzc）₂（H₂O）]（LH1）,其中H₂atzc=3-羧基-5-氨基-1,2,4-三唑,并用X射线单晶衍射、元素分析、红外光谱等手段进行表征。单晶结构分析结果表明LH1属于单斜晶系,空间群为P2₁/n,呈一维链状结构,通过氢键相互作用形成三维超分子结构。LH1的爆速（D=10.4 km·s^-1）、爆压（p=55.2 GPa）、爆轰能量（16.51 kJ·g^-1）和密度（2.363 g·cm^-3）均优于大多数含能配合物。撞击感度（>40 J）和摩擦感度（>360 N）表明LH1对撞击和摩擦的敏感性较低。高氯酸铵（AP）的催化热分解结果表明,在LH1的催化作用下,AP的高温分解峰提前38℃,释放的热量在较短的时间增加0.46 kJ·g^-1,说明LH1对AP热分解具有良好的催化效果。     

能源与环境应用中的微波催化研究进展

微波是一种能量传递方式。与传统电加热相比,微波加热具有加热速度快、热惯性小、选择性加热等特点,因而被视为一种优质的能量来源。微波催化是一种使用微波对反应系统供能,从而推动催化反应进行的化学过程。近年来,许多研究者致力于探索和发展微波催化技术,包括利用微波技术提升化学反应速率、开发具有出色微波吸收能力的催化剂、建立节能环保的微波催化系统等。本文首先介绍了微波的相关理论,讲述了材料对微波的吸收原理;然后从微波催化降解挥发性有机物（Volatile Organic Compounds, VOCs）、微波催化污水处理、微波催化生物质热解和微波催化碳氢化合物转化等方面综述了微波催化在能源环境中的应用;最后对微波催化过程的机理展开了讨论。     

基于DFT密度泛函理论的聚酯热降解反应机理研究

本文应用密度泛函理论（DFT）研究钛系催化剂催化聚酯热降解的反应机理。分别以Ti(OEt)4化合物以及Ti(OEt)3 阳离子化合物为催化剂,探讨了二苯甲酸乙二酯（EDB）解聚反应的Lewis酸催化热降解反应机理（M1机理）和烷氧基配位催化热降解反应机理（M2机理）。结果表明,Lewis酸催化热降解反应机理在两种催化剂下的解聚反应能垒与无催化剂反应非常相似,未表现出明显促进作用;Ti(OEt)3 催化剂在M2机理中明显降低了解聚反应能垒,是聚酯热降解反应的催化活性中心。经轨道相互作用分析发现,阳离子催化剂和反应物EDB之间存在较为明显的轨道相互作用。     

石蜡/膨胀石墨/石墨烯复合相变储热材料的制备及性能

以石蜡(PA)作为相变储热材料、 膨胀石墨(EG)作为主导热材料和支撑材料, 石墨烯气凝胶(GA)作为导热增强材料和辅支撑材料制备了PA/EG/GA复合相变材料, 研究了GA添加量对复合相变材料相变温度、 相变潜热、 导热性能以及循环稳定性的影响. 结果表明, 所制备的80%PA-17%EG-3%GA复合相变材料导热性能良好, 循环稳定性出色. 与80%PA-20%EG复合材料相比, 该材料的相变温度、 相变潜热以及循环稳定性无明显变化, 但导热系数由4.089 W/(m·K)提升到了5.336 W/(m·K), 显示出良好的应用前景.     

Preparation and Properties of Poly（ether ether ketone）/Carbon Nanotube Modified Polypropylene Janus Composite Separator北大核心CSCD

Lithium-ion batteries （LIBs）have attracted wide attention because of their broad prospects in electric vehicles. However,the safety problems and low multiplier performance of the commercial polyolefin separator limit their further development,due to the poor dimensional thermal stability and low electrolyte absorption rate. Poly（ether ether ketone）（PEEK）and carbon nanotube（CNT）are compounded to coat on polypropylene （PP） to prepare Janus composite separator （PP@C） through the phase inversion method. PP@C composite separator does not deform at 180 ℃ for 0. 5 h（only slight deformation）,illustrating excellent thermal stability. The electrolyte absorption rate of PP@C2 is 193. 8%. The electrolyte uptake rate of the PP@C2 composite membrane was 193. 8%,which was 64. 5% higher than the PP membrane,showing a superduper electrolyte permeability. As a result,the specific discharge capacity of LIBs assembled with PP@C2 composite separator is 157. 6 mA·h/g at 0. 2 C and 129. 8 mA·h/g at 2 C,showing good rate performance with the capacity recovery rate of more than 99%. This might be attributed to the ultra-high thermal stability of PEEK,the good affinity of the electrolyte,the high conductivity of CNT,as well as the uniform dispersion of Li+ ,so that the separator can have excellent electrochemical performance while improving safety. © 2022, Science Press (China). All rights reserved.     

金刚石衬底上GaN HEMT沟道温度建模:各向异性且非均匀热导率的影响

为了改善GaN HEMT的自热效应,集成高热导率的金刚石衬底有助于增强器件有源区的热量耗散。然而,化学气相淀积(CVD)生长的多晶金刚石(PCD)具有柱状晶粒结构,导致了各向异性的材料热导率,且其热导率值与生长厚度有关。为此,通过建模金刚石生长过程中晶粒尺寸的演变过程,计算了金刚石沿面内和截面方向的热导率。基于该PCD热导率模型,利用计入材料非线性热导率的GaN器件热阻解析模型,计算得到了GaN HEMT沟道温度的波动范围,并分析了其与器件结构(栅长、栅宽、栅间距、衬底厚度)和功耗的依赖关系。最后,通过与有限元(FEM)仿真结果对比,分区域提取了GaN HEMT器件中PCD衬底的有效热导率,分别为260~310 W/(m·K)和1 250~1 450 W/(m·K)。本文的计算为预测金刚石衬底上GaN HEMT器件的沟道温度提供了快速、有效的方法。     

Study of thermal deformation of microelectronics packaging product by interferometric technique

In this paper, the out-of-plane deformation of silicon surface of Direct Chip Attachment (DCA) assembly, under thermal loading, was measured in real-time by Twyman/Green interferometry. The contour maps of the out-of-plane displacement fields of silicon surface under thermal loading and cycling of various temperature were obtained. Experimental results show that the relation between the out-of-plane displacement and temperature is nonlinear and varies with temperature cycling, due to nonlinear mechanical behavior of the materials used in electronic packaging. A comparison of the out-of-plane displacement fields of silicon surface measured by T/G interferometry in real-time and replicating technique of high temperature specimen grating of moire interferometry was made.     

推力轴承瞬态启动油膜热不稳定性的线性分析

以简化推力轴承为对象 ,理论上证明了推力轴承运行时存在热不稳定性 ,采用小扰动分析法得到了油膜温度的扰动方程 ,应用简正模态分析法推导了无量纲热不稳定性准则数以及推力轴承运行的热不稳定性准则 .