一种制备大量氧化锌纳米管的简单方法(英)

ZnO nanotubes were synthesized in large scale by thermal decomposition of the precursors obtained via chemical reaction between Zn(CH₃COO)₂·2H₂O and NaHCO₃ in the presence of surfactant sodium dodecyl sulfate (SDS). The inner diameters of the tubes were in the range of 80～100 nm, and outer diameters in the range of 160～260 nm with lengths up to a few micrometers. The products were characterized with XRD, TEM, and SEM.     

Scaling Function Between the Exponential-6 and the Generalized Lennard-Jones Potential Functions

The van der Waals forces for non-bonded interaction can be expressed either by the Exponential-6 or by the Lennard-Jones(m-n) potential functions, whereby m > n. Hitherto a relationship exists between the Exponential-6 and the Lennard-Jones(12-6) potential functions, with a scaling factor = 13.772 at or near the equilibrium and = 12.0 for long range interaction. This paper attempts to develop relationships between Exponential-6 and a more generalized Lennard-Jones(m-n). Analysis reveals that the relationship exists only when n = 6 and that two sets of scaling factors (as functions of index m) applies for the relationship between Exponential-6 and the Lennard-Jones(m-6), whereby m > 6.     

岩石的核磁共振自旋密度微成像

岩，心是油气储层的基本单元，其内部结构和渗流性质反映了油藏的基本特征．岩。心的精细描述是油藏描述、储层动态监测及设计强化采油方案的重要基础．本文利用核磁共振（NMR）自旋密度做成像，快速无损地观测到两类基本储油岩石——砂岩和灰岩的内部结构，提供了岩石渗透性、孔隙性及灰岩沉积环境等重要信息．1实验方法以自旋回波单片NMR成像脉冲序列为基础，设。P平面内样品的目施密度为P（。，v）．演化期t。，在。方向梯度场G。作用下，各处横向磁化矢量获得的相移为式中，7为共振核（在成像中一般为质子）的旋磁比，g为坐标位置·…     

interaction of nitro compounds with radicals: a quantum chemical study

Photoreduction of nitro compounds is accompanied by formation of various radical products that can react with the starting nitro compound, thus causing deviation of the decomposition kinetics from the first-order kinetics with respect to the nitro compound. The results of quantum chemical modeling of the reactions of nitro compounds with radicals and the pathways of further transformations of radical adducts formed in the reactions are presented. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 202–206, February, 2006.     

ELECTRON PARAMAGNETIC RESONANCE STUDIES OF SINGLE CRYSTAL SODIUM HEXAMOLYBDOCHROMATE (Ⅲ)Cr~(3+)/Na_3(AlMo_6O_(24)H_6)·8H_2O

An X-band EPR study on a Na_3(CrMo_6O_(24)H_6)·8H_2O single crystal diluted by its isomor-phic compound Na_3(AlMo_6O_(24)H_6)·8H_2O at room temperature is reported. Using the least squares-fitting method to simulate the EPR data for principal planes, the Hamiltonian parameterswere obtained. The principal values of the g tensors are g_(ZZ) = 1.904, g_(XX)= 1.973, g_(YY)=1.933. The zero field splitting tensor parameters are D = 0.275 cm~(-1), E = 0.05 cm~(-1). The fielddependence of Cr~(3+) energy levels with field at different angles from the principal axes whenthe field is along the principal planes is calculated based on these experimental parameters.The isofrequency plots of calculated field vs. angle are also shown. They agree well with theexperimental results.     

高比表面积窄孔分布氧化铝的制备研究 Ⅰ.沉淀条件的影响

 以硫酸铝液为原料，以氨水、氢氧化钠和铝酸钠为碱沉淀剂，采用pH摆动法制备了高比表面积、大孔径、窄孔分布、大孔体积氧化铝，考察了沉淀剂、沉淀温度及沉淀时酸侧pH值对氧化铝物性的影响，并对pH摆动法与等pH沉淀法的结果进行了比较．结果表明，通过改变制备参数可以获得高比表面积、大孔体积的氧化铝，当沉淀温度为70℃，pH摆动3或4次时，氧化铝的孔体积可高达1．0ml／g，比表面积仍大于300m2／g．用pH摆动法制得的样品比用等pH沉淀法制得的样品容易酸溶，对挤压成型有利．不同样品在酸溶液中的分散性表明，用氨水沉淀剂可获得相对较小的沉淀粒子．改变沉淀时酸侧的pH值，可导致沉淀粒子的结构发生变化．     

Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

Thermal behaviour of mechanically amorphized colemanite

The effect of mechanical treatment on the thermal decomposition of calcium borate, colemanite — Ca₂B₆O₈(OH)₆·2H₂O was studied by means of XRD, FTIR, SEM and thermal analysis methods. Grinding of colemanite causes the solid-state amorphization of this mineral, as a result of the destruction of its structure along the cleavage plane. The decrease in the particle size of the original material and the increase in its internal structural disorder affect the temperatures and the magnitudes of the thermal effects accompanying the processes of dehydration and dehydroxylation. The diminishing values of the enthalpies of these processes may be a quantitative measure of the degree of amorphization of colemanite.Dedicated to Dr. Robert Mackenzie on the occasion of his 75th birthdayThe author is grateful to Professor L. Stoch for helpful discussions.Support for this work was provided by the Polish Committee for Scientific Research (KBN) — Grant No. 3 P407 034 06.     

Amphiphilic graft copolymers with poly(oxyethylene) side chains: Synthesis via activated ester intermediates—properties

Amphiphilic graft copolymers were synthesized via activated ester substitution of derivatives of fumaric acid with amino-functionalized methoxypoly (oxyethylene)s (MPEO-NH₂) of different molecular weights. The monomeric activated esters, isopropyl pentachlorophenyl fumarate (PCPFA) and isopropyl succinimido fumarate (SIFA), were copolymerized with styrene (St) or N-vinyl pyrrolidone (VP) at equimolar ratio. The polymeric-activated esters proved to be good precursors for grafting of definite amounts of MPEO-NH₂. The aminolysis of the succinimide esters and VP-containing copolymers proceeded with gel formation due to extensive hydrogen bonding. The hydrodynamic behavior, the emulsifying ability, the thermal properties, and crystallinity of the graft copolymers were studied as a function of their molecular characteristics. The length of the PEO grafts and the degree of grafting are the factors which affect the melting parameters and the crystallinity of the side chains. © 1994 John Wiley & Sons, Inc.     

Effects of Total Thermal Balance on the Thermal Energy Absorbed or Released by a High-Temperature Phase Change Material

Front tracking and enthalpy methods used to study phase change processes are based on a local thermal energy balance at the liquid–solid interface where mass accommodation methods are also used to account for the density change during the phase transition. Recently, it has been shown that a local thermal balance at the interface does not reproduce the thermodynamic equilibrium in adiabatic systems. Total thermal balance through the entire liquid–solid system can predict the correct thermodynamic equilibrium values of melted (solidified) mass, system size, and interface position. In this work, total thermal balance is applied to systems with isothermal–adiabatic boundary conditions to estimate the sensible and latent heat stored (released) by KNO3 and KNO3/NaNO3 salts which are used as high-temperature phase change materials. Relative percent differences between the solutions obtained with a local thermal balance at the interface and a total thermal balance for the thermal energy absorbed or released by high-temperature phase change materials are obtained. According to the total thermal balance proposed, a correction to the liquid–solid interface dynamics is introduced, which accounts for an extra amount of energy absorbed or released during the phase transition. It is shown that melting or solidification rates are modified by using a total thermal balance through the entire system. Finally, the numerical and semi-analytical methods illustrate that volume changes and the fraction of melted (solidified) solid (liquid) estimated through a local thermal balance at the interface are not invariant in adiabatic systems. The invariance of numerical and semi-analytical solutions in adiabatic systems is significantly improved through the proposed model.