Kinetics and mechanism of thermal decomposition of hydroxylammonium nitrate

The kinetics of thermal decomposition of melted hydroxylammonium nitrate have been investigated by the rate of heat production in the temperature range 84.8–120.9°C. The decomposition proceeds with autocatalysis and up to 60 % of conversion the rate of the process increases proportionally to the square of the degree of decomposition. The initial rate is proportional to the square of the concentration of HNO₃ formed due to dissociation of the salt. The activation energy of this process is 15.3±1.8 kcal/mol. It is suggested that the initial stage the process proceeds via interaction between N₂O₃ and NH₃OH⁺, whereas the subsequent acceleration is due to oxidation of NH₃OH⁺ by nitrogen oxides formed as well as by nitrous acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1897–1901, November, 1993.     

Koexistenzbeziehungen,Darstellung und Eigenschaften ternärer Phasen im System Cu/Mo/O

Coexistence Relations, Preparation and Properties of Ternary Compounds in the System Cu/Mo/O The phase diagram of the ternary system Cu/Mo/O is presented at 773 K. The compounds CuMoO₄, Cu₃Mo₂O₉, Cu₄Mo₅O₁₇, Cu₆Mo₅O₁₈, Cu_4–xMo₃O₁₂, and Cu_xMoO₃ are found to be thermodynamical stable. The homogeneity range of Cu_4–xMo₃O₁₂ runs to x = 0.1–0.2. Single crystals of CuMoO₄ and Cu₃Mo₂O₉ were grown by chemical transport reactions with TeCl₄, Cl₂, HCl, and Br₂ as transport agent. The results were compared with thermochemical calculations. The decomposition of CuMoO₄ and Cu₃Mo₂O₉ was investigated with thermal analysis and decompositon pressure measurements.     

溴碘化银薄片乳剂颗粒中碘离子分布对潜影分散的影响

碘溴化银乳剂薄片颗粒的潜影分散与碘离子在颗粒中的分布有关。本文用交叉光楔曝光技术测定了由次潜影造成的潜影分散,并根据所测出的潜影分散度和乳剂的表面感光度,对内、表敏的分布作了分析。结果表明,碘离子分布在颗粒边缘的乳剂,其表面潜影分散度要比碘离子均匀分布的颗粒更甚,后者且表现出内、表敏度竞争的现象。     

Thermal analysis of phenylethynyl end-capped fluorinated imide oligomer afr-pepa-4

Thermal analysis of phenylethynyl end-capped imide oligomer AFR-PEPA-4 was performed to characterize cure reaction, thermal stabilities and semicrystalline behavior of AFR-PEPA-4 oligomer and its cured polyimide. Cured AFR-PEPA-4 polyimide showed high T _gs up to 418°C. Both AFR-PEPA-4 oligomer and polyimide exhibit excellent thermal stabilities comparable to PETI-5 polyimides. AFR-PEPA-4 imide oligomer has a T _m of 330°C and exhibits spherulite crystalline morphology in the film. The crystallinity in AFR-PEPA-4 films could not be regenerated under any annealing conditions after the initial melt.     

Performance of hollow-fiber flow field-flow fractionation in protein separation

Since hollow-fiber flow field-flow fractionation (HF FIFFF) utilizes a cylindrical channel made of a hollow-fiber membrane, which is inexpensive and simple in channel assembly and thus disposable, interests are increasing as a potential separation device in cells, proteins, and macromolecules. In this study, performance of HF FIFFF of proteins is described by examining the influence of flow rate conditions and length of fiber (polyacrylonitrile or PAN in this work) on sample recovery as well as experimental plate heights. The interfiber reproducibility in terms of separation time and recovery was also studied. Experiments showed that sample recovery was consistent regardless of the length of fiber when the effective field strength (equivalent to the mean flow velocity at the fiber wall) and the channel void time were adjusted to be equivalent for channels of various fiber lengths. This supported that the majority of sample loss in HF FIFFF separation of apoferritin and their aggregates may occur before the migration process. It is finally demonstrated that HF FIFFF can be applied for characterizing the reduction in Stokes' size of low density lipoproteins from blood plasma samples obtained from patients having coronary artery disease and from healthy donors.     

Synthesis and characterization of new poly[phenylquinoxaline(ether)imides]

A series of new aromatic poly[phenylquinoxaline(ether)imides] were synthesized by solution polycondensation of aromatic diamines containing preformed phenylquinoxaline groups with dianhydrides having ether linkages and isopropylidene or hexafluoroisopropylidene units. All polymers are readily soluble in polar organic solvents (N-methylpyrrolidinone, DMF, dimethylacetamide) and in less polar liquids such as chloroform. Very thin coatings were deposited onto silicon wafers. According to atomic force microscopy, they had a smooth, pinhole-free surface. The polymers showed high thermal stability with decomposition temperatures above 470 °C and glass transition temperatures in the range of 210–238 °C, being thus characterized by a large gap between the glass transition and decomposition temperatures.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th year anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1957, September, 2004.     

Thermal transformations in systems based on zeolites Y,X, and A containing zinc and sodium nitrates

Thermal transformations in systems formed by interaction of Zn and Na nitrates with Y, X, and A zeolites were studied by TG—DTA technique. Temperature regions of existence of adsorbed water, water of crystallization, and decomposition of NO₃ ^– anion were determined. These intervals depend on the composition, structure, method of preparation, and pre-treatment conditions of zeolite systems. The extent of NO₃ ^– decomposition depends not only on the zinc and sodium content but also on the presence of ammonia involved in NO₃ ^– reduction. The zeolite matrix strongly stabilizes the occluded NO₃ ^– anions. A portion of zinc oxide formed by zinc nitrate decomposition is probably localized inside the zeolite cavities as the [Zn—O—(ZnO) _n —Zn]²⁺ particles. The latter compensate charges of the isolated [AlO₄]^– tetrahedra.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

Advanced kinetic tools for the evaluation of decomposition reactions

Summary An advanced kinetic study on the thermal behaviour of pyrotechnic ignition mixtures has been carried out by differential scanning calorimetry using different B/KNO3 mixtures (50:50, 30:70, 20:80) as a model reaction. The experimental conditions applied (isochoric conditions/closed crucibles and isobaric conditions/open crucibles) as well as the composition of the mixtures noticeably influences the relative thermal stabilities of the energetic materials. The kinetic study focused on the prediction of the thermal stability of the different mixtures both in extended temperature ranges and under temperature conditions at which ordinary investigation would be very difficult. Using advanced numerical tools [1], thermal ageing and influence of the complex thermal environment on the heat accumulation conditions were computed. This can be done for any surrounding temperature profile such as isothermal, non-isothermal, stepwise, modulated, shock, adiabatic conditions and additionally for temperature profiles reflecting real atmospheric temperature changes (yearly temperature profiles of different climates with daily minimal and maximal fluctuations). Applications of accurate decomposition kinetics enabled the determination of the time to maximum rate under adiabatic conditions (TMR_ad) with a precision given by the confidence interval of the predictions. This analysis can then be applied for the examination of the effects of the surrounding temperature for safe storage or transportation conditions (e.g. determination of the safe transport or storage temperatures).     

A theoretical investigation of the interaction between H,Li, Na,K, and fullerenes

We studied the interaction between H, Li, Na, and K with one and two C₆₀ molecules using unrestricted Hartree–Fock (UHF) methods. We investigated the effects of distances between the doping atoms and the C₆₀ clusters, total charges, interaction energies, stabilities, HOMO‐LUMO energy differences, charge distribution, and potential energy surfaces. The effect of each doping atom was analyzed and potential technological applications discussed. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005