Study of latent and etched tracks by a charged particle transmission technique

A recently suggested technique for non-destructive investigation of inhomogeneities in thin objects, which is based on the measurement of the energy spectra of charged particles transmitted through the object, is used for the study of thermal annealing of 10–20 μm thick polyethylene terephtalate, polypropylene and polycarbonate foils irradiated with 1–10 MeV/amu heavy ions. At elevated temperature a foil linear contraction is observed on pristine and irradiated material. Also the foil roughness increases with increasing temperature. On the same foils with etched pores 0.5–1.0 μm in diameter, the thermal annealing results in gradual closing of the pores up to about 30% of their initial diameter at the temperatures of 150–175°C. At higher temperatures the pore diameter increases and achieves its initial value.     

Thermal analysis and water-cooling design of the CSNS MEBT 324 MHz buncher cavity

At least two bunchers are needed in the 3 MeV H- Medium Energy Beam Transport(MEBT)line located between RFQ and DTL for the CSNS(China Spallation Neutron Source).A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity,higher impedance and lower risk of multipacting.By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH,the thermal and structural analyses have been carried out,the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented,the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.     

Quantum Information Splitting Based on Current Cavity QED Techniques

We propose two schemes for quantum information splitting via W-class state. The first scheme is based on the interaction of single atom with single-mode field, while the second scheme is based on the simultaneous interaction of two atoms with single-mode cavity. For the first scheme, the difIiculty of two atoms required to be simultaneously sent through one cavity is avoid. For the second scheme, it is immune to thermal field. Both schemes are experimentally feasible based on current cavity QED techniques.     

Correlation between the Soret coefficient and the static structure factor in a polymer blend

Mutual mass diffusion and thermal diffusion has been investigated in poly(dimethylsiloxane)/ poly(ethylmethylsiloxane) (PDMS/PEMS) polymer blends of equal weight fractions. Molar masses ranged from below 1 to over 20 kg/mol. Both the mutual mass (D) and the thermal diffusion (D_T) coefficient contain a thermally activated factor with an activation temperature of 1415 K. The molar mass dependence of D_T is due to an end-group effect of the local friction coefficient. The thermal diffusion coefficient in the limit of long chains and infinite temperature is D_T^0, = - 1.69×10^-7cm²(sK)^-1. The Soret coefficient S_T of blends far enough away from a critical point is proportional to the static structure factor S(q = 0).     

Improving the gas barrier,mechanical and thermal properties of poly(vinyl alcohol) with molybdenum disulfide nanosheets

New multifunctional materials with both high structural and gas barrier performances are important for a range of applications. Herein we present a one‐step mechanochemical process to prepare molybdenum disulfide (MoS₂) nanosheets with hydroxy functional groups that can simultaneously improve mechanical strength, thermal conductivity, and gas permittivity of a polymer composite. By homogeneously incorporating these functionalized MoS₂ nanosheets at low loading of less than 1 vol %, a poly(vinyl alcohol) (PVA) polymer exhibits elongation at break of 154%, toughness of 82 MJ/m³, and in‐plane thermal conductivity of 2.31 W/m K. Furthermore, this composite exhibits significant gas barrier performance, reducing the permeability of helium by 95%. Under fire condition, the MoS₂ nanosheets form thermally stable char, thus enhancing the material's resistance to fire. Hydrogen bonding has been identified as the main interaction mechanism between the nanofillers and the polymer matrix. The present results suggest that the PVA composite reinforced with 2D layered nanomaterial offers great potentials in packaging and fire retardant applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 406–414     

The thermophysical properties of low‐temperature Pb plasma

The thermophysical properties of low‐temperature Pb plasma are calculated at temperatures 10–100 kK and densities below 0.2 of the solid‐state value. The thermodynamic values (pressure and internal energy) and transport coefficients (electrical conductivity, thermal conductivity, and thermal power) are considered. The plasma composition and thermodynamic parameters are obtained within the chemical approach, namely by means of the solution of the corresponding system of the coupled mass action law equations. Atom ionization up to +4 is taken into consideration. The electronic transport coefficients are calculated within the relaxation time approximation. The results obtained by means of the present model are compared with the available data of other models and experiments.     

Synthesis,Hirshfeld surface analysis,luminescence and thermal properties of three first-row transition metal complexes containing 4′-hydroxy-2,2′:6′,2″-terpyridine: Application for preparation of nano metal oxides

A series of new mono- and bis-terpyridine complexes [Mn(tpyOH)Cl₂] ( 1 ), [Ni(tpyOH)₂](PF₆)₂ ( 2 ) and [Zn(tpyO)(η¹-OCOCH₃)(H₂O)]⋅3H₂O ( 4 ) containing 4′-hydroxy-2,2′:6′,2″-terpyridine (tpyOH) were synthesized and structurally characterized using elemental analysis, infrared spectroscopy and single-crystal X-ray diffraction. The reaction of MnCl₂ with tpyOH in a mixture of methanol and CH₂Cl₂ resulted in the formation of 1 . The X-ray crystal structure of 1 reveals that Mn(II) is penta-coordinated by three nitrogen atoms from tpyOH and two Cl⁻ in a slightly distorted trigonal bipyramidal geometry. Complex 2 was also prepared by the reaction of nickel(II) chloride with tpyOH in a methanolic medium in the presence of NH₄PF₆. Notably, the complex [Ni(tpyOH)(tpyO)]PF₆ ( 3 ), obtained during the crystallization of 2 from dichloromethane, was characterized using X-ray crystallography which shows that six nitrogen atoms from terpyridine ligands occupy the coordination sites around the Ni(II) centre in a distorted octahedral geometry with four longer bonds and two shorter Ni N bonds. The reaction of zinc(II) acetate with tpyOH in a mixture of methanol and CH₂Cl₂ led to the formation of 4 . The crystal structure of 4 reveals the formation of penta-coordinated Zn(II) complex containing three nitrogen atoms from tpyO, a monodentate acetate ligand and one coordinated water molecule. Hirshfeld surface analyses and two-dimensional fingerprint plots show that the main interactions are O…H/H…O contacts in 1 , 3 and 4 . The thermal decomposition reactions of 1 , 2 and 4 were studied using thermogravimetric analysis in detail due to their different structures. The solution luminescence features of 1 , 2 and 4 include high-energy intense π → π* intraligand and low-energy metal-to-ligand charge transfer transitions at room temperature. The calcination of the coordination complexes led to the formation of corresponding nano metal oxides. The products were structurally characterized using infrared spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The average particle size using Scherrer's equation was calculated to be below 50 nm.     

Residues,dissipation and risk evaluation of spiroxamine in open-field-grown strawberries using liquid chromatography tandem mass spectrometry

The dissipation dynamic and residues of spiroxamine in open-field-grown strawberries were determined using liquid chromatography tandem mass spectrometry (LC–MS/MS). Spiroxamine application was performed according to Egyptian good agricultural practices recommendation. A QuEChERS-based extraction method along with direct analysis with an LC–MS/MS analytical method were optimized and validated, and the specificity of the techniques used was considered satisfactory. Good linearity (R² > 0.999) was obtained for spiroxamine within the range of 0.001–0.1 μg/ml. The mean recoveries varied between 97.1 and 108.2%, with inter- and intra-day precision (RSD) <4.9%. The limit of quantitation for spiroxamine was 0.001 mg/kg. The results indicated that spiroxamine degradation in strawberry followed first–order kinetics (R² > 0.9929) with an estimated half-life value of 4.71 days. Considering the Australian maximum residue limit (0.05 mg/kg) in strawberry and based on the results from residue trials with a preharvest interval of 14 days for strawberry, compliance can be expected. The present results could provide guidance to fully evaluate the risks of spiroxamine residues, preventing any potential health risk to consumers.     

水流损失和热补偿共同作用对增强型地热系统(EGS)产能影响的研究

基于青海共和盆地-3705m地热田实测数据,结合流固耦合传热理论并运用Comsol软件,建立了离散型裂隙岩体流体传热模型。考虑水流损失和热补偿共同作用,模拟得到了开采过程中上、下岩层(盖层和垫层)为绝热不渗透、传热不渗透、渗透传热时,储层(上、下岩层和压裂层)温度场的变化特征,分析了产出流量、水流损失、产出温度、产热速率的变化规律。研究结果表明:采热过程中产出流量始终小于注入流量;产出流量增幅速率先增大后减小,最后趋于稳定,前3a产出流量增幅超过总增幅量的3/4;忽略水流损失,将高估产热速率,采热初期甚至达到考虑水流损失时产热速率的3倍以上;考虑水流损失,产热速率呈先快速上升再趋于稳定后逐渐下降的趋势,最优开采时间为3a^11a;研究上、下岩层对产出温度的影响,仅考虑传热,采热寿命延长5.43%,同时考虑渗流传热时,采热寿命延长2.71%;采热前9a,水流损失占主导作用,即流入上、下岩层水流损失对产热速率的影响高于热补偿效应,开采10a后,热补偿效应占主导作用;同时考虑水流损失和热补偿效应得到的产热速率变化规律与实际工程更为符合,建议选择低渗透能力的上、下岩层延长增强型地热系统(EGS)运行时间。     

Analysis of volatile organic compounds in indoor environments using thermal desorption with comprehensive two‐dimensional gas chromatography and high‐resolution time‐of‐flight mass spectrometry

Building‐related health effects are frequently observed. Several factors have been listed as possible causes including temperature, humidity, light conditions, presence of particulate matter, and microorganisms or volatile organic compounds. To be able to link exposure to specific volatile organic compounds to building‐related health effects, powerful and comprehensive analytical methods are required. For this purpose, we developed an active air sampling method that utilizes dual‐bed tubes loaded with TENAX‐TA and Carboxen‐1000 adsorbents to sample two parallel air samples of 4 L each. For the comprehensive volatile organic compounds analysis, an automated thermal desorption comprehensive two‐dimensional gas chromatography high‐resolution time‐of‐flight mass spectrometry method was developed and used. It allowed targeted analysis of approximately 90 known volatile organic compounds with relative standard deviations below 25% for the vast majority of target volatile organic compounds. It also allowed semiquantification (no matching standards) of numerous nontarget air contaminants using the same data set. The nontarget analysis workflow included peak finding, background elimination, feature alignment, detection frequency filtering, and tentative identification. Application of the workflow to air samples from 68 indoor environments at a large hospital complex resulted in a comprehensive volatile organic compound characterization, including 178 single compounds and 13 hydrocarbon groups.