Comparative study of optical analysis methods for thin films

Three popular optical analysis methods (the transfer-matrix method, the Tinkham formula, and Beer's law) have been used for analyzing the optical spectra of thin films. While the transfer-matrix method is an accurate method, the Tinkham formula and Beer's law are approximate methods. Here we investigated the three methods using measured transmittance spectra of insulating transition-metal dichalcogenide (TMD) thin films on a quartz substrate. Three different semiconducting 2H-TMD systems (MoS₂, MoSe₂, and MoTe₂) were measured and analyzed. The optical conductivities obtained from the measured transmittance spectra using the transfer-matrix method and Tinkham formula and the absorption coefficients obtained using the transfer-matrix method and Beer's law were compared. The comparisons show some discrepancies. The reasons for the discrepancies between the results obtained via the two different methods were examined and the application limitations of the Tinkham formula and Beer's law were discussed.     

波片组合在调整偏振态势中的应用与分析

为了获得椭圆率角不变、椭圆方位角可连续变化和椭圆率角可连续变化、椭圆方位角不变的椭圆偏振光,采用矩阵光学方法对按一定方位角摆放的λ/4波片和λ/2波片,在线偏振光通过后的偏振态变化,进行了理论分析和实验验证,取得了可靠的数据。结果表明,理论分析是正确的,这一结果对光路调整和偏振态的转换是有帮助的。     

整数环上一类三阶矩阵方程有解的充要条件

给出了整数环上一类三阶矩阵方程有解的充要条件.     

ICP-AES内标法测定分子筛的组成

首次通过ICP-AES仪研究了分子筛化学组成全分析的方法，采用HNO3-HF混合酸密闭溶样，用H3BO3配合F^-，分别采用内标法和基体消除法消除基体效应．将研究结果与经典方法比较表明：采用本文研究的分析方法，结果准确可靠，符合分析要求，尤其对杂原子分子筛以及金属氧化物修饰的分子筛的组成分析具有应用价值．     

液相基质辅助激光解吸电离-傅里叶变换离子回旋共振质谱研究

选用液相基质制样,考察了激光强度、回旋池开门时间等因数对基质辅助激光解吸电离-傅里叶变换离子回旋共振质谱(MALDI—FT—ICR—MS)检测结果的影响,优化了实验条件。使用液相制样方法对5类实际样品进行了MALDI—FT-ICR—MS检测,结果表明：液相基质具有很好的通用性,质谱信号稳定、持久。利用FT-ICR—MS特有的超高分辨率与准确度,能够很准确地测定化合物组成。     

基质固相分散气相色谱电子捕获检测器测定葡萄酒中5种农药残留

采用基质固相分散的样品前处理方法,替代传统的液-液萃取、固相萃取,从葡萄酒中提取、净化5种农药,气相色谱电子捕获检测器分析测定,基质匹配标准校正方法补偿基质效应。添加3水平(0.01-0.10mg/L)的回收率为85.7%-104.6%;相对标准偏差为3.6%-8.5%;检出限达到0.1-0.8μg/kg。本方法可用于葡萄酒样品中农药残留的测定。     

蛋白质组学中基质辅助激光解吸电离的基质研究进展

基质辅助激光解吸电离(MALDI)技术是近年来发展起来的新的质谱离子化技术。本文较为系统地综述了应用于蛋白质组学中的MALDI基质的最新进展以及不同的基质的优缺点及应用范围,并且归纳了其发展趋势。     

壳聚糖富集火焰原子吸收法测定水中痕量铜

采用壳聚糖修饰钨丝基质螺旋卷，直接浸入含有痕量铜的pH5．0的Brltton-Robinson缓冲溶液中，经电磁搅拌富集一定时间后，将其转移至空气／乙炔火焰燃烧器上，利用火焰原子吸收光谱法简便快速测定水中痕量铜。方法的线性范围为2—75μg／L；检出限为0．98μg／L。同一支钨丝螺旋卷重复涂敷壳聚糖富集Cu，RSD(n=6)为2．7％。     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.