密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

从炔烃衍生物出发的有机合成方法学

研究了过渡金属催化的炔烃衍生物的异构化反应.从α,β-炔酮、2-炔酸酯和2-炔酸酰胺可以生成相应的(E,E)-共轭双烯酮、双烯酸酯和双烯酸酰胺.首次从2-炔醇异构化为相应的2-烯酮或2-烯醛.这一反应具有简单、高产率和立体选择性的优点.假设反应烯经过连二烯中间体,然后再异构化成产物,这一反应提供了方便而有潜在应用价值的方法以制备天然产物合成时的重要中间体.     

An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

超临界流体萃取仪器的研制

本文报道了以国产原配件为基础，成功地研制了分析规模的超临界流体萃取仪器、并对仪器性能进行了全面考察，仪器性能稳定，重现性良好（ＲＳＤ＜３．１％），定量线性关系可靠，可满足定量萃取的要求。     

分子内Diels-Alder反应在有机合成方面的新进展

本文按合成产物的结构类型,综述分子内 Diels-Alder 反应在有机合成方面的新进展。     

Simultaneous determination of traces of heavy metals by solid-phase spectrophotometry

A coupling sensitive solid phase spectrophotometric (SPS) procedure for determination of traces of heavy metals (Me-SPS) and multicomponent analysis by multiple linear regressions (MA), a simple methodology for simultaneous determination of metals in mixtures was inaugurated. The Me-SPS procedure is based on sorption of heavy metals on PAN-resin and direct absorbance measurements of colour product Me-PAN sorbed on a solid carrier in a 1-mm cell. This methodology (Me-SPS-MA) was checked by simultaneous determination of metals in synthetic mixtures with different compositions and contents of metals important in pharmaceutical practice: Zn, Pb, Cd, Cu, Co, and Ni. Good agreement between experimental and theoretical amounts of heavy metals is obtained from the recovery test (78.3–110.0%). The proposed method enables determination of particular metal ion at the ng mL⁻¹ level and it was successfully applied to the determination impurities from heavy metal traces in pharmaceutical substances (Cu in ascorbic acid, Pb in glucose, and Zn in insulin). The proposed procedure could be possible contribution to the development of pharmacopoeial methodology for a heavy metals test.     

微量元素锌在治疗Bell麻痹中的作用

为探讨急性早期应用补锌和综合疗法治疗Bell麻痹 ,将 1 5 8例Bell麻痹患者 ,随机分成两组 :(1 )补锌组 (补锌 +综合疗法 ) ;(2 )对照组 (单纯综合疗法 )。对其进行了观察对比治疗 ,同时检测了所有患者治疗前后自身对照发锌值 ,还对所有患者进行了定位诊断、面神经电反应测试、并对面肌功能进行评分。结果表明 ,对定位诊断其病变在D段、面肌功能评分在 1 1分以下、面神经无电反应患者 ,即使给予早期综合治疗 ,效果仍较差 ,而早期给予补锌加综合治疗效果优于对照组 ,其它段内患者治疗次数和治愈天数也均优于对照组。可见微量元素锌在发挥免疫应答、免疫调控中的重要作用     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

Economic modeling of board test strategies

A long and deep recession, coupled with continuous competitive pressure to reduce costs, is forcing many companies to review their test strategies. Testing costs have become a more significant proportion of the overall manufacturing cost even though manufacturing yields have increased dramatically over the past ten or twelve years. This causes attention to be focused on testing costs as a key source of cost reduction. The increased use of DFT and the integration of design and test are very positive moves towards controlling testing costs but other methods employed can often backfire. The increased use of low priced testers is one such method. The pressure to reduce costs, higher process yields and exhortations that testing adds no value can lead the test engineering manager to take the cheap route. In reality this can often turn out to be an expensive decision. The only way to avoid expensive mistakes is to perform an economic analysis of the alternative courses of action. In most cases this is done, but not always in the right manner or with the necessary amount of detail to make the comparisons meaningful. This article discusses the need for effective cost analysis of test strategies and highlights some of the pitfalls.     

Comments on “Aliasing Properties of Circular MISRs”

The analysis of aliasing probability presented in a recent article, Aliasing Properties of Circular MISRs [1], is based on an error model that cannot adequately represent real circuits. We show why conclusions presented in [1] should not be used in practice, substantiating our claim with experimental results.This work was supported in part by grants from the Natural Sciences and Engineering Research Council of Canada and in part by the British Columbia Advanced Systems Institute