Temperature factor effect on the structure of the separated flow within a supersonic gas stream

The effect of the temperature factor, that is, the ratio of the body temperature to the freestream stagnation temperature, on the structure of the separated flow formed in the presence of a concave corner in a supersonic stream is studied. The strong influence of the temperature factor on the separation zone length and the flow-generated aerodynamic characteristics is established. It is shown that for fairly large deflection angles this flow cannot be described by free interaction, or triple deck, theory.     

Rheological properties of polyacrylates used as synthetic road binders

Most adhesives and binders, including bitumen for asphalt mixture production, are presently produced from petrochemicals after the refining of crude oil. The fact that crude oil reserves are a finite resource means that in the future, it may become necessary to produce these materials from alternative and probably renewable sources. Suitable resources of this kind may include polysaccharides, plant oils and proteins. This paper deals with the synthesis of polymer binders from monomers that could, in future, be derived from renewable resources. These binders consist of polyethyl acrylate (PEA) of different molecular weight, polymethyl acrylate (PMA) and polybutyl acrylate (PBA), which were synthesised from ethyl acrylate, methyl acrylate and butyl acrylate, respectively, by atom transfer radical polymerisation. The rheological properties of these binders were determined by means of oscillatory testing using a dynamic shear rheometer and combinations of stress/strain, temperature and frequency sweeps. The results indicate that PEA can be produced to have rheological properties similar to that of ‘soft’ 100/150 penetration grade bitumen, PMA with similar rheological properties to that of ‘hard’ 10/20 penetration grade bitumen, while PBA, due to its highly viscous nature and low dynamic moduli, cannot be used on its own as a binder. The synthetic polymers were found to be thermo-rheologically simple, and the shift factors, used to produce the dynamic moduli master curves, were found to fit an Arrhenius function.     

日本关西宽带实验网印象

本文根据实地考察内容，结合宽带网络技术和业务重点及实施策略，全面介绍了日本关西宽带实验网发展背景，通信与广播电视综合应用实验和Ｂ－ＩＳＤＮ实用化实验的进展以及ＮＴＴ所起作用。文章最后就关西宽带实验网的借鉴意义提出了几方面意见。     

8mm PIN开关的研制

介绍毫米波开关的用途，探讨ＰＩＮ器件的工作机理，推导了ＰＩＮ工关的设计公式，计算设计了具体的开关，对于关进行了温补，加速，绝缘吸收和导电吸收等一系列的技术处理，从而得到了性能优良的适用地工程型号产品的８ｍｍ开关。     

一些高Tc超导体的弹性性质

 本文用超声相比较方法测定了高T_c超导体La_1.85Sr_0.15CuO₄，La₂CuO₄和YBa₂Cu₃O₇的纵波和横波声速，进而导出了它们的纵向模量、切变模量、杨氏模量、泊松比、德拜温度及定体比热。在La_1.85Sr_0.15CuO₄样品上，还进行了压力实验，发现所有弹性模量都是随压强增加而增加。定体比热c_V和泊松比σ在高压下则略有下降。德拜温度是随压强增加而增加的。     

Thermal Monitoring of Self-Checking Systems

With the increasing power density in integrated systems resulting from scaling down, the occurrence of field failures due to overheating has considerably increased. Faulty operation can be prevented by on-line temperature monitoring. This paper deals with questions of on-line temperature monitoring in safety-critical systems. First the possible temperature sensors are reviewed and basic principles of self-checking systems including such sensors are detailed, then a new temperature sensor cell with extremely good parameters designed especially for DfTT applications is presented. The basic questions of integrating thermal sensors into self-checking systems are also discussed.     

重油隧道窑的红外温度测量

在分析重油隧道窑工况的基础上，分析了窑内烟气、燃烧物发射率、窑墙效应、环境温度对红外测温的影响以及热电偶测温的缺点，采取了相应的措施。利用中国发现专科实现了传感器输出信号的一致性。给出了传感器在重滑隧道窑现场使用２．５年后的复校数据。最后，估算出了用红外温度计替代热电偶测窑温产生的经济效益。     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

ZST微波陶瓷在介质振荡器上的应用研究

用传统固相法制备ZST(氧化锆-氧化锡-氧化钛)系微波陶瓷,研究了ZST系微波陶瓷的组成对介电性能的影响。通过X-射线衍射(XRD)和HP8714ET网络分析仪对其晶体结构和微波介电性能进行研究,实验结果表明:少量掺Bi2O3的ZST系陶瓷材料可把烧结温度降低至1 260℃,微波介电性能较好;掺入量大于2%(质量分数)时,ZST系微波陶瓷在晶界偏析形成了Bi2Ti2O7新相,微波性能下降。用微波介电性能较好的ZST系陶瓷制成的介质振荡器进行测试,其电性能满足设计要求。     

Diagnostic Data Compression Techniques for Embedded Memories with Built-In Self-Test

A system-on-chip (SOC) usually consists of many memory cores with different sizes and functionality, and they typically represent a significant portion of the SOC and therefore dominate its yield. Diagnostics for yield enhancement of the memory cores thus is a very important issue. In this paper we present two data compression techniques that can be used to speed up the transmission of diagnostic data from the embedded RAM built-in self-test (BIST) circuit that has diagnostic support to the external tester. The proposed syndrome-accumulation approach compresses the faulty-cell address and March syndrome to about 28% of the original size on average under the March-17N diagnostic test algorithm. The key component of the compressor is a novel syndrome-accumulation circuit, which can be realized by a content-addressable memory. Experimental results show that the area overhead is about 0.9% for a 1Mb SRAM with 164 faults. A tree-based compression technique for word-oriented memories is also presented. By using a simplified Huffman coding scheme and partitioning each 256-bit Hamming syndrome into fixed-size symbols, the average compression ratio (size of original data to that of compressed data) is about 10, assuming 16-bit symbols. Also, the additional hardware to implement the tree-based compressor is very small. The proposed compression techniques effectively reduce the memory diagnosis time as well as the tester storage requirement.