金属基底增敏的干涉型高温光纤传感器

为了实现对井下潜油电泵机组温度的实时监测,设计了一种由粗锥型单模--多模--单模(Coarse Cone Singlemode-Multimode-Singlemode, CCSMS)构成的马赫--曾德尔干涉(Mach-Zehnder Interferometer, MZI)型高温光纤传感器。该结构采用直接熔接的方法将单模光纤与多模光纤相熔接;接着通过调整熔接机的熔接参数,在单模光纤上制作出粗锥结构;最后将制备的结构嵌入铜基板的U型槽中,实现传感器的增敏封装。对封装后的传感器的温度响应特性进行了测试。实验结果表明,在40～250℃的温度范围内,该传感器实现了灵敏度为124.9 pm/℃的温度传感。对其稳定性和重复性进行了测试。结果表明,传感器的稳定性最大误差约为0.44%,重复性最大误差约为2.29 pm/℃。该传感器具有灵敏度高、重复性和稳定性好的特点,有望用于油气井下潜油电泵机组的温度监测。     

The Potential Antidepressant Action of Duloxetine Co-Administered with the TAAR1 Receptor Agonist SEP-363856 in Mice

Here, we explored the possible interaction between duloxetine and SEP-363856 (SEP-856) in depression-related reactions. The results showed that oral administration of duloxetine showed powerful antidepressant-like effects in both the forced swimming test (FST) and the suspension tail test (TST). SEP-856 orally administered alone also exerted an antidepressant-like effect in FST and TST, especially at doses of 0.3, 1, and 10 mg/kg. In addition, duloxetine (15 mg/kg) and SEP-856 (15 mg/kg) both showed antidepressant-like effects in the sucrose preference test (SPT). Most importantly, in the above experiments, compared with duloxetine alone, the simultaneous use of duloxetine and SEP-856 caused a more significant antidepressant-like effect. It is worth noting that doses of drug combination in FST and TST did not change the motor activities of mice in the open-field test (OFT). Thus, duloxetine and SEP-856 seem to play a synergistic role in regulating depression-related behaviors and might be beneficial for refractory depression.     

Chemical Characteristics of Ethanol and Water Extracts of Black Alder (Alnus glutinosa L.) Acorns and Their Antibacterial,Anti-Fungal and Antitumor Properties

The aim of this study was to identify polyphenolic compounds contained in ethanol and water extracts of black alder (Alnus glutinosa L.) acorns and evaluate their anti-cancer and antimicrobial effects. The significant anti-cancer potential on the human skin epidermoid carcinoma cell line A431 and the human epithelial cell line A549 derived from lung carcinoma tissue was observed. Aqueous and ethanolic extracts of alder acorns inhibited the growth of mainly Gram-positive microorganisms (Staphylococcus aureus, Bacillus subtilis, Streptococcus mutans) and yeast-like fungi (Candida albicans, Candida glabrata), as well as Gram-negative (Escherichia coli, Citrobacter freundii, Proteus mirabilis, Pseudomonas aeruginosa) strains. The identification of polyphenols was carried out using an ACQUITY UPLC-PDA-MS system. The extracts were composed of 29 compounds belonging to phenolic acids, flavonols, ellagitannins and ellagic acid derivatives. Ellagitannins were identified as the predominant phenolics in ethanol and aqueous extract (2171.90 and 1593.13 mg/100 g DM, respectively) The results may explain the use of A. glutinosa extracts in folk medicine.     

Asymmetric conductivity of the Kondo effect in cold atomic systems

Motivated by recent theoretical and experimental advances in quantum simulations using alkaline earth(AE)atoms,we put forward a proposal to detect the Kondo physics in a cold atomic system.It has been demonstrated that the intrinsic spin-exchange interaction in AE atoms can be significantly enhanced near a confinement-induced resonance(CIR),which facilitates the simulation of Kondo physics.Since the Kondo effect appears only for antiferromagnetic coupling,we find that the conductivity of such system exhibits an asymmetry across a resonance of spin-exchange interaction.The asymmetric conductivity can serve as the smoking gun evidence for Kondo physics in the cold atom context.When an extra magnetic field ramps up,the spin-exchange process near Fermi surface is suppressed by Zee-man energy and the conductivity becomes more and more symmetric.Our results can be verified in the current experimental setup.     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。     

温度对铌酸锂电光相位调制特性的影响

利用折射率椭球基本理论对线性电光效应进行了分析,对单轴晶体铌酸锂电光相位调制器的温度特性进行了研究。通过计算机进行数值模拟计算,分析了加电场时光通过LiNbO3电光调制器后出射光的相位变化与温度间的关系,得出在横向和纵向调制中温度对相位改变的影响。研究发现,无论在横向还是在纵向调制下,入射光偏振方向不同但其各自受温度影响的相位变化趋势大体一致,即随着晶体中温度的增加而增大。计算结果表明,LiNbO3电光调制的最佳使用方案为：电场沿x主轴方向施加,入射光偏振方向为感应主轴x’方向,且LiNbO3电光调制器粟用横向相位调制方式。     

Dynamical measurements on viscoelastic behaviors of spiders in electro-dynamic loudspeakers

Spiders in electro-dynamic loudspeakers are most commonly concentrically corrugated fabric disks, and their viscoelastic behaviors affect the loudspeaker reproductions. A noncontact dynamic measuring technology is presented by a subwoofer closed box to excite the tested spiders pneumatically with a Laser Doppler Vibrometer (LDV) to measure the velocity of the moving spiders. Correlation techniques were employed to get an accurate and reliable acoustical transfer function between the measured velocity and sound pressure. The Young’s moduli of the tested spider composite materials were derived from the measured vibration modes. The creep effect and the level dependent behaviors of tested spiders were investigated. The results indicate that, the Young’s moduli of the tested spiders are frequency dependent. The mechanical stiffness increases with a small slope in low frequency range while a large slope in high frequency range. The loss factor exhibits the maximum around the resonance frequency, and after that it decreases with increasing frequency. The effective stiffness has a monotonic decrease with input voltage levels and the harder the spider, the less stiffness changes with input levels.     

扫描环形光斑激光束优化研究

激光束的形状和能量分布限定了激光的应用范围,为满足不同的激光加工需要,必须对激光束进行变换。针对实验室用CO2激光器在热处理方面的应用,提出了激光扫描环形光斑光束优化法。基于温度场叠加原理建立了扫描环形光斑温度场的数学模型,模拟其温度场,可得到其温度分布特性;通过实验研究,分析了聚焦光斑与扫描环形光斑在激光淬火中对材料的热作用效果。结果表明,扫描环形光斑能改善激光热处理硬化层分布。理论和实验研究表明,激光扫描环形光斑技术可以实现激光热处理光束的优化,有一定的应用前景。     

Brightness Temperature Emitted by Radiometer Calibration Load at Millimeter Wave Band

In this paper, the DVRT (vector radiative transfer theory of densely distributed random discrete scatters) model to calculate the brightness temperature emitted by radiometer calibration load is presented. It takes the multiple scattering of isolation layer into account, which is neglected by the incoherent homogeneous model often used in calibration. Hence, it works much better than incoherent homogeneous model at millimeter wave band. Furthermore, the iteration of DVRT model is presented, and it proves that the incoherent homogeneous model is just the zero-order solution of DVRT model. Some numerical results are provided in the end.     

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Two-dimensional layered materials are considered ideal platforms to study novel small-scale optoelectronic devices due to their unique electronic structures and fantastic physical properties. However, it is urgent to further improve the light–matter interaction in these materials because their light absorption efficiency is limited by the atomically thin thickness. One of the promising approaches is to engineer the plasmonic environment around 2D materials for modulating light–matter interaction in 2D materials. This method greatly benefits from the advances in the development of nanofabrication and out-plane van der Waals interaction of 2D materials. In this paper, we review a series of recent works on 2D materials integrated with plasmonic environments, including the plasmonic-enhanced photoluminescence quantum yield, strong coupling between plasmons and excitons, nonlinear optics in plasmonic nanocavities, manipulation of chiral optical signals in hybrid nanostructures, and the improvement of the performance of optoelectronic devices based on composite systems.