Modeling hyperelastic behavior of rubber: A novel invariant‐based and a review of constitutive models

A constitutive phenomenological model completing the Gent‐Thomas concept is carried out to formulate laws governing the hyperelastic behavior of incompressible rubber materials. It is shown that the phenomenological Gent‐Thomas model (1958) and the constrained chain model (1992) give similar precise results at small to moderate deformation. On the other hand, comparisons of the outcome of the proposed model with that of the molecular model from the combined concepts of Flory‐Erman and Boyce‐Arruda (2000), and with those of the phenomenological models of Ogden (1982), Yeoh‐Fleming (1997), Pucci‐Saccomandi (2002) and Beda (2005) are made. Residual inconveniences raised by attractive continuum models in rubber elasticity literature have been successfully overcome. Results from both the statistical and phenomenological mechanics concepts are compared with the data of some useful classical materials (rubbers of Treloar, Rivlin‐Saunders, Pak‐Flory and Yeoh‐Fleming). The results permit one to see salient equivalence of the two theories for a more reliable prediction of stress‐stretch response for all states of any mode of deformation. A complete and exhaustive analysis of the Mooney plot that combines small and very large extension‐compression has been quite essential in assessing the validity of models. A method of identification of material parameters is presented and data of the simple tension suffice for the determination of the parameter values. It is shown that the ordinary identification procedures, such as the usual least squares, a very much used numerical method in materials investigation, can be unsuitable in some cases of hyperelastic modeling. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1713–1732, 2007     

粒子鉴别中dE/dx和TOF的权重

在北京谱仪数据分析中,粒子鉴别使用了dE/dx和TOF的信息.在利用dE/dx和TOF联合鉴别粒子时,通常的做法是把两者的χ²值等权重相加(χ²方法).在不同的动量区间,dE/dx和TOF对粒子的鉴别能力不同.本文给出两者联合鉴别时不同动量区间的权重,并构造一个新的线性变量来进行粒子鉴别     

Identification of micro-scale calorimetric devices II

The miniaturized calorimetric devices furnish a reduced working flat surface and permits measurements with extremely low-mass quantities. The experimental sensitivity shows relevant position dependence with x-y surface coordinates and with z-distance. The device identification is realized via a 2-D model based in Fourier general equation. Using the Marquardt method the experimental flat surface device can be identified and the fitted parameters used to simulate the behavior of the experimental system. From the model, the effects of several dissipation configurations can be evaluated. Also, via the RC-analogy, a way to 3-D experimental devices is roughly described. This revised version was published online in July 2006 with corrections to the Cover Date.     

基于极化不变量的飞机目标识别

基于宽带毫米波极化雷达体制背影，通过极化不变量之一的去极化系数，研究了飞机目标的极化散射特性，并提取了极化特征，设计了飞机目标的分类或识别器结构，它能对五种飞机目标进行有效的分类或识别。     

含腔电大尺寸导体目标电磁散射的一体化数值模拟

应用等效原理，通过引入口面上等效磁流将含腔导电目标电磁散射简化为腔内、外两个等效 问题. 腔内问题分段求解并应用级联法获得口面等效导纳矩阵；腔内外的耦合关系应用近似 边界元方法描述并由此获得口面等效磁流；最后，这一具有混合源的腔体内外一体化散射问 题则应用所提出的广义混合场积分方程方法建立电磁模型，并用多层快速多极子方法实现高 效数值求解. 实例计算结果与测试结果具有很好的一致性. 关键词： 含腔目标 电磁散射 混合场积分方程 数值分析     

一种基于粒子滤波的测向定位跟踪算法

基于多站测向定位提供的目标辐射源方位角信息,提出了一种基于粒子滤波的测向定位跟踪算法.该算法采用序贯蒙特卡罗的粒子滤波技术,对目标辐射源方位信息进行粒子滤波融合处理,实现了对机动目标辐射源的无源定位跟踪.仿真实验表明,该算法适用于非线性模型和非高斯噪声的目标跟踪,与传统的基于卡尔曼滤波的多传感器融合跟踪算法相比,定位跟踪更为精确,从而对提高战场电子目标定位跟踪和精确打击具有广泛的应用价值.     

一个安全有效的身份鉴别协议与对应的数字签名方案

本文利用二元一次不定方程和Schnorr身份鉴别协议，构造出一个新的身份鉴别协议，该协议在RSA问题和离散对数问题是难解的假设下是安全的，同时给出了所对应的数字签名方案。     

基于ARX模型的压电智能结构振动预测控制

采用预测控制法对压电智能结构的振动主动控制进行了实验研究，通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。实验结果验证了该方法在压电智能结构振动主动控制中的可行性和有效性。     

CDMA时变色散信道的两级盲辨识算法

本文通过对时变信道的扩展函数在时频域进行正则采样，得到了CDMA时变系统的离散正则模型。针对该模型提出了一种具有较低运算量的两级盲辨识算法。为避免两级算法产生的误差传播效应，文章将理想SIMO模型等效为加性噪声模型来处理。与基展开模型方法相比，该算法具有不需利用观测数据的高阶统计量估计展开基频率的优点。文章通过仿真验证了该算法是可行的。     

红外小目标与背景辐射对比度的研究

红外目标与背景的对比度特征是红外探测系统检测的重要特征。研究了目标和背景在探测器上的辐射照度,提出了一种红外小目标与背景的辐射对比度,分析了该目标与背景对比度的相关因素。