Use of non-segmented flow,post-columns reaction detection with miniaturized HPLC systems

Summary The use of non-segmented flow, post-column reaction detection is evaluated for use with miniaturized HPLC. Non-segmented open-tubular reactors with internal diameters 0.1 mm to 0.25 mm and packed-bed reactors with internal diameters of 1 mm, filled with 5 and 10 m particles are evaluated theoretically and experimentally with respect to band broadening and pressure drop characteristics. An integrated system consisting of miniaturized HPLC (1 mm i. d.) columns and compatible hardware is described. An example of the separation of catecholamines is given.     

Dynamics of the formation of two-dimensional ordered structures

The growth of ordered domains in lattice gas models, which occurs after the system is quenched from infinite temperature to a state below the critical temperatureT _c, is studied by Monte Carlo simulation. For a square lattice with repulsion between nearest and next-nearest neighbors, which in equilibrium exhibits fourfold degenerate (2×1) superstructures, the time-dependent energy E(t), domain size L(t), and structure functionS(q, t) are obtained, both for Glauber dynamics (no conservation law) and the case with conserved density (Kawasaki dynamics). At late times the energy excess and halfwidth of the structure factor decrease proportional tot ^–x, whileL(t) t ^x, where the exponent x=1/2 for Glauber dynamics and x1/3 for Kawasaki dynamics. In addition, the structure factor satisfies a scaling lawS(k,t)=t ^2xS(kt^x). The smaller exponent for the conserved density case is traced back to the excess density contained in the walls between ordered domains which must be redistributed during growth. Quenches toT>T _c, T=T_c (where we estimate dynamic critical exponents) andT=0 are also considered. In the latter case, the system becomes frozen in a glasslike domain pattern far from equilibrium when using Kawasaki dynamics. The generalization of our results to other lattices and structures also is briefly discussed.     

Direct determination of the enantiomeric purity of oxyphenonium using chiral HPLC with post-column extraction detection

Summary A method is described for the determination of the enantiomeric purity (enantiomeric excess) of the anticholinergic drug oxyphenonium. The method for this quaternary ammonium compound is based on the direct HPLC analysis with a chiral stationary phase. Two kinds of 1-acid glycoprotein-bonded phases were used.For the detection a post-column extraction with fluorescence detection of the ion-pair counter ion dimethoxyantracene sulphonate was used.     

Comparison of combustion sources for sulfur chemiluminescence detection

Three different types of SCD combustion source have been evaluated for use in the chromatographic analysis of atmospheric sulfur compounds. The conventional FID source and the newer inverted burner source were found to be less sensitive and less stable than the flameless design. Overall, the flameless source was superior for use with HRGC-SCD.     

RELATIONSHIPS BETWEEN X—H STRETCHING OVERTONE FREQUENCIES AND BOND LENGTHS/BOND ANGLES

A relationship between the X-H (X = N, O, C, and so on) equilibrium bond length in a Morse oscillator and the X-H stretching overtone frequency shifts is obtained theoretically. We use the equation to discuss the empirical linear relationships that have been proposed for heterocyclics, alkanes and fluorinated benzenes. On the other hand, a unified relationship between the X-H bond angles and the experimental quantities (ω(?) and the coupling strength λ) is also presented for XH2, XH, and XH4 molecules or molecular fragments. Calculations of X-H bond angles for a number of molecules show that the results from our equations are in excellent agreement with the experimental values. Also we can extract the information of relative magnitude of bond coupling force field.     

Capillary electrophoresis separation of heterocyclic nitrosoamino acid-conformers at sub-ambient temperatures

The separation of a selected group of naturally occurring, heterocyclic nitrosoamino acids was achieved by capillary zone electrophoresis and the resolution of the syn and anti conformers improved as the temperature was lowered to 5 °C. The double peaks observed for each nitrosoamino acid are probably caused by the slow kinetics of conformational isomerism. The experimental setup consisted of a P/ACE 5510 electrophoresis system, a 57 cm polyacrylamidecoated capillary, and a 10 mM phosphate buffer, pH 7.2, containing 2 mM of 3-(N-N-dimethylmyristylammonio)propanesulfonate (DMMAPS) and 0.1% Tween 20. Our study shows that (a) the lower the temperature, the greater the resolution and the longer the migration times; and (b) different nitrosoamino acid conformers were resolved at different temperatures because of differences in the rate of isomerization. For example, the conformers of N-nitrosothiazolidine-4-carboxylic acid were partially resolved at 30 °C while those of N-nitrosoproline were well resolved at the same temperature.     

Functionalized naphthol[2,3-h] quinoline-7,12-diones

The addition of secondary and primary amines to ethyl (1-amino-9,10-anthraquinon-2-yl)propynoate affords an easily separable mixture of the corresponding ethyl 3-dialkylaminoor 3-alkylamino-3-(1-amino-9,10-anthraquinon-2-yl)acrylate and 3-dialkylamino- or 3-alkylaminonaphthol[2,3-h]quinoline-2(1H), 7,12-trione (in ∼4: 1 ratio). Intramolecular cyclization of the resulting substituted ethyl acrylates results in the formation of 4-dialkylaminoor 4-alkylamino-2-chlorinated pyridine rings. Subsequent nucleophilic substitution of the chlorine atom gives 2-functionalized 4-dialkylamino- or 4-alkylaminonaphtho[2,3-h]quinoline-7,12-diones. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2327–2332, November, 1998.     

Indirect thermal lens detection for capillary electrophoresis

Thermal lens detection with a 325.0 nm He-Cd excitation laser is used for thermooptical indirect detection in combination with the capillary electrophoretic separation of organic anions. The optimization of indirect thermooptical detection is discussed. With Mordant Yellow 7 (an azo dye) chosen as a probe ion limits of detection for 1-heptane-, 1-pentane-, 1-butane-, 1-propanesulfonic, and acetic acid at a level of n × 10⁻⁷ M were achieved with a separation electrolyte containing 50 μM of the probe ion and 5 mM Tris pH 9.90. A further increase in the detection sensitivity (twofold decrease in the limit of detection ) was obtained with a separation electrolyte containing a volume fraction of 20% acetonitrile.     

Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.