针对虫洞攻击的无线传感器网络安全定位方法

节点定位技术是无线传感器网络的关键技术之一,是很多基于无线传感器网络的应用的基础。然而,无线传感器网络通常部署在无人值守的敌对环境中,攻击节点能够很容易地破坏网络中节点的定位过程。本文针对无线传感器网络中距离无关的定位技术,分析了虫洞攻击对DV-Hop定位过程的影响,提出了一种无线传感器网络中抵御虫洞攻击的DV-Hop安全定位方法。仿真结果表明所提出的安全定位方法能够有效降低虫洞攻击对DV-Hop定位过程的影响,验证了该方法的有效性。     

甚长基线近区时差测向联合定位及特性分析

双站协同无源制导是一种全新的反辐射导引体制,具有隐蔽性高、抗干扰能力强等特点。针对此应用中末制导阶段的目标无源协同定位问题,构建了甚长基线近区时差测向无源定位模型,分析了在这个模型下测距精度随测向夹角的变化规律,以及在各种攻击方向上所能达到的定位精度,并利用这个结果分析了无源末制导阶段导弹攻击阵位的优选条件,提高了无源定位精度。最后通过仿真验证了理论分析的有效性,从而为双站协同无源制导和反辐射精确打击等应用提供了新的参考。     

网络入侵检测系统中的漂移检测

目前基于机器学习的入侵检测系统大都建立在入侵数据始终保持统计平稳的假设之上,无法应对攻击者有意改变数据特性或新型攻击方式的出现,而导致的检测率下降的状况.对于上述问题,即攻击漂移,提出了加权Rényi距离的检测方法.在KDD Cup99数据集上的实验证明,Rényi距离可以有效地增强检测效果;在检测到漂移后,通过重新训练模型可以使得对攻击的识别率显著提高.     

Metallomicellar Catalysis: Hydrolysis of Phosphodiester with Cu(II) and Zn(II) Complexes in Micellar Solution

Abstract

The effects of two metal complexes of 2,2′‐dipyridylamine (bpya) ligand, [(bpya)Cu]Cl₂ and [(bpya)Zn]Cl₂, in promoting the hydrolysis of bis(4‐nitrophenyl) phosphate (BNPP) have been kinetically investigated in Brij35 micellar solution and at 298 K, pH ranging from 6.41 to 8.6. In neutral micellar solution at 298 K, pH 7.02, the rate constants for the catalytic hydrolysis of BNPP by [(bpya)Cu]Cl₂ and [(bpya)Zn]Cl₂ are 1.2 × 10⁶ times and 1.5 × 10⁵ times higher than those for the spontaneous hydrolysis, respectively. Kinetic studies show that the active species in the catalytic hydrolysis of BNPP is the aquo‐hydroxy form, and the relative kinetic and thermodynamic parameters indicate that the mechanism of the reaction involves intramolecular nucleophilic attack on the metal center‐bound diester.     

Application of the Combustion Method in a Closed Flask to the Lead Determination in Atmospheric Aerosols

Abstract

The destruction of the filter for metal determination in atmospheric aerosols is an important step in the analysis. Nowadays the decomposition of this kind of sample has not been completely solved, so it is interesting to study new methods for filter sample attack. In the present work the application of the combustion method in a closed flask for mixed cellulose esters filter decomposition for lead determination is proposed. For this purpose optimum operating conditions as stopper flask design, sample size, flask volume, shaking time and volume and concentration of absorbing solution are established, and accuracy and precision of the proposed method using AAS for the measurements is given. The results obtained by the closed flask combustion are compared with those found by wet attack with HNO₃. The method proposed is rapid, has low reagent contamination and no loss of lead by volatilization or by amalgamation occurs. This method shows an accuracy and a precision in good agreement with the standard method.     

Stereocomplementary Routes to Hydroxylated Nitrogen Heterocycles: Total Syntheses of Casuarine,Australine, and 7‐epi‐Australine

Addition of lithiated 1‐benzyloxyallene to a D ‐arabinose‐derived cyclic nitrone occurred with perfect diastereoselectivity furnishing a bicyclic 1,2‐oxazine derivative, which is an excellent precursor for pyrrolizidine alkaloids hydroxylated at C‐7 with optional configuration at this stereogenic center. Depending on the stage of the N? O bond cleavage and ring re‐closure, 7‐hydroxypyrrolizidines with 7R or 7S configuration were obtained, as a result of completely selective addition reactions occurring complementarily at the bottom or top face of the endocyclic C? C double bond in six‐ and five‐membered B rings, respectively. Applicability of these stereodivergent routes to obtain polyhydroxy pyrrolizidine alkaloids is demonstrated by the efficient syntheses of casuarine and australine as examples of the two classes of diversely configured 7‐hydroxypyrrolizidine alkaloids. An alternative synthesis of australine and two strategies for the preparation of 7‐epi‐australine are also reported, which demonstrate that the stereoselectivity of hydride reduction of an exocyclic C? O double bond is independent of the ring size, occurring preferentially from the top face either in a six‐ or five‐membered ring.     

基于RFID的智能跟踪机器人的设计

针对国内各种智能机器人的智能跟踪难这一现状,设计出一种基于RFID技术的智能跟踪的机器人,能实现对携有特定电子标签的目标进行实时跟踪。该机器人以STC89C51单片机为核心,采用有源RFID读写器(HR6020C)和电子标签(WS-HT06)构建定位系统,采用单片机控制L298来驱动机器人的两个后轮,整个系统通过单片机进行整合、计算、处理数据,并发出指令,控制机器人对目标进行跟踪,进而达到机器人的智能跟踪的目的。实验结果表明,该机器人达到了智能跟踪的要求。     

Investigation of damaged interior walls using synchrotron‐based XPS and XANES

Evidence of internal sulfate attack in field exposure was demonstrated by the damaged interior wall of a three‐year‐old house situated in Nakhon Ratchasima Province, Thailand. Partial distension of the mortar was clearly observed together with an expansion of a black substance. Removal of the black substance revealed a dense black layer. This layer was only found in the vicinity of the damaged area, suggesting that this black material is possibly involved in the wall cracking. By employing synchrotron‐based X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near‐edge structure (XANES) techniques, the unknown sample was chemically identified. The S 2p and O 1s XPS results mutually indicated the existence of sulfate species in the materials collected from the damaged area. The XANES results indicated the presence of ferrous (II) sulfate, confirming sulfate‐induced expansion and cracking. The sulfate attack in the present case appeared to physically affect the structure whereas the chemical integrity at the molecular level of the calcium silicate hydrate phase was retained since there was a lack of spectroscopic evidence for calcium sulfate. It was speculated that internal sulfate probably originated from the contaminated aggregates used during the construction. The current findings would be beneficial for understanding the sulfate‐attack mechanism as well as for future prevention against sulfate attack during construction.     

Click‐Tag and Amine‐Tag: Chemical Tag Approaches for Efficient Protein Labeling In Vitro and on Live Cells using the Naturally Split Npu DnaE Intein

Protein labeling with synthetic moieties remains in many cases a technically challenging or unresolved task. Two new and simple concepts are presented. In both approaches, a very short tag of only a few amino acids is prepared with the desired chemical modification and, in a second step, it is transferred to the protein of interest by protein trans‐splicing. For the amine‐tag, a recombinant intein fragment free of lysine residues was generated such that the amine group of the N terminus could be selectively modified with regular amine‐reactive reagents. Thus, standard bioconjugation procedures without any chemical synthesis could be applied without modification of lysines in the protein of interest. For the click‐tag, protein trans‐splicing was combined with unnatural amino acid mutagenesis and subsequent bioorthogonal side chain modification, as demonstrated for click chemistry using p‐azidophenylalanine. By the two‐step strategy, exposure of the protein of interest to the copper catalyst was avoided.     

Functionalization of a cyclo‐P5 Ligand by Main‐Group Element Nucleophiles

Unprecedented functionalized products with an η⁴‐P₅ ring are obtained by the reaction of [Cp*Fe(η⁵‐P₅)] ( 1 ; Cp*=η⁵‐C₅Me₅) with different nucleophiles. With LiCH₂SiMe₃ and LiNMe₂, the monoanionic products [Cp*Fe(η⁴‐P₅CH₂SiMe₃)]^? and [Cp*Fe(η⁴‐P₅NMe₂)]^?, respectively, are formed. The reaction of 1 with NaNH₂ leads to the formation of the trianionic compound [{Cp*Fe(η⁴‐P₅)}₂N]^3?, whereas the reaction with LiPH₂ yields [Cp*Fe(η⁴‐P₅PH₂)]^? as the main product, with {[Cp*Fe(η⁴‐P₅)]₂PH}^2? as a byproduct. The calculated energy profile of the reactions provides a rationale for the formation of the different products.