Analysis of polynuclear aromatic hydrocarbons by glass capillary gas chromatography using simultaneous flame ionization and electron capture detection

The possibility of simultaneous application of an electron capture (ECD) and a flame ionization detector (FID) connected to a glass capillary column for analyzing polynuclear aromatic hydrocarbons (PNA) has been investigated. The ECD/FID ratio is determined for 46 PNA compounds. The ratios vary from 0.02 to 117 with relative standard deviations better than 20 percent determined from 10 replicate analyses. The results suggest that the method may be used for obtaining additional evidence in identifying PNA in environmental samples. Impurities and transformation products in the standard were identified by computerized glass capillary gas chromatography/mass spectrometry. Quinones and diones are responsible for the high EC-response determined in some trace components in the standard. An application of the method is shown for PNA from particulates in urban atmospheres.     

酿造酱油、配制酱油及酿造食醋、配制食醋的鉴别

乙酰丙酸是配制酱油的特有成分，在硫酸溶液中，乙酰丙酸可与香草醛反应而呈现蓝绿色。掺有尿素的酱油在与丁二酮肟、磷酸混合后，加热煮沸会呈现红色。用酱色、食盐等配制的劣质酱油可用测定氨基酸态氮和酱色含量的方法进行鉴别。酿造食醋和配制食醋的常用鉴别方法是碘液法和高锰酸钾法。     

Mass spectrometric methods for the analysis of chlorinated and nitrated isoflavonoids: a novel class of biological metabolites

Electrospray ionization combined with tandem mass spectrometry was applied to a study of some representative chlorinated and nitrated isoflavones-potential metabolites of isoflavones in inflammatory cells. Upon collision-induced dissociation of deprotonated [M - H](-) ions of these compounds, a number of structurally characteristic product ions were produced. The product ion analysis of 3'- and 8-chlorodaidzein in the tandom mass spectra led to ready differentiation of these isomers. 3-Nitro derivatives of both genistein and daidzein have product ions due to the losses of HNO(2) and two OH groups. Chlorinated derivatives of isoflavones were detected in cell-based experiments and their structures were proposed by comparing the tandem mass spectra of their product ions with those of standards. This work provides a suitable analytical basis to aid the characterization of chlorinated and nitrated metabolites in studies in vivo and in vitro.     

Sensitive Voltammetric Sensing of the 2,3‐Dimethyl‐2,3‐dinitrobutane (Dmnb) Explosive Taggant

The highly sensitive voltammetric detection of the 2,3‐dimethyl‐2,3‐dinitrobutane (DMNB), a required additive to commercial plastic explosives, is described. The protocol relies on a fast square‐wave voltammetric measurement of the DMNB explosive taggant at an unmodified carbon fiber electrode using a phosphate buffer (pH 7.0) solution. Different solutions and working electrodes were evaluated. Under the optimal conditions, a linear response is observed over the 300–3000 μg/L DMNB concentration range examined, with a detection limit of 60 μg/L. A highly stable response, with a relative standard deviation (RSD) of 2.6%, is observed for 30 repetitive measurements. Such electrochemical approach offers great promise for a simple, rapid, sensitive and inexpensive field screening of plastic explosives. Preliminary data illustrate the utility of electrochemical detection for electrophoretic microchips for the simultaneous measurements of DMNB, cyclotrimethylenetrinitramine (RDX) and pentaerythritoltetranitrate (PETN).     

Individual determination of ortho and non-ortho substituted polychlorobiphenyls (PCBs) in sediments by high performance liquid chromatographic pre-separation and gas chromatography/ECD detection

Summary An analytical procedure for the individual determination of ortho and non-ortho PCB congeners in sediments, using high performance liquid chromatography (HPLC) preseparation and gas chromatography/ECD detection, is described. Gas chromatography/FTIR spectrometry (GC/FTIR) and gas chromatography/mass spectrometry (GC/MS) were employed for individual congener identification and determination. Sample extraction, clean-up of extract and selective elution procedures were optimized by using reference certified marine sediment samples. Recovery and precision were typically 83% and 16% respectively at 2 ng/g of total PCB content. The proposed procedure, tested by analyzing real sediment samples, showed a reproducibility better than 20% at 13 ng/g PCB level.     

Identification of low molecular weight proteins isolated by 2-D liquid separations

Proteins with molecular mass (M(r)) <20 kDa are often poorly separated in 2-D sodium dodecyl sulfate polyacrylamide gel electrophoresis. In addition, low-M(r) proteins may not be readily identified using peptide mass fingerprinting (PMF) owing to the small number of peptides generated in tryptic digestion. In this work, we used a 2-D liquid separation method based on chromatofocusing and non-porous silica reversed-phase high-performance liquid chromatography to purify proteins for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) analysis and protein identification. Several proteins were identified using the PMF method where the result was supported using an accurate M(r) value obtained from electrospray ionization TOFMS. However, many proteins were not identified owing to an insufficient number of peptides observed in the MALDI-TOF experiments. The small number of peptides detected in MALDI-TOFMS can result from internal fragmentation, the few arginines in its sequence and incomplete tryptic digestion. MALDI-QTOFMS/MS can be used to identify many of these proteins. The accurate experimental M(r) and pI confirm identification and aid in identifying post-translational modifications such as truncations and acetylations. In some cases, high-quality MS/MS data obtained from the MALDI-QTOF spectrometer overcome preferential cleavages and result in protein identification.     

A comparison of electron ionization mass spectra obtained at 70 eV,low electron energies,and with cold EI and their NIST library identification probabilities

Electron ionization (EI) mass spectra of 46 compounds from several different compound classes were measured. Their molecular ion abundances were compared as obtained with 70‐eV EI, with low eV EI (such as 14 eV), and with EI mass spectra of vibrationally cold molecules in supersonic molecular beams (Cold EI). We further compared these mass spectra in their National Institute of Standards and Technology (NIST) library identification probabilities. We found that

1. Low eV EI is not a soft ionization method, and it has little or no influence on the molecular ion relative abundances for large molecules and those with weak or no molecular ions.
2. Low eV EI for compounds with abundant or dominant molecular ions in their 70 eV mass spectra results in the reduction of low mass fragment ions abundances thereby reducing their NIST library identification probabilities thus rarely justifies its use in real‐world applications.
3. Cold EI significantly enhances the relative abundance of the molecular ions particularly for large compounds; yet, it retains the low mass fragment ions; hence, Cold EI mass spectra can be effectively identified by the NIST library.
4. Different standard EI ion sources provide different 70 eV EI mass spectra. Among the Agilent technologies ion sources, the “Extractor” exhibits relatively abundant molecular ions compared with the “Inert” ion source, while the “High efficiency source” (HES) provides mass spectra with depleted molecular ions compared with the “Inert” ion source or NIST library mass spectra.

These conclusions are demonstrated and supported by experimental data in nine figures and two tables.     

Application of diode array detectors for solute identification in toxicological analysis

Summary The possibilities and limitation of automated solute identification via UV/VIS spectroscopy in HPLC are demonstrated and applications in toxicologic analysis are described. A standard isocratic system is used. The influence of various chromatographic parameters on retention time is shown. A retention time window of ±15% is required. In addition to retention time, derived spectral data are calculated (minima and maxima of derivatives, area counts under standardized spectral ranges, absorption at various wavelength) and used for positive solute identification. It is possible to identify solutes with a high degree of certainty in urine and plasma if their concentration is at least 10 ppm.     

Structure-activity relationship of Ca2+ channel blockers: A study using conformational analysis and chemometric methods

Summary A structure-activity relationship study has been done on 8 compounds with the activity known as Ca²⁺ channel blockers. Conformational analysis was carried out using a molecular mechanics method. The 3D-QSAR approach was used and the most polar functional groups present in all the molecules were considered. Eight interatomic distances are necessary to define the relative spatial disposition of these relevant molecular fragments. The structure-activity relationship between interatomic distances and biological activity was performed using statistic and chemometric methods. In particular, with Principal Component Analysis, it was possible to reduce the number of interatomic distances: only six of the eight distances are sufficient to describe the system in a useful way. A classification method was iteratively used to select the most probable conformations linked to the biological activity and to build a model able to classify conformations according to their biological behaviour. Cluster analysis on the active selected conformations subsequently allowed the identification of two different geometrical patterns for the active compounds. Finally the validity of the model was verified by correctly predicting the activity of other molecules not used in the construction of the model but possessing known activity.     

Photolysis of 2-dialkylamino-3-amino(or alkylamino)-1,4-naphthoquinones

Using¹H and¹³C NMR spectroscopy, naphthodihydroimidazolediols were identified as the primary products of photolysis of 2-dialkylamino-3-amino(alkylamino)-1,4-naphthoquinones. Their further non-photochemical (thermal) transformations depend on their structure and on the photolysis conditions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 358–362, February, 1993.