Environmental Determination of Alkylphenol Polyethoxylate Refractory Residues Using Mass Spectrometric Techniques

Abstract

The use of methane chemical ionisation GC/MS gave satisfactory results when applied to environmental analysis of halogenated octylphenol polyethoxylates residues. In addition the selected ion monitoring GC/MS technique has been successfully applied for simulataneous qualitative and quantitative determination of some refractory metabolites of nonylphenol polyethoxylates in secondary sewage effluent and surface waters.     

Trace elements in sediments and bioaccumulation in European silver eels (Anguilla anguilla L.) from a Mediterranean lagoon (SE Italy)

Samples of surface sediments and tissues (liver and muscle) of commercially available European silver eels (Anguilla anguilla L.) collected from Varano lagoon (Italy) were analysed to determine trace element contents. Univariate and multivariate analyses were performed to highlight both the differences between sampling sites and the influence of channel discharges. Atomic ratios indices for sediment data and biological enrichment factors (BEF) for eel tissues were calculated in order to evaluate the enrichment factor due to human activities. The highest levels of As (11.9?µg?g^?1) and Zn (14.1?µg?g^?1) were observed in the south-eastern zone of the lagoon, which is influenced by urban and agricultural discharges. The low levels of Hg observed in this study (0.04?µg?g^?1) led us to exclude both natural and human local sources of this element. Trace element concentrations of all elements were lower in muscle than in liver tissue. Significant enrichment of Cu and Zn was found in livers.     

Highly selective determination of rhodium(III) using silica gel surface-imprinted solid-phase extraction

A novel Rh(III)-imprinted amino-functionalised silica gel sorbent was prepared by a surface imprinting technique for preconcentration and separation of Rh(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with the traditional solid sorbents and non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher adsorption capacity and selectivity for Rh(III). The maximum static adsorption capacity of the imprinted and non-imprinted sorbent for Rh(III) was 29.86?mg?g^?1 and 11.23?mg?g^?1, respectively. The imprinted Rh(III) was removed with 2?mL of 3% thiourea?+?2?mol?L^?1 HCl. The obtained imprinted particles exhibited excellent selectivity and rapid kinetics process for Rh(III). The relatively selective factor (α_r) values of Rh(III)/Ru(III), Rh(III)/Au(III), Rh(III)/Pt(IV), Rh(III)/Ir(IV), Rh(III)/Pd(II) were 26.7, 39.0 29.2, 28.1, 43.7, respectively, which were greater than 1. The detection limit (3σ) of the method was 0.26?µg?L^?1. The relative standard deviation of the method was 1.79% for eight replicate determination of 10?µg of Rh³⁺ in 200?mL water sample. The method was validated by analysing standard reference material (GBW 07293), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace rhodium(III) in geological samples with satisfactory results.     

Synthesis of Thermally Stable Energetic 1,2,3‐Triazole Derivatives

Various thermally stable energetic polynitro‐aryl‐1,2,3‐triazoles have been synthesized through Cu‐catalyzed [3+2] cycloaddition reactions between their corresponding azides and alkynes, followed by nitration. These compounds were characterized by analytical and spectroscopic methods and the solid‐state structures of most of these compounds have been determined by using X‐ray diffraction techniques. Most of the polynitro‐bearing triazole derivatives decomposed within the range 142–319 °C and their heats of formation and crystal densities were determined from computational studies. By using the Kamlet–Jacobs empirical relation, their detonation velocities and pressures were calculated from their heats of formation and crystal densities. Most of these newly synthesized compounds exhibited high positive heats of formation, good thermal stabilities, reasonable densities, and acceptable detonation properties that were comparable to those of TNT.     

Enhanced Magneto‐optical Properties of Semiconductor EuS Nanocrystals Assisted by Surface Plasmon Resonance of Gold Nanoparticles

Remarkable magneto‐optical properties of a new isolator material, that is, europium sulfide nanocrystals with gold (EuS–Au nanosystem), has been demonstrated for a future photo‐information technology. Attachment of gold particles that exhibit surface plasmon resonance leads to amplification of the magneto‐optical properties of the EuS nanocrystals. To construct the EuS–Au nanosystems, cubic EuS and spherical Au nanocrystals have been joined by a variety of organic linkers, that is, 1,2‐ethanedithiol (EDT), 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), 1,4‐bisethanethionaphthalene (NpEDT), or 1,4‐bisdecanethionaphthalene (NpDDT) . Formation of these systems was observed by XRD, TEM, and absorption spectra measurements. The magneto‐optical properties of the EuS–Au nanosystem have been characterized by using Faraday rotation spectroscopy. The Faraday rotation angle of the EuS–Au nanosystem is dependent on the Au particle size and interparticle distance between EuS and Au nanocrystals. Enhancement of the Faraday rotation of EuS–Au nanosystems was observed. The spin configuration in the excited state of the EuS–Au nanosystem was also investigated using photo‐assisted electron paramagnetic resonance.     

Carbon Dynamics on the Molybdenum Carbide Surface during Catalytic Propane Dehydrogenation

The effect of the gas‐phase chemical potential on surface chemistry and reactivity of molybdenum carbide has been investigated in catalytic reactions of propane in oxidizing and reducing reactant mixtures by adding H₂, O₂, H₂O, and CO₂ to a C₃H₈/N₂ feed. The balance between surface oxidation state, phase stability, carbon deposition, and the complex reaction network involving dehydrogenation reactions, hydrogenolysis, metathesis, water‐gas shift reaction, hydrogenation, and steam reforming is discussed. Raman spectroscopy and a surface‐sensitive study by means of in situ X‐ray photoelectron spectroscopy evidence that the dynamic formation of surface carbon species under a reducing atmosphere strongly shifts the product spectrum to the C₃‐alkene at the expense of hydrogenolysis products. A similar response of selectivity, which is accompanied by a boost of activity, is observed by tuning the oxidation state of Mo in the presence of mild oxidants, such as H₂O and CO₂, in the feed as well as by V doping. The results obtained allow us to draw a picture of the active catalyst surface and to propose a structure–activity correlation as a map for catalyst optimization.     

Exploiting Aggregation To Achieve Phase Separation in Macrocyclization

The aggregation properties of poly(ethylene glycol) (PEG) can be exploited in organic synthesis to control dilution effects. Through the use of solvent mixtures containing PEG₄₀₀/MeOH, macrocyclization by Glaser–Hay coupling can be conducted at high concentrations. The origin of the selectivity has been studied by using surface tension measurements, UV spectroscopy, and chemical tagging and demonstrates the dependence of the yield and selectivity on the aggregation of PEG₄₀₀ and its ability to preferentially solubilize organic substrates, resulting in a phase separation from the catalyst system.     

Plasmonic Scissors for Molecular Design

Heterogeneous catalysts play an important role in surface catalytic reactions, but selective bond breaking and control of reaction products in catalytic processes remain significant challenges. High‐vacuum tip‐enhanced Raman spectroscopy (HV‐TERS) is one of the best candidates to realize surface catalytic reactions. Herein, HV‐TERS was employed in a new method to control dissociation by using hot electrons, generated from plasmon decay, as plasmonic scissors. In this method, the N?N bond in 4,4′‐dimercaptoazobenzene was selectively dissociated by plasmonic scissors, and the reaction products formed from the radical fragment (SC₆H₅N) were controlled by varying the pH value. Under acidic conditions, p‐aminothiophenol was produced from the radical fragment by attachment of hydrogen ions, whereas under alkaline conditions, 4‐nitrobenzenethiol was obtained by attachment of oxygen ions to the substrate.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

十二烷基硫酸钠水溶液的动态表面吸附性质

利用MPTC型气泡压力张仪研究了十二烷基硫酸钠(SDS)溶液在不同NaCl 浓度下的动态表面吸附性质, 分析了离子型表面活性剂在表面吸附层和胶束中形成双电层结构产生表面电荷对动态表面扩散过程和胶束性质的影响. 结果表明, SDS在表面吸附过程中, 表面电荷的存在会产生5.5 kJ·mol^-1的吸附势垒(E_a), 显著降低十二烷基硫酸根离子(DS^-)的有效扩散系数(D_eff). 十二烷基硫酸根离子的有效扩散系数与自扩散系数(D)的比值(D_eff/D)仅为0.013, 这表明SDS与非离子型表面活性剂不同, 在吸附初期为混合动力控制吸附机制. 加入NaCl可以降低吸附势垒. 当加入不小于80 mmol·L^-1 NaCl后, E_a小于0.3 kJ·mol^-1, D_eff/D在0.8-1.2之间, 表现出与非离子型表面活性剂相同的扩散控制吸附机制. 同时, 通过分析SDS胶束溶液的动态表面张力获得了表征胶束解体速度的常数(k₂). 发现随着NaCl 浓度的增大, k₂减小, 表明SDS胶束表面电荷的存在会增加十二烷基硫酸根离子间的排斥力, 促进胶束解体.