Reinforcement effect of MAA on nano‐CaCo3‐filled EPDM vulcanizates and possible mechanism

Methacrylic acid (MAA) was used as in situ surface modifier to improve the interface interaction between nano‐CaCO₃ particle and ethylene–propylene–diene monomer (EPDM) matrix, and hence the mechanical properties of nano‐CaCO₃‐filled EPDM vulcanizates. The results showed that the incorporation of MAA improved the filler–matrix interaction, which was proved by Fourier transformation infrared spectrometer (FTIR), Kraus equation, crosslink density determination, and scanning electron microscope (SEM). The formation of carboxylate and the participation of MAA in the crosslinking of EPDM indicated the strong filler–matrix interaction from the aspect of chemical reaction. The results of Kraus equation showed that the presence of MAA enhanced the reinforcement extent of nano‐CaCO₃ on EPDM vulcanizates. Crosslink density determination proved the formation of the ionic crosslinks in EPDM vulcanizates with the existence of MAA. The filler particles on tensile fracture were embedded in the matrix and could not be observed obviously, indicating that a strong interfacial interaction between the filler and the matrix had been achieved with the incorporation of MAA. Meanwhile, the presence of MAA remarkably increased the modulus and tensile strength of the vulcanizates, without negative effect on the high elongation at break. Furthermore, the ionic bond was thought to be formed only on filler surface because of the absolute deficiency of MAA, which resulted in the possible structure where filler particles were considered as crosslink points. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1226–1236, 2006     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.     

Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

An electronic structure investigation of the BNO-BON-NBO system

The potential energy hypersurface of the ground triplet states of the BNO-BON-NBO system has been investigated using traditional ab initio electronic structure theory. The molecules studied have the molecular formula BON and include three linear and three angular species, and two transition states for the isomerization of an angular N-B-O to an angular B-O-N and a linear B-NO, respectively. All stationary points on the BNO-BON-NBO isomerization potential energy surface have been characterized employing UMP2, UMP4, and Gaussian-2 (G2) theory with the 6-311G(d), 6-311G(2d), and TZ2P basis sets. The isomerization for an angular N-BO to the linear B-NO has a lower energy barrier than that of the former to an angular B-ON. Energetics are presented with G2 energies. Two sets of resonance structures for both bent B-NO (boron nitrosyl) and B-ON (boron isonitrosyl) were proposed and the bonding in the two species was analyzed. For the purpose of comparison, the density functional theory based hybrid methods B3LYP/6-311G(d) and B3LYP/TZ2P have also been applied to both geometry optimization and single-point calculations. It is found that the B3LYP prediction of the nature of the linear B-O is contradictory to that made by all MPn(n = 2 and 4) calculations. The cause for this contradiction is discussed.     

Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

Surface Control and Electrical Tuning of MXene Electrode for Flexible Self-Powered Human–Machine Interaction

MXene materials emerge as promising candidates for energy harvesting and storage application. In this study, the effect of the surface chemistry on the work function of MXenes, which determines the performance of MXene-based triboelectric nanogenerator (TENG), is elucidated. First-principles calculations reveal that the surface functional group greatly influences MXene work function:  OH termination reduces the work function with respect to that of bare surface, while  F and  Cl increase it. Then, work functions are experimentally determined by Kelvin probe force microscopy. The MXene prepared by gentle etching at 40 °C for 48 h (GE_40/48) has the largest work function. Furthermore, an electron-cloud potential-well model is established to explain the mechanism of electron emission-dominated charge transfer and assemble a triboelectric device to verify experimentally its conclusions. It is found that GE_40/48 has the best performance with a 281 V open-circuit voltage, 9.7 µA short-current current, and storing 1.019 µC of charge, which is consistent with the model. Last, a patterned TENG is demonstrated for self-powered human–machine interaction application. This finding enhances the understanding of the inherent mechanism between the surface structure and the output performance of MXene-based TENG, which can be applied to other TENG based on 2D materials.     

Atom-probe field ion microscopy

The atom probe field ion microscope (AP-FIM) is a combination of a field ion microscope and a time-of-flight mass spectrometer with a single ion detection sensivity. With the field ion microscope topology of a surface, surface reactions and surface modifications can be studied in atomic detail. By time-of-flight measurements surface layers and interface layers can be chemically analyzed atom by atom and atomic layer by atomic layer. Compositional variations according to surface or interface segregation, precipitations, or surface changes in corrosion or in electrochemical layer formation etc. can be studied quantitatively on a subnanometer scale. Some of our studies on related problems will be decribed briefly.     

STUDIES OF MULTICOMPONENT COMPLEX OXIDE CATALYSTS FOR OXIDATIVE COUPLING OF METHANE VI.SURFACE BASICITY AND SURFACE ACTIVE OXYGEN SPECIES OF LiTi_xLa_(1-x)O_2 λ MULTICOMPONENT OXIDE CATALYSTS

The surface basicity of Ti-La-Li multicoinponent oxides has been investigated by means of CO2-TPD. The experiment results show that C2 (C2H6 C2H4) selectivity is related to surface basic strength. The surface active oxygen species have also been characterized by means of XPS, O2-TPD and so on. It has been indicated that C2 selectivity and CH4 conversion are correlated with lattice oxygen and the adsorbed oxygen on the surface of the catalyst respectively In the O2-TPD experiments, it has also been found that there are three kinds of oxygen species on the surface of the series catalvsts, which are a (100℃ 750℃) Among them α-oxvgen causes deep oxidation whileβand γ oxygen species are related to oxidalive coupling of methane (OCM).     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。     

Mechanism of silicon film deposition in the RF plasma reduction of silicon tetrachloride

Plasma-chemical reduction of SiCl₄ in mixtures with H₂ and Ar has been studied by optical emission spectroscopy (OES) and laser interferometry techniques. It has been found that the Ar:H₂ ratio strongly affects the plasma composition as well as the deposition (r _D) and etch (r _E) rates of Si: H, Cl films and that the electron impact dissociation is the most important channel for the production of SiCl_x species, which are the precursors of the film growth. Chemisorption of SiCl_x and the reactive surface reaction SiCl_x+H–SiCl_(x–1)0+HCl are important steps in the deposition process. The suggested deposition model givesr _D [SiCl_x][H], in agreement with the experimental data. Etching of Si: H, Cl films occurs at high Ar: H₂ ratio when Cl atoms in the gas phase become appreciable and increases with increasing Cl concentration. The etch rate is controlled by the Cl atom chemisorption step.