Fraunhofer Diffraction Pattern by a Slit Aperture between a Knife Edge and a Metal Cylinder

The Fraunhofer diffraction pattern of an aperture formed between a knife edge and a smooth surface of a turned metal cylinder or half cylinder is different from the diffraction pattern of an ideal slit aperture. The diffraction pattern is simulated by adding the light reflected by the cylinder surface to the pattern formed by a slit, and is measured using a cylinder that has been partly cut away so that it can represent either a full or half cylinder. The theoretical and measured patterns agree well with each other.     

Peak effect at microwave frequencies in swift heavy ion irradiated YBa2Cu3O7-δ thin films

The vortex dynamics at microwave frequencies in YBa₂Cu₃O_7-δ (YBCO) films have been studied. We observe a peak in the microwave (4.88 and 9.55 GHz) surface resistance in some films in magnetic fields up to 0.8 T. This is associated with the ‘peak-effect’ phenomenon and reflects the order-disorder transformation of the flux line lattice near the transition temperature. Introduction of artificial pinning centers like columnar defects created as a result of irradiation with 200 MeV Ag ion (at a fluence of 4×10¹⁰ ions/cm²) leads to the suppression of the peak in films previously exhibiting ‘peak effect’.     

Laser‐Induced Self‐Assembled Nanostructures on Electron‐Transparent Substrates

Currently, one of the challenges in high‐resolution transmission electron microscopy (TEM) studies of nanomaterials is to make contamination‐free materials in a simple and time‐efficient way. Here, a method is demonstrated that combines nanosecond‐pulsed laser dewetting of thin films with a film float‐off technique to realize nanostructures (NSs) on electron‐transparent substrates in a robust and rapid manner. NSs of metal (Ag) and bimetals (AgCo, AuCo) ranging from 20 to 150 nm are synthesized on thin carbon film deposited on mica substrates. The NS/carbon system is subsequently transferred onto TEM grids by a float‐off process resulting from debonding of the carbon from mica due to their contrasting hydrophobic nature. This process enables the fabrication of different NSs on flexible and electron‐transparent substrates.     

为什么水在金属表面的吸附构型是倾斜的——水在铜、铝表面吸附的量子化学计算

用量子化学从头算方法,分别以原子簇Ｃｕ５、Ａｌ４、Ａｌ１０模拟Ｃｕ（１００）和Ａｌ（１１１）表面,在不同基组水平上,计算了水在两种金属表面上倾斜吸附的热能面,结果表明：当计算基组中不含氧原子的ｄ轨道时,得到水分子在金属垂直吸附的构型,这与实验结果不符;当水中氧原子加极化函数时,水分子倾斜吸附时能量较低,得到与实验相符的吸附构型。这说明水中氧原子ｄ轨道在计算中起着关键作用,在成键过程中有着重要影响。     

First-principle studies on the electronic structure of Fe3O4(110) surface

The first-principle was employed to study the six possible models for the Fe₃O₄(110) surface, namely the AB-terminated surface (AB model), the AB-terminated with Fe_A vacancy (AB-Fe_A vac model), the AB-terminated with Fe_B vacancy (AB-Fe_B vac model), the B-terminated surface (B model), the B-terminated surface with Fe_B vacancy (B-Fe_B vac model) and the B-terminated surface with O vacancy (B-O vac model). The stability, the electronic structure and the magnetic properties of the six surface models were also calculated. The results predict that the B-O vac model is more stable than other types of surface models. The half-metallic property remain in the AB and B models, while the other four surface models exhibit metallic properties. At the same time, the AB, AB-Fe_A vac, AB-Fe_B vac, B and the B-Fe_B vac models have ferrimagnetic properties, while the B-O vac model has antiferromagnetic property.      

响应面方法计算HTR-10余热排出系统物理过程的失效概率

在核电站安全研究中，概率安全评价方法已经得到了广泛的应用.但是对于采用非能动设计的核电站系统，其可靠性分析的研究还处于初级阶段.非能动系统的失效不但要考虑常规可靠性分析中考虑的设备失效，还要考虑物理过程的失效.物理过程失效概率的计算方法和能动系统可靠性分析方法完全不同.本文给出物理过程失效的数学描述，介绍了一次二阶矩法、响应面方法，并且应用响应面方法计算了清华大学核能技术设计研究院10MW高温气冷实验堆(HTR-10)余热排出系统失效概率的近似值. 关键词： 概率安全评价 非能动系统 可靠性 响应面     

基于微扰近似的圆锥表面光散射*

由Hueygen原理出发,介绍了粗糙表面的光散射特性.基于微扰近似,在不考虑遮蔽效应和圆锥顶点的散射情况下,分析了圆锥物体的光散射特性,推导了圆锥物体对平面光的散射场解析表达式.计算了圆锥表面在高度起伏均方根不同情况下对1.06μm光波的散射,并且得到了入射角一定的情况下,不同观察方向的散射光强分布曲线.结果表明,在观察方位角不变时,圆锥的散射光强随观察角顶角的增加先增大后减小|在观测方位角一定时,散射光强随高度起伏均方根的增加而减小,且随观察方位角呈对称分布.     

天冬氨酸在Cu(001)表面吸附的扫描隧道显微镜研究

用扫描隧道显微镜(STM)研究了室温下天冬氨酸在Cu(001)表面的吸附行为.实验发现,在较 低的覆盖度下,天冬氨酸分子在Cu(001)表面存在两种吸附状态.从STM数据估算出两种吸附 状态下天冬氨酸分子在Cu(001)表面的扩散激活能分别为079±001eV,088±005eV. 随着覆盖度的提高,天冬氨酸分子最终在Cu(001)表面形成一均匀衬度的吸附层,但并不形 成有序吸附结构,也不能使台阶发生小面化.天冬氨酸分子的这些吸附特点是迄今研究过的 所有氨基酸在Cu(001)表面吸附时不具有的. 关键词： 表面吸附 扫描隧道显微镜 氨基酸     

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.     

基于白光干涉彩色图像的微结构表面形貌测量

微结构的表面形貌会显著地影响微纳器件的使用性能及产品质量,是微纳测试领域的一个重要研究方面,利用白光干涉技术是测量物体表面形貌的一种常见方法。区别于常用的CCD黑白相机,使用CCD彩色相机采集白光干涉条纹的彩色图像,使获取的图像包含了R、G、B三个通道的信息。利用小波变换法分别求解出在不同扫描位置处R、G、B通道的相位信息,通过建立的评价函数,并结合最小二乘法可精确确定零光程差的位置,利用相对高度和零光程差位置的线性关系,进而得到物体的表面形貌。通过仿真以及实际测量由VLSI标准公司制造的标准台阶结构,验证了所提出方法的有效性。