偏振显示及椭圆偏振光测量实验

以单束正交线偏振光为光源,利用角向偏振显示器,采用CCD摄像机进行图像采集,利用Matlab软件进行图像处理,设计了一种由He-Ne激光器、角向偏振显示器组成的偏振光偏振方向显示系统,并研究了其角度特性.实验结果表明:系统在起偏器的起偏角分别为0°、90°、180°、270°、360°时,角向偏振显示器偏振显示角度的测量准确度分别为0.480°、0.168°、0.528°、0.421°、0.340°,测量精确度分别为0.208°、0.576°、0.660°、0.603°、0.466°,测量数据拟合曲线的线性相关系数为0.999.结合1/4波片,检偏器和分光比为50:50的分束器,构建了椭圆偏振光测量系统,完成了椭圆偏振光测量实验,椭圆率为0.198.     

基于SDL工具实现雷达信号处理系统一体化开发

研究了基于SDL工具在TigerSHARC硬件平台上实现典型雷达信号处理模块的开发方法,分析了SDL工具在自动生成DSP代码时的几个关键问题,并提出了一种雷达信号处理系统在TigerSHARC硬件平台上的设计、实现、验证一体化解决方案。     

浅析用图像法处理实验数据

指出了图像法在解决物理问题中的优势及应注意的问题,并对用图像法处理实验数据的考题进行了归类．     

小波变换对OCT图像的降噪处理

通过分析光学相干层析成像系统中的噪音源以及不同噪音对成像质量的影响,利用小波变换的方法,结合软阈值滤波对图像去噪,消除噪音对图像的干扰,处理后图像变得清晰了,图像质量得以改善,表明该方法能达到减小图像噪音的目的.     

On the signal-to-noise ratio enhancement of the Doppler process

The output signal-to-noise ratio (SNR) of the ultrasound Doppler process, with and without the commonly used sample and hold circuit, is calculated rigorously, and confirmed by experiment. On the basis of this result it is shown that the use of pulsed Doppler processing without increase of the transmitted power enhances the output SNR of a pulse-echo system observing moving particles by the factor f_rT_t, where f_r is the repetition rate of the pulse echo and Doppler systems and T_t is the transit time of the particles across the range cell. If nonlinear losses are significant, then changing to continuous Doppler operation and lowering the peak transmitted power to maintain the average power constant can produce additional improvement in SNR due to reduced non-linear losses in the transducer and the propagation medium, as well as reduced requirements for transducer damping.     

一种数字摄录一体机的畸变校准方法

畸变是评价光学成像系统像质的一个重要参数。在建立系统的畸变数学模型的基础上,利用计算机辅助方法,通过精确定位被测CCD摄录一体机光学中心的位置,由被测系统采集高精度目标靶的图像,并对数字图像进行处理,实现了对CCD摄录一体机畸变的测量。通过软件对系统进行畸变校正,可使被测系统的畸变测量的相对不确定度达到了0.11%。畸变校正技术可用于电视制导、航空测绘、飞船交汇对接等方面。     

国内非牛顿流体力学进展

非牛顿流体;;本构方程;;流变测量;;流动稳定性;;收缩流动;;聚合物加工;;石油工业;;生物流体力学     

基于视频图像测量的母线折弯技术研究

现有折弯机在母线的角度测量中一般采用光栅尺或编码器,针对这种接触式检测方法存在的局限性,提出了基于视频技术的角度检测方法,这种非接触式测量方法不仅使角度的检测更加方便,而且增加了折弯机机头机械设计的灵活性.分析了母线在进行边缘检测时角度存在跳动的原因,提出了一种通过抑制伪边缘的方法来控制检测角度的不稳定性.以铜、铝母线...     

Face and eyes localization algorithm in thermal images for temperature measurement of the inner canthus of the eyes

In this paper, a novel algorithm for the detection and localization of the face and eyes in thermal images is presented, particularly the temperature measurement of the human body by measuring the eye corner (inner canthus) temperature. The algorithm uses a combination of the template-matching, knowledge-based and morphological methods, particularly the modified Randomized Hough Transform (RHT) in the localization process, also growing segmentation to increase accuracy of the localization algorithm. In many solutions, the localization of the face and/or eyes is made by manual selection of the regions of the face and eyes and then the average temperature in the region is measured. The paper also discusses experimental studies and the results, which allowed the evaluation of the effectiveness of the developed algorithm. The standardization of measurement, necessary for proper temperature measurement with the use of infrared thermal imaging, are also presented.