基于图像处理技术的束流剖面监视系统

 介绍了在兰州重离子加速器上利用荧光靶图像获取装置测量并计算束流剖面参数的方法，并建立了图像获取、处理、束流参数计算的实时测量软件系统。该系统具有可靠性好、测量直观、界面友好等优点。     

Integrated Smart Sensor Calibration

In many applications electronic sensors are used toimprove performance and reliability of measurement systems. Suchsensors should provide a correct transfer from the physical signalto be measured to the electrical output signal. One importantstep to achieve this, is to calibrate each sensor by applyingdifferent reference input signals and adjusting the sensor transferaccordingly. Besides expensive reference equipment the calibrationprocess takes much time and attention per individual sensor,which means a considerable increase in sensor production costs.By including at the sensor or sensor interface chip a programmablecalibration facility the calibration of such smart sensors caneasily be automated and can be executed for a batch of sensorsat a time, thus minimizing the calibration time and costs. Thispaper presents a calibration method and options for integrationin the smart sensor concept, in hardware as well as in software.An advantage of the proposed method is that it does not needa large matrix of calibration data, which needs to be storedin a look-up table or converted into a correction formula, butinstead it uses a step-by-step approach to correct the sensortransfer at each calibration measurement until the error is sufficientlysmall.     

Decomposition Methods for Differentiable Optimization Problems over Cartesian Product Sets

This paper presents a unified analysis of decomposition algorithms for continuously differentiable optimization problems defined on Cartesian products of convex feasible sets. The decomposition algorithms are analyzed using the framework of cost approx imation algorithms. A convergence analysis is made for three decomposition algorithms: a sequential algorithm which extends the classical Gauss-Seidel scheme, a synchronized parallel algorithm which extends the Jacobi method, and a partially asynchronous parallel algorithm. The analysis validates inexact computations in both the subproblem and line search phases, and includes convergence rate results. The range of feasible step lengths within each algorithm is shown to have a direct correspondence to the increasing degree of parallelism and asynchronism, and the resulting usage of more outdated information in the algorithms.     

多传感器目标识别的图像数据融合技术研究

军事和空间技术的要求促进了微光技术的发展。微光图像实时处理技术是夜技术今后发展的重要方向，本文针对微光图像与脉冲激光测距仪的数据信息实时融合与显示的方法及其实现进行了研究。给出了系统框图及工作原理，为实现探测识别、跟踪的实时性、智能化和微型化，从而为研制新一代战术侦察与火控系统提供了具体有效的技术基础。     

STI process steps for sub-quarter micron CMOS

This paper presents Shallow Trench Isolation (STI) process steps for sub-1/4 μ CMOS technologies. Dummy active areas, vertical trench sidewalls, excellent gap filling, counter mask etch step and CMP end point detection, have been used for a 0.18 μm CMOS technology. Electrical results obtained with a 5.5 nm gate oxide thickness show good isolation down to 0.3 μm spacing. Good transistor performances have been demonstrated.     

高功率激光器的光束质量及其对激光加工的影响

本文介绍了光束的模式、评价光束质量的几种方法,着重介绍了国际标准化组织(ISO)提出的光束传输系数M作为评价光束质量的方法。文中还讨论了光束质量对焊接、切割加工的影响;热透镜效应对加工的影响等。     

离散Hopfield神经网络和联想记忆的开关电流技术实现

研究了离散Ｈｏｐｆｉｅｌｄ神经网络（ＤＨＮＮ）和联想记忆神经网络的开关电流技术实现，利用多权输入跨导，开关电流延迟器（ＳＩＤ）和可编程电流比较器（ＰＣＣ）实现了离散Ｈｏｐｉｅｌｄ神经网络，并提出了利用离散Ｈｏｐｆｉｅｌｄ神经网络实现自联想记忆时相应的开关电流电路，所提出了开关电流神经网络适宜于超大规模集成，能在低电压（如３．３Ｖ）下工作。     

Design and performance analysis of beam steering birefringent mercurous chloride acousto-optic device

I.IntroductionThepcrformanccsofAcousto-optic(AO)dcviccareoftenlimitcdbythepropertiesofAOmcdiawhenitisusedinAOsigna1processingsystems.Thespectrumanalyzersandcorre1ationreceivers,forinstancc,areexpcctcdtoimprovcthereso1utionanddynamicrangcwhilereducingtheproccssorvolume.Rccent1y,ancwclassofmateria1s,themercurousha1ides,promiscstocontributeimportantsolutionstosuchnccdsandisrefincdtopractica1uti1izations.Themecurousha1ideweconsidcrinthispapcrismecurouschloride(Hg,C1,).Thesing1ecrystalofHg,Cl…     

Enhanced Image Detection on an ARM based Embedded System

This paper presents a new technique for thedetection of Integrated Circuits within images of Printed Circuit Boards autonomouslyand without the need to be assisted by CAD data. The technique is a key partof a suite of algorithms targeted for an embedded System On Chip architecturebased on the ARM7 platform for real time detection of PCB images for diagnosticpurposes. The technique has a significant reduction in complexity when comparedto conventional approaches such as the Hough Transform. The reduction in complexitymakes the approach ideal for an embedded vision application suchas the one described in this paper. This paper presents the technique, thetarget embedded architecture and results showing the reduction in complexitywhen compared to a Hough Transform.     

长江堤防工程地质信息处理模型及技术方法

长江中下游的主要防洪工程是长江干堤 ,长江堤防线路长、工程浩大、堤基工程地质水文地质条件复杂 ,涉及大量的已有地质数据和资料。今后在整治加固堤防的工程地质勘察工作中 ,还需随时进行数据的收集、存储、检索、分析、统计和维护 ,随时调用这些数据进行综合处理、编制报告和图件 ;在防汛期间可以针对堤防险工险段的险情 ,随时查询和调用有关的资料、数据或者图件 ,提供采取抢险措施决策的地质依据。这既提高了地质数据的利用价值和利用率 ,又保证了信息的准确性、完整性和共享性。因此 ,建立合理的长江堤防工程地质信息处理模型及其成熟的技术方法具有重要的意义。