瑞利衰落信道采用组合发射机SC/接收机 MRC的MQAM性能分析

日益增长的无线业务需求要求提高衰落信道上无线通信的频谱利用率.本文研究一种使用组合发射机SC/接收机MRC(SC/MRC)的MQAM方案,推导其在平坦瑞利衰落信道上的误符号率,分析无线信道时变特性对系统性能的影响.数值计算结果表明该组合空间分集方案可以通过调整发射天线和接收天线的数目来获得比传统接收机分集接收更大的分集增益.     

平面八节点四边形理性元

推导平面八节点四边形理性有限元列式,采用具有直到四次多项式的平面问题的微分方程的解作为插值函数,算例结果表明平面八节点四边形理性有限元的有效性.     

Delay‐dependent criteria on the global attractivity of Nicholson's blowflies model with patch structure

In this paper, we investigate the effect of delay on the asymptotic behavior of Nicholson's blowflies model with patch structure and multiple time‐varying delays. By using the fluctuation lemma and some differential inequality technique, delay‐dependent criteria are obtained for the global attractivity of the addressed system. Meanwhile, some numerical examples are given to illustrate the feasibility of the theoretical results. Copyright © 2017 John Wiley & Sons, Ltd.     

复合材料修补结构腐蚀扩展特性实验研究

为了研究腐蚀环境对复合材料修补结构疲劳特性的影响,开展以某型飞机加速环境谱为基础的预腐蚀试验,并采用递进式的试验方法分别完成对未修补未腐蚀、修补但未腐蚀、又修补又腐蚀的试样疲劳裂纹扩展试验。利用试验数据计算了复合材料修补构型、腐蚀环境对裂纹尖端应力强度因子影响的修正系数,并确定了通过试验验证的修补结构疲劳裂纹扩展修正模型。该模型预测腐蚀环境下修补结构的疲劳寿命与试验值一致。试验数据和预测模型可为海军飞机复合材料修补结构的损伤容限设计提供参考。     

比较法测试不同颜色匹配函数的性能

为了测试不同颜色匹配函数的预测性能,基于灰色、棕色、紫色和蓝色4个目标色,共制作了16对近同色异谱色样对(围绕每个目标色分别制作了4个待比较色),组织14名年龄不同的色觉正常观察者基于心理物理实验方法中的比较法,开展了色差大小比较实验。结果表明,实验组织的老年观察者的锥细胞响应较年轻观察者有所下降,CIE1931的预测性能优于CIE1964。不同颜色区域,各颜色匹配函数的表现各异,在进行某些颜色(如灰色,紫色和蓝色)区域的色度值表征和色差评估时,即便观察视场角大于4°,CIE1931的计算性能仍然优于CIE1964。现有CIE2006匹配函数考虑到晶状体光谱透光率和中央凹的锥细胞光谱响应,下一步可继续强化中央凹锥细胞光谱响应,优化其计算性能。     

Terahertz planar antennas for future wireless communication: A technical review

With the monotonic increasing demand of the higher bandwidth for the next generation wireless communication system, the extension of the operating frequency of the communication system to the millimeter/Terahertz wave regime of the electromagnetic spectrum where several low-attenuation windows exist is inevitable. However, before the commercial implementation of the wireless communication in these low-attenuation windows, there are various obstacles which need to be addressed by the scientists and researchers. The atmospheric path loss is the main obstacle to the full-fledged implementation of the terahertz wireless communication. The remedy to this problem is the use of high-power sources, efficient detectors and high gain antenna systems. This paper reviews these technical issues with the special attention to the planar antennas which might contribute to the compact, inexpensive, and low profile future terahertz wireless communication system design.     

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide (SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38% (4.05 GHz-5.95 GHz) and AR bandwidth of 24.9% (4.4 GHz-5.65 GHz). The bandwidth of the high gain antenna can reach 42.7% (3.95 GHz-6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.     

多极化MIMO信道特性与天线设计*

多极化MIMO技术在高频谱效率和紧凑型MIMO通信系统中具有较大的应用潜力,其信道特性与天线辐射特性和环境散射特性以及它们之间的相互作用密切相关,目前紧凑型、低耦合的多极化MIMO天线设计仍存在很大挑战。本文简要介绍和总结了多极化MIMO信道建模理论、多极化天线实现方式和信道特性测量实验等,并指出存在的一些问题和未来的研究方向。     

太赫兹片上系统中低温砷化镓薄膜光电导天线的研究

太赫兹时域光谱技术是一种在太赫兹频段内,广泛应用的光谱测量技术。这种技术可以用于许多物质的频谱分析,对于研究化学、半导体与生物分子等领域有着无可比拟的作用。然而用该系统进行样品探测时,受回波的影响频谱分辨率较低;受太赫兹波光斑大小以及待测样品与电磁波相互作用距离长短的影响,样品消耗量较多,并且整个系统的占用空间较大,这些局限性都限制了太赫兹时域光谱系统的进一步发展。为了突破太赫兹时域光谱系统的局限性,设计了一种将太赫兹泵浦区、探测区和传输波导集成到一个硅片上的太赫兹片上系统,该系统不仅能够解决上述系统的局限性,还能够省去样品测量前的光路准直环节,使样品的测量过程更加简便,同时集成化的系统也很大程度上提高了太赫兹波传输的稳定性。在太赫兹片上系统中,泵浦区和探测区的光电导天线是由低温砷化镓和金属电极制成,由于受到太赫兹片上系统的高度集成化和低温砷化镓晶体生长条件的限制,如何制备出低温砷化镓半导体薄膜衬底,并将其转移与键合,是太赫兹片上系统研制过程中的关键环节。首先利用分子束外延（MBE）技术制备出由半绝缘砷化镓、砷化镓缓冲层、砷化铝牺牲层和低温砷化镓层构成的外延片,然后利用盐酸溶液与砷化铝和低温砷化镓反应速度差别较大的原理,将200 nm厚的AlAs牺牲层腐蚀掉,从而得到2 μm厚的低温砷化镓薄膜。为了更加高效并且完整地得到低温砷化镓薄膜,研究了盐酸溶液在不同温度和不同浓度下与AlAs牺牲层的选择性腐蚀速率的关系。给出了低温砷化镓薄膜制备过程中盐酸的最佳体积比浓度和最佳温度,即在73 ℃下13.57%的盐酸溶液中进行砷化铝牺牲层的腐蚀。相比于已有工艺,这种腐蚀方法对实验设备的要求较低并且具有较高的安全性。最后,将单层低温砷化镓薄膜转移键合至硅片上,并制成光电导天线的结构。利用飞秒激光脉冲进行激发探测到太赫兹信号。由此说明,低温砷化镓薄膜的获取、转移与键合工艺能够满足芯片级太赫兹系统的制作要求,这为太赫兹片上系统的进一步研制打下了坚实的基础。     

超宽带TEM喇叭天线优化设计与实验

针对用于成像雷达系统的超宽带TEM喇叭天线进行了优化设计,兼顾辐射性能、馈入反射和小尺寸条件,采用平滑渐变结构和加载技术代替原设计,增加了低频电流的回流通道,从而改善了天线的低频特性,增强了其定向辐射能力。在理论分析的基础上对其进行了仿真,并按照仿真结果实际制作了一副天线,对天线进行了测试。仿真与实测结果表明:在电压驻波系数小于2时,该天线具有11∶1的阻抗带宽,较强的辐射能力和良好的定性辐射特性,能够满足雷达系统的需求。